Showing 817–840 of 981 results

Spanner Set; Aviation Type with Multispline Profile

118.07 Ex. VAT
Sizes: 8x9, 10x11, 12x13, 14x15, 16x17, 18x19mm. The special multilock profile allows these spanners to be used on: square, hex, 30% rounded, torx, bi-hex and spline profile. The longer length allows more leverage.

Spanner Set; Aviation Type, Double Ring, 8-24mm

94.44 Ex. VAT
Sizes: 8x10, 11x13, 14x15, 16x17, 18x19, 22x24mm. Straight type, 0 degree offset. The longer length allows for more leverage giving increased torque.

Spanner Set; Aviation Type, Double Ring, 8-24mm (Master Set)

94.44 Ex. VAT
Sizes: 8x9, 10x12, 11x13, 14x15, 16x17, 18x19, 21x23, 22x24mm. Aviation double ring type.

Spanners for Poly-V-Belts

94.44 Ex. VAT
45 degree offset ends to reach awkward areas in the engine bay. For use on the idler belt. Profile: 12pt. Sizes: 13, 15, 16, 17, 19 mm. Length: 460mm.

Special Exhaust Clamp Plier For PSA

47.19 Ex. VAT
Ideal for expanding of exhaust clamps when changing the exhaust pipe. Suitable for: Citroen, Peugeot, Renaultand the majority of vehicles. 4 locking positions forgreater use of use and wider compatibility. Opening width 20-60mm.

Specialist Automotive Sockets 10-Piece

82.63 Ex. VAT
10S, 6pt., for Toyota idle wheel centre screw. 6S, 6pt., for Nissan & Renault clutch. 8S, 6pt., for Nissan cylinder head & balance shaft. 12S, 6pt., for Nissan cylinder head. 8TS, 3pt., for Nissan balance shaft. 10 mm, 5pt., for brake systems. 12 mm, 5pt., for Nissan fuel pump. 14 mm, 5pt., for GM & Smart Car. 19 mm, 5pt., for Peugeot, Renault & Citroen parking brake. 20 mm, 10pt., for Honda Civic lower control arm. Length: 38mm.

Steering Wheel Level

45.01 Ex. VAT
A must-have for quick and precisely even steering wheel assembly. Avoid reassembly of leant steering wheels that are only recognized after test drive. Much more accurate than the mechanics eyes alone.

Steering Wrack End Remover Tool 22-55mm

60.13 Ex. VAT
For fast and professional changing of the axial joints of cars and light commercial vehicles. Automatic clamping of the joint heads. Can be used without removing the rack and pinion. Saves up to 3 hours of working time for joint heads Ø 22 - 55mm. Works with 1/2'' ratchets.

Stretch Belt Fitting Tool Dual Size Pulleys

79.92 Ex. VAT
For use on duel size pulleys particularly with the Ford Focus. This kit has been designed especially for installing and dismantling stretch belts on double pulleys. Save huge amounts of time by installing in one action.

Strut Mate™ Jack-Mounted Strut Supporter

168.69 Ex. VAT
Provides a highly efficient solution for supporting and holding the strut in place while working on the vehicle. To be used in conjunction with a transmission jack.

Suction & Filling Car Fluid Syringe

59.01 Ex. VAT
1.5Ltr Capacity. Can be used on oil, brake fluid, transmission fluid, water and other fluids found in vehicles. Not suitable for fuel. Reduces spillage and mess.

Suction & Filling Syringe For Diesel Fuel Systems Incl 3-pc Adaptor Set

94.44 Ex. VAT
Designed to be used on both diesel and petrol engines when extracting excess fuel from fuel lines before maintenance. Comes with 3-piece quick connectors Universal Use. Replacement seals 1200-1-WW. Reduces damage and spillage. 1.5 Litre Capacity.

Suspension Screw Extractor for VAG; 4-link Suspensions

35.38 Ex. VAT
Special tool to remove the clamping screws on four wishbone front axles. Applications: Audi, SEAT, Skoda, VW. To be used with a air hammer. 10mm round shank. Can be used with 1070-WW vibro gun.

Swivel Base For Transmission Jack

118.07 Ex. VAT
Standard European transmission jack fitting on base. Adjustable chain length for universal application.

Swivel Head Oil Filter Plier

41.29 Ex. VAT
Specially designed jaws that swivel 180 degrees allows this tool to access oil and fuel filters in awkward and hard to reach areas. Jaw swivel: 180 degrees. Jaw range: 57 to 120mm. Long reach style.

Syringe for Fluid and Oil; 200ml

35.38 Ex. VAT
Suitable for oil, brake fluid, water, screen wash, and many other fluids. Not suitable for fuel. 200mm capacity.

Tap Socket Set; 8-Piece

59.01 Ex. VAT
Ideal for restricted access situations where you can't use a T-handle tap holder. These tap sockets allow for a much easier Job whilst cutting, chasing & cleaning threads. Magnetic Base allows ensures a secure hold to the taps. Can be used with a 1/4''dr or 3/8''dr Hand Ratchet. Supplied on a socket rail. Sizes: 1/4''dr sockets: 1mm, 2mm, 3mm, 4mm. 3/8''dr sockets: 5mm, 6mm, 7mm, 8mm.

Tie Rod Remover; Inner, Universal 27-42mm

47.19 Ex. VAT
For removing the inner tie rod without dismantling the rack and pinion. Universal applications with a range of 27 to 42mm. Should be used with a 1/2 drive ratchet.

Tie Rod Spanner 4-Link Suspension On VAG Models

67.83 Ex. VAT
For adjusting the toe-in quickly & precisely. This tool prevents the rubber connection from damage with its special bridged design. Cost and time effective. Applications: Audi A4 from `94, A6 from `00, A8 from `02, Seat Exeo from`10. Can also be used on many other VAG Group vehicles. The only tool that will fit perfectly to the tie-rod.