Trim Tool Set; 11pcs
Truck Wheel Separator For Dual Wheels
Designed to remove dual steel wheels which have become seized together over time.
The special design of the tool clamps on to the outer rim of each wheel.
Can be used with pneumatic tools making the task much easier.
Huge time saver.
Suitable for use on a wide range of vehicles e.g. HGV's, buses, trailers, vans, motor-homes etc.
Turbo Actuator Adjustment Set – VAG
This tool set is designed for the professional loosening, adjustment and tightening of the control rod when removing/installing the pressure capsule along with the charge pressure actuator position sensor.
Suitable for the pressure capsule with charge pressure actuator position sensor at the exhaust gas turbocharger fitted to 2.0 l Common Rail Diesel engines.
For example found in: Golf VI (5K), Golf Plus (52), Jetta (1K), Passat (3C), Passat CC (35), Scirocco (13), Eos (1F), Tiguan (5N), Transporter T5 (from 2010 upwards, 7J, 7H, 7G, 7F) and Audi A3 (8P).
Turbo Housing Bolt; For Renault, Master, Traffic, Opel Movano, Nissan Primastar
Specially designed socket for removing the turbo housing on a wide range of common vehicles.
Also can be used for removing the bonnet bolts with the same profile fitted to the same vehicles.
For use on Renault Master, Traffic, Opel Movan, Nissan Primastar, and more.
Sizes: Crenellated in 8 Degrees, 1/4''dr 14.6mm x 50mm.
8-Point profile.
Twist Socket Set; 1/4”dr Long Reach
Tyre Lever with Polymer Protector; 535mm
Effective tool for mounting and dismounting tyres on aluminium and steel wheels.
The polymer protector prevents damage to the rim when used correctly.
Sliding protector is designed to be slide up the lever to protect the wheel rim.
Super tool for use on Run flat and low profile tyres.
Length: 535mm.
U-Hook
UFI Fuel Filter Cover Installation Lever
The unique feature of this tool is to allow re-assembly of the filter housing without bending or damaging the gasket face when removing the filter.
Not using this tool can lead to further more costly problems if the filter isdamaged while being replaced.
Most commonly found on VAG Group vehicles with 2.0l TDI common rail engines.
The huge savings in cost can allow this tool to pay for it's self in just one use.
Universal Brake Adaptor
Brake refilling adapter with a 90? rotating coupling for convenient use in confined spaces.
Fits Master Cylinders with a wide range of neck diameters using just one tool.
Fits almost all vehicle makes and models on the market.
Cylinder Neck Ø: 28-70mm (1.10''-2.75'').
Max Pressure: Up to 3.5 bar (50psi).
Can be used with part numbers: 1182-ww, 4182-ww and 4083-ww.
Universal Clutch Aligning Kit (17-Piece)
Universal Deburring Tool
The handy universal deburring set with 4 multi-purpose blades to help you produce a perfect finish for a wide variety of jobs.
This innovative blade holder has 4 folding shafts which can be easily locked in position for the duration of usage then folded back into the holder allowing the tool to be carried and stored.
Works well on a wide range of materials including steel, aluminium, and plastics.
Universal Diesel Priming & Bleeding Kit
Universal Flaring Tool
For flaring thin-walled steel, aluminium and copper pipes.
Suitable for pipe diameters: 4.75 mm (3/16'') and 6:00 mm (1/4'').
Can be used in a bench vise.
Solid construction.
Includes:
Basic unit with spindle and handle.
4.75 mm flare tool (concave convex).
6:00 mm flare tool (concave convex).
4.75 mm clamping jaw.
6:00 mm clamping jaw.
Cylindrical / flat flare tool.
Universal Glow Plug Extraction Master Kit
With the top of the glow plug damaged i.e. snapped off getting the glow plug can be a very awkward and expensive task. This kit has been developed to save huge amounts of effort and costs during this common task and is a must-have innovative kit for any mechanic.
Complete kit for glow plugs electrode extraction: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25.
Includes all the necessary tools: (9 x extraction rods, 4 x glow plug guides and 1 x slide hammer) for safely removing the terminal part of the glow plug electrode without damaging the cylinder head.
Universal Hydraulic Flaring Tool Set
Comprehensive hydraulic flaring kit for suitable for use on GM fuel lines, brake lines, transmission.
lines and air conditioning lines.
Hand held hydraulic pump allows for easy use.
Sizes:
45° Double Flaring: 3/16'', 1/4'', 5/16'', 3/8'', 1/2''.
Metric Bubble Flaring: 4.75, 6, 8, 10mm.
Push-Connect Forming 1/4'', 5/16'', 3/8''.
GM Fuel Line Forming: 5/16'', 3/8''.
Universal Press & Pull Sleeve Set
This Universal tool is designed for removing and installation of silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.
The tool set is ideal for different vehicles such as car, SUV, van and can be used with spindle and hydraulic-workshop-press.
Spindles classed as consumables, replacements available in kits and separately.
20 Pressure Sleeves with control cut-out:
Inside diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72mm.
Outside diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82mm.
Ball Bearing Spindles: M10, 12, 14, 16.
Universal Press & Pull Sleeve Set Extra Small
Specially Designed Universal Press and Pull Sleeve tool is designed for removal and installation of silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.
Extra low profile Cups allow for use in other wise restricted areas.
The Spindles are shortened to utilise the new Extra Low profile Design.
The tool set is ideal for different vehicle classes such as cars, SUV, van and can be used with spindle and hydraulic-workshop-presses.
Height: 30mm.
Diameters 34-82mm.
Material: S45C Cr-Mo.
Universal Press & Pull Sleeve Set For Commercial Use
Applications: Silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.
This kit is ideal for different commercial vehicles such as LGVS, HGVS, Tractors etc. and can be used with spindle and hydraulic-workshop-press.
Slotted sleeves allows an easy view of the bearing or bush etc.
Particularly useful for HGV due to the much larger sizes.
Sizing of cup inside: 74, 76, 78, 80, 82, 84, 86, 88, 90, 92, 94, 96, 98, 100, 102, 104, 106, 108, 110, 112mm.
Outside: 84, 86, 88, 90, 92, 94, 96, 98, 100, 102, 104, 106, 108, 110, 112, 114, 116, 118, 120, 122mm.
Inner Sleeve Sizes: 74-112mm (2mm steps).
Outer Sleeve Sizes: 84-122mm (2mm steps).
Spindle sizes: M10, 12, 14, 16, 18.
Universal Press Support Frame
Can be used as a standalone kit but with added Welzh adapter kits more specialist applications can be completed.
The benefit for any garage or workshop is the ability to have one frame and add the adapters you need.
Includes:
2 sets of legs, allowing for a wider range of applications.
2 adapter rings for use with press and pull and ball joint kits.
Allan key for the interchangeable legs.
Vibro-Spindle.
Universal Press Support Stacks
Set of 3 specially innovated Press Block Stacks.
Designed to provide an efficient and effective quick solution to assist in the pressing & removal of wheel bearings & housings; working in conjunction with the Hydraulic Press.
The unlevel design of wheel bearing housings/arms makes it extremely difficult in pressing new bearings in. Pressing them in level is almost impossible. The WELZH innovative design with precision cut outs allows for superior pressing in almost all wheel bearings housing from all manufacturers.
