Showing 193–216 of 981 results

Ball Joint Splitter; 23x55mm

47.19 Ex. VAT
For shifting/pushing the ball joint out of axle legs, drop arms, stabiliser.

Ball Joint Splitters; 3-Piece

70.36 Ex. VAT
For shifting/pushing the ball joint out of axle legs, drop arms, stabiliser. Especially for working in narrow spaces. Suitable only for working on closed joints or joints with centre hole. Sizes: 23x55, 28x55, 34x63mm. Applications: Audi, BMW, Ford, Chrysler, Opel, SAAB, Volvo, VW, Nissan, Toyota.

Balljoint / Tie Rod Separator Set 5-Piece

47.19 Ex. VAT
Jaw opening approx. 17.4 - 23.8 - 28.5mm. Manufactured from forged carbon steel. 2 exchangeable handles - 1 for manual use and 1 for air hammer use/adaptor.

Balljoint Assembly Set; 21-Piece

206.66 Ex. VAT
heavy duty model with 152 mm pressure fork opening. the set includes all necessary bushes and pressure plates for. changing the ball joints on most US, European SUV cars and Transporter. 230 mm pressure spindle. pressure spindle arm. pressure bolt for pressure spindle 1/4'' and 3/4'' (long type). reception bushes 1-3/4 x 2“ / 2-1/4“x 2-1/2“ / 2-3/4“x 3“ reception bushes 2-1/4“ / 1-3/4“ / 1-7/16“ / 2-3/4“ und 2-1/4“ adaptor for reception bushes 2“ reception cup2“ / 2-5/8“ / 2“ / 1-1/4“ / 1-3/4“ assembly cup 1-3/4“.

Balljoint Splitter 8 Ton Hydraulic

235.67 Ex. VAT
Heavy duty design made to work every time. The benefit of using a hydraulic ram rather than a hammer or other form of impact is the gradual increase in pressure. Jaw opening: 55mm. Jaw width: 22mm. Jaw depth: 30mm. Spindle capacity: 8 ton. Working pressure: 40nm.

Bearing Install and Removal Tool Kit; Universal, 23pcs

106.26 Ex. VAT
Reduce the chance of damage to hub and bearing. Suitable for removing and installing large industrial bearing. Drift Sizes Ø: 55, 59, 63, 66.5, 70, 71.5, 73, 73.5, 75, 77.5, 81.5, 83.5, 88.5mm. Sleeve Ø External: 76, 86, 92, 101mm. Hub screw length: 210mm. Hub screw drive: 32, 38mm.

Bearing Mounting Press Set; 52pcs

164.79 Ex. VAT
Suitable for mounting of bearings, sealing rings and rubbers. Works well with WELZH 1070-WW. This kit includes mounting pads in following sizes: 18 to 65 mm (1 mm steps) and 74mm. 12 mm Ø bore. 180 mm metal handle for use with hammer.

Bearing Puller for Blind Hole Bearings; 5-Piece

117.54 Ex. VAT
Suitable for extracting bearings, bushings, sleeves, etc. Especially for removing out blind holes.Includes: 370 mm slide hammer, 1430 g. 4 spreading claws: 10-14, 15-19, 18-25 and 25-32mm.

Bearing Puller for Ford Transit Inner Front Wheel Bearings

88.59 Ex. VAT
Grips on the bearing taper and does not need to act as a wedge. Provides a safer, faster means of bearing removal without grinding. An engineered solution specifically designed for the Ford Transit with 3 legged puller design. Must be used in with 1133-WW. Welzh Master kit 60030-WW.

Bearing Race and Seal Driver; Universal, Adjustable

105.73 Ex. VAT
Durable and tough aluminium construction with rubberised striking tip.

Bearing Removal Tool for Ford Transit Custom Front Hubs

177.13 Ex. VAT
Front Bearing Tool For Ford Transit Custom Vans 2012- Onwards. For the GEN 3 Bearing on Transit Custom which have a built in drive flange. Enables the damage free removal of the front Wheel- bearing / Brake Disc assembly. With disc/bearing assembly removed the tool can be used to separate the disc and bearing.

Bearing Separator Kit; 14-Piece

82.63 Ex. VAT
Designed for easily removing bearings, internal rings and other tightly and narrowly mounted parts. Includes shifter and two splitter knives. Knife sizes: 30-50 mm and 50-75mm.

Bearing Separator Kit; 5pcs, 6.35 to 228.6mm

383.91 Ex. VAT
The Welzh bearing separator kit contains the most popular sizes needed for the automotive and workshop sector, also included is a pulley pulling attachment. Bearing separator 60.452mm maximum spread and 16.129mm minimum spread. Bearing separator 129.032mm maximum spread and 50.8mm minimum spread. Bearing separator 228.6mm maximum spread and 25.4mm minimum spread. Bearing separator 258.064mm maximum spread and 32.258mm minimum spread. Pulley pulling attachment with a 127mm maximum and 25.4mm minimum spread.

Bearing Tool Kit; Universal, 31-Piece

177.13 Ex. VAT
Universal use on most wheel bearings allows disassembly and assembly of the wheel hub and the wheel bearings. Includes pressure plates with diameter: 50, 55, 59, 63.3, 66.6, 70.3, 71.5, 73.1, 73.4, 74.8, 77.5mm.

Belt Tensioner Wrench, Ford Duratorq Engines

106.26 Ex. VAT
Designed for Ford Mondeo models with Duratorq 2.0, 2.2l TDDi/TDCi engines. Suitable for engines with D5BA, D6BA, HJBA, B, HJBC, FMBA, N7BA, QJBB and QJBA engine codes. OEM: 303 676.

Bit Master Set; Spline, Hex, Torx, Tamperproof Torx, 54-Pieces

59.01 Ex. VAT
Contents: Tamper Torx (30mm & 75mm Long): T20, 25, 30, 40, 45, 50, 55. Torx (30mm & 75mm Long): T20, 25, 30, 40, 45, 50, 55. Hex (30mm & 75mm Long): 4, 5, 6, 7, 8, 10, 12mm. Spline (30mm & 75mm Long): M5, 6, 8, 10, 12. Bit Holders: 1/2'' & 3/8''.

Bit Set; 1/2” and 3/8”; Hex, Torx and Spline; S2 Steel Range

76.78 Ex. VAT
Hex Bits (10x30mm): H5, H6, H7, H8. Hex Bits (10x75mm): H10, H12, H4, H5, H6, H7, H8. Spline Bits (10x30mm): M10, M12, M5, M6, M8. Spline Bits (10x75mm): M10, M12, M5, M6, M8. Torx Bits (10x30mm): T20, T25, T30, T40, T45, T50, T55. Torx Bits (10x75mm): T20, T25, T30, T40, T45, T50, T55.