Wheel Hub Resurfacing Kit
Sanding pads conveniently attach with half turn thread.
Can be used for domestic and import vehicles with either front or rear disc brakes.
Kit comes complete with a holder and five sanding discs.
Nylon, silicon carbide, resin adhesive.
Polishing disc size: OD 40mmxthicness 14mm xID 16mm.
Plastic tail socket size: 31.8mm.
Plastic tail socket thread M22.5, Bottom diameter 20.1x9mm.
Max operating speed 15000rpm.
Connecting seat length: 74mm.
Connecting rod size: 6mm, length: 29mm.
Wheel Stud Master Re-Threader Kit
Wiper Arm Puller
Wire Brush Assortment Set; 24-Piece
Wishbone Lever Bar
The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing.
After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support.
Sliding adjustment for easy positioning.
Material:Â CR-MO steel with steel tube.
Adjustable canter lever hook.
Comfortable rubber grip.
Single person operation.
Total length: 1180mm.
Maximum leverage.
Wishbone Lever; Universal
This tool is used to pull the lower suspension arms down and into place while the hub is being removed, making the job easier and more time effective.
Replace swivel joints, remove axle shafts and pull shock absorbers from the lower seat.
Pull down cross-linkers with ease, in order to access axles.
Easy to use an universal application thanks to adjustable chain length.
Allows totally hands free working environment when working on ball joints, wishbones etc. Usually this would require two people adding to expense and overall time.
Wishbone Off-Set Lever Bar Pat
Principle of operation:
The design of this tool allows you to push down on the wishbone and other suspension parts during the disassembly of the drive shaft when replacing the wheel bearing. In the majority of cases the wishbone must be pressed down onto the bush in order to pull the joint from the support. When using traditional methods the ball joint is prone to damage.
A safe working environment can be achieved when using this tool compared to traditional methods.
