18-Piece Silent Block Tool For VAG Group
For the replacement of bushes on wishbone / trailing arms, wheel bearing housing, lower wishbone downside / inside.
Allows renewing of bushes on the vehicle, when installing.
Applications:
Jetta / Synchro 2006-2012.
VW Golf 5 Plus / Variant.
4-Motion 2005-2012.
Scirocco 2009-2012.
Beetle 2012~.
Eos 2006-2012.
27-Piece Universal Press & Pull Sleeve Set
This precision tool kit is for extracting and drawing in bushes, bearing, seals, etc.
A widely applicable set suitable for a majority of cars, LGV and HGV. Can be used independently (manual operation) or with a suitably sized workshop press and can be reworked (e.g. recess, etc) depending on requirements.
3-Piece Ball Joint Separator
3-Piece Universal Joint With Spring Function; 14”, 38” & 12”
Universal Joints with Spring Function
Flexible U-Joint patented dual springs provide sufficient force to maintain the alignment of the male and female ends of the U-Joint.
Ideal For Narrow Spaces
The dual internal spring provide control of the U-Joint for insertion into narrow work areas, eliminating the problem of loose U-Joints.
Sizes Included
1/4" Dr, 3/8" Dr and 1/2" Dr.
4-Piece Tool Set for Axial Joints/Rack End Removal and Installation Kit, Universal
5-Piece Ball joint Separator Kit
7pc Heavy Duty Coilspring Compressor
To be used on McPherson struts with cylindrical and conical springs.
Contains:Â 1 x telescopic spindle.
3 x chuck couples.
1 x spacer for conical springs.
6 x plastic spring protectors.
Applications:
Audi, Alfa Romeo, BMW, Chrysler, Citroën, Ford, Fiat, Honda, Hyundai, Kia, Land Rover, Mazda, Mitsubishi,.
Nissan, Opel, Peugeot, Porsche,.
Renault, Saab, Seat, Subaru, Suzuki, Toyota, Vauxhall, VW and Volvo.
Adapter for Ford Focus and Mazda 3 Rear Bushes – Installation and Removal
This kit can also be used with Art. 4148, 12 ton hydraulic ram.
Designed to be used in situ with vehicle offering the most efficient method of completing the task.
Make Model Applications.
Ford Focus Mk I (98-07) Remove/Install.
Ford Focus Mk II (98-07) Remove/Install.
Ford Kuga (before 08) Remove/Install.
Ford C Max MPV ((07) Remove/Install.
Mazda 3 (Chassis BK 03-09) Remove/Install.
Mazda 5 (Chassis CR, CW) Remove/Install.
Volvo V50 Estate (04-12) Remove/Install.
Volvo S40 Mk II (03-12) Remove/Install.
Adapters for 67306-WW For Mercedes Sprinter, VW Crafter
New set designed to be used with 67306-WW. Includes a new sleeve to accommodate after-market arms. For use when removing and installing ball joints on Mercedes Sprinter ''95 -''06 and revised 2006 models.
Codes: (901, 902, 903, 904 and 906).
Applications:Â Mercedes-Benz Sprinter from 1995, VW Crafter from 2006, VW LT 1996 - 2006.
Air Installation Tool For CV Boots
Axle Joint Tool 35-45mm
For fast and professional changing of the axle joints of cars and light commercial vehicles.
Automatic clamping of the joint heads and easy assembly of long tie rods because of open construction.
Saves up to 3 hours of working time.
For joint heads Ø 35 - 45mm.
Works with 1/2'' ratchets or 27 mm sockets.
Ball Joint Kit; T4, T5, LT
Ball Joint Remover and Installer for Volvo
Ball Joint Separator 2-Stage
Ball Joint Splitters; 3-Piece
For shifting/pushing the ball joint out of axle legs, drop arms, stabiliser.
Especially for working in narrow spaces.
Suitable only for working on closed joints or joints with centre hole.
Sizes:Â 23x55, 28x55, 34x63mm.
Applications:Â Audi, BMW, Ford, Chrysler, Opel, SAAB, Volvo, VW, Nissan, Toyota.
Balljoint / Tie Rod Separator Set 5-Piece
Balljoint Assembly Set; 21-Piece
heavy duty model with 152 mm pressure fork opening.
the set includes all necessary bushes and pressure plates for.
changing the ball joints on most US, European SUV cars and Transporter.
230 mm pressure spindle.
pressure spindle arm.
pressure bolt for pressure spindle 1/4'' and 3/4'' (long type).
reception bushes 1-3/4 x 2“ / 2-1/4“x 2-1/2“ / 2-3/4“x 3“
reception bushes 2-1/4“ / 1-3/4“ / 1-7/16“ / 2-3/4“ und 2-1/4“
adaptor for reception bushes 2“
reception cup2“ / 2-5/8“ / 2“ / 1-1/4“ / 1-3/4“
assembly cup 1-3/4“.
Balljoint Splitter 8 Ton Hydraulic
Bush Kit for Rear Axle on Ford Focus
Bush Kit for Vauxhall; Rear Axle Bush Kit For Vauxhall Astra 2004-2014, Meriva 2010 onwards and Zafira 2005-201
Bush Tool for Rear Axle on Ford Fiesta MK6 2008 onwards
Bush Tool for Volkswagen Golf 5
Using pressure via the force screw the bushing can be pressed out of the housing with ease and installed via the same method.
Applications:
VW Golf V, VI (03), Plus (05) Remove/Install.
VW Scirocco (08) Remove/Install.
VW Eos (06) Remove/Install.
VW Jetta III, IV (05) Remove/Install.
VW Passat (05) Remove/Install.
VW Sharan (10) Remove/Install.
Audi A3 (03) Remove/Install.
Audi TT (06) Remove/Install.
Seat Altea (04) Remove/Install.
Seat Leon (04) Remove/Install.
Seat Toledo (04-09) Remove/Install.
Seat Alhambra (10) Remove/Install.
Skoda Octavia (04) Remove/Install.
Skoda Superb (08) Remove/Install.
Skoda Yeti (09) Remove/Install.
Bushing Kit for Mondeo and Galaxy S-Max
Bushing Tool Kit For VW Polo N9
Coil Spring Compressor (Wishbone Version)
Universal spring compressor for wishbone/multi-link suspension with angled jaws.
Makes it easier, safer and more convenient to position the tool correctly inside the spring.
Prevents overload and improves safely.
Handles 95% of all cars with wishbone/multi-link suspension rear example VW Touran, Citroen C3, Skoda.
Octavia, Peugeot 107.
Coilspring Compressor; Floor Standing, 1500 kg
Capacity: 1500kg.
Foot operated hydraulic unit with safety chain.
More efficient and quicker than ratchet style compressors.
Yokes are coated in a rubberised plastic to prevent damage and slippage.
Suitable for spring with a diameter of 80 to 175mm.
480mm Max Working Length.
325mm Ram Travel.
Complete with two sets of yokes.
Available separately:
819-1-WW: Replacement Hydraulic Ram.
CV Boot Clamp Pliers
CV Boot Clamp Pliers 260mm
Applications: Earless clamps fitted to axle boots on Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes Benz, Nissan, Opel, Porsche, VAG.
Length: 260mm.
Dipped handles.
Spring loaded action.
Also suitable for thermoplastic axle boots.
Suitable for clamps up to 100 mm diameter, for example Oetiker 168.
CV Boot Plier
CV Joint Puller
CV Joint Puller For LGV
Drive Shaft Squeezing Pliers
Designed to pre-tension the drive shaft circlip during assembly of the outer constant velocity joint.
Suitable for: VW, Audi, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, SEAT, Skoda, Subaru, Suzuki, Toyota Etc.
By holding the driveshaft circlip with the 8022 the outer drive shaft splines can be easily assembled onto the CV joint.