Universal Suspension and Steering – German Specialist Tools – Netherlands

Truck Wheel Separator For Dual Wheels

WPAdmin — Wed, 12 Aug 2020 14:05:10 +0000

Designed to remove dual steel wheels which have become seized together over time.
The special design of the tool clamps on to the outer rim of each wheel.
Can be used with pneumatic tools making the task much easier.
Huge time saver.
Suitable for use on a wide range of vehicles e.g. HGV’s, buses, trailers, vans, motor-homes etc.

Tie Rod Spanner 4-Link Suspension On VAG Models

WPAdmin — Wed, 12 Aug 2020 13:58:35 +0000

For adjusting the toe-in quickly & precisely.
This tool prevents the rubber connection from damage with its special bridged design.
Cost and time effective.
Applications: Audi A4 from `94, A6 from `00, A8 from `02, Seat Exeo from`10.
Can also be used on many other VAG Group vehicles.
The only tool that will fit perfectly to the tie-rod.

Tie Rod Remover; Inner, Universal 27-42mm

WPAdmin — Wed, 12 Aug 2020 13:56:38 +0000

For removing the inner tie rod without dismantling the rack and pinion.
Universal applications with a range of 27 to 42mm.
Should be used with a 1/2 drive ratchet.

T50 Torx From 8109-WW

WPAdmin — Wed, 12 Aug 2020 13:54:37 +0000

T50 Torx From 8109-WW

Suspension Screw Extractor for VAG; 4-link Suspensions

WPAdmin — Wed, 12 Aug 2020 13:52:49 +0000

Special tool to remove the clamping screws on four wishbone front axles.

Applications:
Audi, SEAT, Skoda, VW.
To be used with a air hammer.
10mm round shank.
Can be used with 1070-WW vibro gun.

Strut Mate™ Jack-Mounted Strut Supporter

WPAdmin — Wed, 12 Aug 2020 13:49:37 +0000

Provides a highly efficient solution for supporting and holding the strut in place while working on the vehicle.
To be used in conjunction with a transmission jack.

Steering Wrack End Remover Tool 22-55mm

WPAdmin — Wed, 12 Aug 2020 13:47:32 +0000

For fast and professional changing of the axial joints of cars and light commercial vehicles.
Automatic clamping of the joint heads.
Can be used without removing the rack and pinion.
Saves up to 3 hours of working time for joint heads Ø 22 – 55mm.
Works with 1/2” ratchets.

Steering Wheel Level

WPAdmin — Wed, 12 Aug 2020 13:45:55 +0000

A must-have for quick and precisely even steering wheel assembly.
Avoid reassembly of leant steering wheels that are only recognized after test drive.
Much more accurate than the mechanics eyes alone.

Shock Absorber Tool Kit

WPAdmin — Wed, 12 Aug 2020 13:44:00 +0000

Fits most popular vehicle types.
For repair jobs on shock absorbers and for retaining the shock absorber piston.

Includes:
Ratchet, reversible.
Allen inserts: length 122 mm, 16 – 17 – 18 – 19 – 21 – 22 – 24mm.
Hexagon socket inserts, length 122 mm, 6 – 7 – 8mm.
Special inserts, (oval), length 122 mm, 5×8 – 6×8 – 7, 1×9, 6mm.
Porsche Cayenne S, VW Touareg, 6-hexagon inserts, length 122mm.
7 mm for Mercedes Benz Vaneo, 8 mm for BMW, 9 mm for Opel.
Corsa B, Astra F / G, Vectra B, T50, length 122 mm for Opel Astra H.

Rack End Removal and Install Kit, 28-35mm

WPAdmin — Wed, 12 Aug 2020 13:34:22 +0000

For fast and professional changing of the axle joints of cars and light commercial vehicles.
Automatic clamping of the joint heads and easy assembly of long tie rods because of open construction.
Saves up to 3 hours of working time.
For joint heads Ø 28 – 35mm.
Works with 1/2” ratchets or 27 mm sockets.