10-Piece Carbide Burr Set
110-Piece Metric & SAE Tap + Die Set
Designed for fine threads in particular.
Made from Tungsten Steel.
Included:
2 tap holders.
2 die holders.
1 T holder.
Each 35 taps and dies in following sizes / flank leads:
4-40UNC, 6-32UNC, 8-32UNC, 10-24UNC.
10-32UNF, 12-24UNC, 12-24UNC, 1/4-28UNF.
1/4-24UNS, 1/4-32UNS, 5/16-18UNC, 5/16-24UNF.
3/8-16UNC, 3/8-24UNF, 7/16-14UNC, 7/16-20UNF.
1/2-13UNC, 1/2-20UNF, 9/16-12UNC, 9/16-18UNF.
5/8-11UNC, 5/8-18UNF, 3/4-10UNC, 3/4-16UNF.
M6X1,0, M8X1,25, M10X1,5, M10X1,0.
M11X1,5, M12X1,25, M12X1,75, M14X1,25.
M18X1,5, 1/8-27NP, 1/4-18NPT.
110-Piece Metric Tap + Die Set M2-M18
Especially for fine threads.
Made from Tungsten Steel.
2 tap holders.
2 die holders.
1 T holder.
Sizes:
M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0.
M6 x 0.75, M7 x 1.0, M7 x 0.75, M8 x 0.75, M8 x 1.0.
M8 x 1.25, M9 x 0.75, M9 x 1.0, M9 x 1.25, M10 x 0.75.
M10 x 1.0, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1.0.
M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1.0, M12 x 1.25.
M12 x 1.5, M12 x 1.75, M14 x 1.0, M14 x 1.25, M14 x 1.5.
M14 x 2.0, M16 x 1.0, M16 x 1.5, M16 x 2.0, M18 x 1.5.
114-Piece Oil Sump Repair Kit
This comprehensive kit has been designed to repair damaged threads in the oil sump.
Can also be used on gearboxes and differential drain plugs.
Simply re-tap the thread and fit the corresponding sump plugs.
The range of sizes in this set allows it to be used on most of the cars and LCV on the market today.
Includes:
Tap: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5 (1 each).
Plugs: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5(6 of each).
Washers: 13, 15, 17, 20, 22 mm (various).
131-Piece Thread Repair Set; M5-M12
For repairing threaded holes.
Minimizes time and expenses.
The set includes the following tools:
5 Twist drills for drilling out the defective threads.
5 Taps.
5 Installation tools for inserting the thread sleeves.
5 Insertion pin breakers for removing the tang in the sleeve.
25 Thread inserts M5 x 0.8mm.
25 Thread inserts M6 x 1.0mm.
25 Thread inserts M8 x 1.25mm.
25 Thread inserts M10 x 1.5mm.
10 Thread inserts M12 x 1.75mm.
19-Piece Left Cutting Drill Bits 1-10MM
24-Piece Surface Sanding Preparation Kit
Quick-swap disks with hoop and loop adhesive backs for quickly changing disks.
Great for removing scratches, rusting, corrosion and gasket materials.
Great for polishing or Deburring on a variety of surfaces.
Also Included: 3 Arbors, Backing Pads, 6mm Shanks.
Grit Disks: 40, 60, 80, 100, 180mm.
Abrasive Pads: 1, 2 & 3''.
30-Piece Metric Tap & Die Set M3-M12
40-Piece Tap & Die Set
Made from hardened carbon steel.
17 hand taps and 17 die stocks for:
Coarse thread: M3 x 0.6 mm - M4 x 0.75 mm - M5 x 0.9 mm - M6 x 1 mm - M7 x 1 mm - M8 x 1.25 mm - M10 x 1.5 mm - M12 x 1.75mm.
fine threads: M3 x 0.5 mm - M4 x 0.7 mm - M5 x 0.8 mm - M6 x 0.75 mm - M7 x 0.75 mm - M8 x 1 mm - M10 x 1.25 mm - M12 x 1.5 mm - 1/8'' NPT27.
1 adjustable tap wrench.
2 die holders.
1 screw pitch gauge.
1 screwdriver slot SL.
45-Piece Tap + Die Set M6-M24
20 taps for internal threads and 20 dies for external threads (one each size):
Pitch 0, 75: M6.
Pitch 1, 00: M8-M6.
Pitch 1, 25: M8-M10.
Pitch 1, 50: M10-M12-M14-M16-M18-M20-M22-M24.
Pitch 1, 75: M12.
Pitch 2, 00: M14-M16.
Pitch 2, 50: M18-M20-M22.
Pitch 3, 00: M24 each.
1 adjustable tap wrench.
1 T-type tap wrench.
1 die holder.
1 adaptor for die holder.
1 plain slotted screwdriver 6mm.
Made from Tungsten Steel.
64-Piece Oil Plug Thread Repair Set
64-Piece Oil Sump Repair Kit
8-Piece Thread Repair Kit For Drive Shafts
Properly repair or renew damaged threads on axle spindles.
Rethreading dies are highly tempered for strength & durability and are 6-pt. shaped for use with a socked or wrench.
Rethreading tools are color-coded for quick visual identification.
Contents: M20X1.25, M20X1.5, M22X1, M22X1.5, M24X1.5, M24X2.0MM, 3/4'' X20 UNEF, 13/16'' X20.
Burrs; Carbide, Long, 7-Piece
Burrs; Carbide, Short, 7-Piece
Drill Bit Set, Fully Ground Cobalt Extra Stubby; 19-Piece Set
Drill Bit Set; Cobalt, 19-Piece Set
Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm.
Advanced 118 degree Fully ground Split Point.
Short chisel edge for reduced drilling resistance.
Suitable for drilling in steel, cast iron, non-ferrous metals, alloyed & non-alloyed material.
Drill Bit Material: HSS 4241 Cobalt.
Long lasting working capacity.
Drill Bit Set; Fully Ground HSS, Titanium Coated; 230-Piece Set
Fully ground from solid material (HSS) and titanium coated.
These drills are ideal for pairing alloyed & unalloyed steel with a tensile strength up to 800 N/mm², other metals, cast iron & hard plastics.
10 of each size: 1, 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 10mm.
5 of each size: 9, 9.5, 10.5, 11, 11.5, 12, 12.5, 13mm.
Drill Bit Set; Fully Ground, 170-Piece Set
Drill Bit Set; Fully Ground; Cobalt, 170-Piece Set
Drill manufactured to DIN 338.
Ground from solid material.
1.0-8.0 mm ascending to 0.5mm: 10 pieces each.
8.5-10.0 mm ascending to 0.5mm: 5 pieces in metal box.
These drills are ideal for pairing alloyed & unalloyed steel with a tensile strength up to 800 N/mm², other metals, cast iron & hard plastics.
Drill Bit Set; Fully Ground; Cobalt, 25-Piece Set
Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm.
Advanced 118 degree Fully ground Split Point.
Short chisel edge for reduced drilling resistance.
Suitable for drilling in steel, cast iron, non-ferrous metals, alloyed & non-alloyed material.
Drill Bit Material: HSS 4241 Cobalt.
Long-lasting working capacity.
Drill Bit Set; Twist Drill Set HSS Titanium nitrated 1 – 10 mm 170-Piece
Titanium Nitrated Coating:
Twisted drill bits roll forged and coated with titanium nitrate allowing for increased durability & long lasting strength.
Strong & Long Lasting Drill Bits:
Drills manufactured in accordance with DIN 338.
For Drilling in Various Materials:
Suitable for drilling plastics, wood, steel, cast iron,non-ferrous metals, alloyed & non-alloyed material.
Sizes Included:
1.0-8.0 mm (in 0.5mm steps): 10 piece each.
8.5-10.0 mm (in 0.5mm steps): 5 piece each.
Drill Out Kit with Guides; Universal
External Deburring Chamfer Tool 3-19mm
External Deburring Chamfer Tools; 2-Piece Set
External Deburring Chamfer Tools; 2-Piece Set
Flap Disk Welzh Slotted, Aluminum Oxide 40 Grit ;115 mm (20 per Box)
Welzh Slotted Flap Disk have been innovatively engineered to see through whilst Grinding which allows for superior working compared with standard flap disk, Alows even grinding results. Ideal for processing thin metal sheets. Prevents undesired excessive grinding Reduction of processing faults. Better surface quality as a result of more targeted work. Cool grinding due to fan effect. Reduction of temperature on the surface prevents undesired blue colouring of the workpiece. Good, steady guidance. Notice: When only wood or plastics are ground, the disc must be cleaned by grinding on a sharp-edged iron tool. General steel construction: * Welding seam preparation and post-processing. * Derusting. * Removal of scale (in small quantities). * Grinding of wrought ironwork (grills, railings, banisters handrails). * Removal of excess zinc on weld seams before plastic coating. Stainless steel processing: * Pipeline construction, tank and container construction. * Apparatus construction (chemical industry). * Plant construction, e.g. brewing and food industry. * Boat building. Aluminium processing (all non-ferrous metals): * Special vehicles, such as silo vehicles, ambulances, fire engines etc. * Ship-building. * Aircraft construction. Agricultural machinery: Sharpening of blades (lawn mowers, reciprocating finger bar mowers). Body construction.??Accident repairs: * Paints and filler compounds, MIG solder seams. * Special vehicle construction (lorry attachments, servicing, wearing parts for bulk material transporters). Wood and FRP processing. Precise surfaces or edge corrections.
Flap Disk Welzh Slotted, Aluminum Oxide 60 Grit ;115 mm (20 per Box)
Welzh Slotted Flap Disk have been innovatively engineered to see through whilst grinding which allows for superior working compared with standard flap disk.
Alows even grinding results. Ideal for processing thin metal sheets.
Prevents undesired excessive grinding Reduction of processing faults.
Better surface quality as a result of more targeted work.
Cool grinding due to fan effect.
Reduction of temperature on the surface prevents undesired blue colouring of the workpiece.
Good, steady guidance.
Notice:
When only wood or plastics are ground, the disc must be cleaned by grinding on a sharp-edged iron tool.
General steel construction:
* Welding seam preparation and post-processing.
* Derusting.
* Removal of scale (in small quantities).
* Grinding of wrought ironwork (grills, railings, banisters handrails).
* Removal of excess zinc on weld seams before plastic coating.
Stainless steel processing:
* Pipeline construction, tank and container construction.
* Apparatus construction (chemical industry).
* Plant construction, e.g. brewing and food industry.
* Boat building.
Aluminium processing (all non-ferrous metals):
* Special vehicles, such as silo vehicles, ambulances, fire engines etc.
* Ship-building.
* Aircraft construction.
Agricultural machinery:
Sharpening of blades (lawn mowers, reciprocating finger bar mowers). Body construction.??Accident repairs:
* Paints and filler compounds, MIG solder seams.
* Special vehicle construction (lorry attachments, servicing, wearing parts for bulk material transporters).
Wood and FRP processing.
Precise surfaces or edge corrections.