Engine Tools – German Specialist Tools – Netherlands

Nox Sensor Tap Kit M20X1.5 & M22X1.5

WPAdmin — Wed, 04 Jan 2023 11:12:37 +0000

Damage Free Restoration The removal of the NOX sensor usually causes damage to the threads as a normal tap is too long, and it might be placed at an angle that provides the new sensor with an incorrect mounting position within the exhaust. The damage can also be caused by the high variation in temperature and carbonization. The WELZH kit allows for damage free restoration of the NOX sensor hole thread, with the alignment guides ensuring it is at the correct angle. Extra Short Can be used with a socket or ratchet for hard to reach areas. Time and Money Saver No need for a new exhaust system. Universal For diesel particulate filter, any exhaust sensors, and those in a catalytic convertor.

Diesel High Pressure Pump Test Kit

WPAdmin — Wed, 04 Jan 2023 10:35:19 +0000

Essential tool for accurately measuring the high pressure fuel circuit of diesel common rail systems. Features 2,000bar gauge, pressure relief valve and high pressure flexible hoses. The kit also includes a set of dummy pump regulator and injector pipe blanks. Kit allows for a variety of tests to be conducted: - Engine cranking/running pressure test. - Maximum pump pressure test. - Pump pressure regulator test. - Injector leakage test.

Diesel Injector Extractor; For M9R

WPAdmin — Mon, 12 Dec 2022 09:11:27 +0000

Applications: M9R 2.0 DCI, Renault: trafic, Opel/Vauxhall: Vivaro, Nissan: Primaster. Used to remove seized or corroded diesel injectors.

Vibration Mate Injector Removal Tool

WPAdmin — Fri, 23 Sep 2022 14:52:46 +0000

[video width="640" height="640" mp4="https://germanspecialisttools.com/nl/wp-content/uploads/2022/09/306842693_176708464893067_8503936663318702797_n-1.mp4"][/video] - Specially designed by WELZH to combine vibrations & Pneumatic force to allow for the easy removal of seized injectors. - Comes complete with a universal adaptor set that cover Bosch , Delphi , Denso, Siemens CR injectors which has solenoid coil or screw connections. - Covers 99% of injectors.

Fuel Pump Sprocket Holding Kit-for Vauxhall 1.6 CDTI

WPAdmin — Mon, 12 Jul 2021 11:56:00 +0000

Pump Sprocket Holding Kit Helps to hold the pump sprocket in place stopping the drive chain dropping into the engine causing damage and rebuild.
Kit includes slide hammer to extract the sprocket.
New sprocket blanking will be required – OEM part number 5557422.
Applications: Vauxhall Astra (2013 – 2018), GTC (2015 – 2018), Insignia (2015 – 2018), Meriva (2013 – 2017), Mokka (2014 – 2018), Zafira (2013 – 2018).
Engine Applications: 1.6 CDTI diesel, LVK/B16DTR, LVL/B16DTH, LWQ/B16DTC, LWQ/B16DTE, LWV/B16DTU.
Equivalent to OEM EN-50885 Includes slide hammer to extract the sprocket blanking plate. New sprocket blanking plate will be required – OEM part number 5557422

Air Dryer – Filter Removal Tool For HGV

WPAdmin — Mon, 12 Jul 2021 11:35:00 +0000

Welzh has specially designed this tool to allow for the removal and replacement of the bayonet rings on the brake air dryer cartridge housing used on many HGVS.
Example Volvo and Renault HGVs fitted with a Knorr-Bremse air dryer.
Service tool for the safe removal & installation of air dryer bayonet rings, without causing damage during removal.
Applications include: Knorr-Bremse braking system air dryer cartridge, as used on Volvo & Renault HGVs.
Equivalent to OEM tool K162153K50.
Use with 1/2″D extension & ratchet.

5-Piece Male Drain Plug Key Set

WPAdmin — Mon, 12 Jul 2021 11:22:00 +0000

Double Ended Male Drain Keys:
Fits with various common vehicle oil drain plugs on engines, gearboxes, and back axles.

Double Ended Sizes Included:
14-17mm Hex,10-12mm Hex,9mm Hex,8-13mm square, 11mm-3/8″ square.

Applications includes:
BMW, Citroën, Ford, Lancia, Mazda, Mercedes-Benz, Nissan, Peugeot, Renault, Saab, Volkswagen.

Other Specifications:
Can be used with 19mm socket or spanner.
Manufactured from chrome vanadium.

5-Piece Auxiliary Belt Tensioner Set

WPAdmin — Mon, 12 Jul 2021 11:10:00 +0000

Auxiliary Belt Tensioner Set
Provides a safe and controlled method of adjusting the tensioner position during removal and installation of the auxiliary belt.
The tensioner features a raised peg, which acts as a location to apply leverage to the tensioner to remove or install the belt.
Contains a series of adaptors, along with an extension bar to allow easy purchase on the raised peg, which can then be used with an appropriate tensioner wrench and low profile thin walled socket such as the items contained in the set.
Applications; 1.4 / 1.5 / 1.6 / 2.0 / 2.2 Diesel Engines FORD – PSA, 2.0 / 2.2??DW10 and DW12 engines.

33-Piece Radiator Pressure And Cooling System Tester

WPAdmin — Mon, 12 Jul 2021 10:47:00 +0000

Allows easy testing for leakage in radiator system and quick change of coolant.
Unit is suitable for domestic and commercial vehicles.
Colour coded radiator test caps make it easy to choose the suitable test cap for the job.
Special design of vacuum purge & refill tool connection fits nearly all type of radiator opening.
Test Range 0-35 psi (0-2.5 bar).
Universal Radiator Pressure Test Included
The following adapters for the following vehicles are Included:
Mercedes Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper, VW, BMW, Ford, Opel, Porsche, Audi, etc.

551-Piece Injector Seal Master Kit

WPAdmin — Thu, 07 Oct 2021 13:10:24 +0000

Includes following copper rings, suitable for:
30x Ø15.0×8.0x1.5 – Universal.
12x Ø15.0×7.0x1.5 – Mercedes.
30x Ø13.0×7.5×2.5 – Renault.
30x Ø15.0×7.5×1.5 – Iveco Ford BMW MAN.
30x Ø15.0×7.5×2.0 – Iveco Ford BMW MAN.
30x Ø15.45×8.0x2.0 – Universal.
12x Ø13.5x10x2.0 – Mazda.
30x Ø15.5×7.5×2.5 – Ford.
12x Ø15.5×7.5×1.5 – Land Rover.
30x Ø15.0×7.5×3.0 – Renault.
12x Ø13.0×7.0x1.5 – Deutz.
30x Ø13.5×7.5×1.5 – Ford.
12x Ø15.0×7.5×1.5 – Fiat.
12x Ø15.5×7.5×1 – MAN Rover.
30x Ø16.5×7.5×2 – Mercedes.
12x Ø13.7×7.3×2 – Kia.
12x Ø13.7×7.3×2 – Kia.
50x Ø10×6.0x1.0 – steel rings.
30x Ø15.8×7.5×3.0 – brass rings.
20-Universal plastic injector T-shape.
Aluminium Washers x 30.
30-Universal- plastic injector L-shape.
Springs 25pcs.