Flexi Head Fuel & Filter Plier (commercial use)
Flexi Jaw Coilspring Compressor
Flexible Hose Clamp Plier
Flexible Hose Clamp Plier Clip Type
Flexible Magnetic Inspection Mirror Tool
Flexible Magnetic Pick Up Tool
Flexible Socket For Suspension Bolts On VAG Group
Specialist tool designed to be used when removing the top of Macpherson strut mounts. Which are commonly found on Audi, SEAT, Skoda and VW vehicles.
The fixtures are found in a confined area which makes access awkward via traditional methods. Although in a confined area the nuts a prone to corrosion and damage which means replacement and servicing is often needed.
Our product has been uniquely designed to access the strut mount with minimal effort due to the flexible design.
The factory OEM nuts can either be 6 or 8 point, due to the dual sided socket 4130-WW can accommodate both.
3/8'' drive - should be used with an extension bar (80 mm).
13mm socket.
Flexible Socket For Suspension Mount Bolts On VAG Group 14mm
Specialist tool designed to be used when removing the top of Macpherson strut mounts. Which are commonly found on Audi, SEAT, Skoda and VW vehicles.
The fixtures are found in a confined area which makes access awkward via traditional methods. Although in a confined area the nuts a prone to corrosion and damage which means replacement and servicing is often needed.
Our product has been uniquely designed to access the strut mount with minimal effort due to the flexible design.
The factory OEM nuts can either be 6 or 8 point, due to the dual sided socket 4130-WW can accommodate both.
3/8'' drive - should be used with an extension bar (80 mm).
14mm socket.
Fluid Extractor Manual & Air Operational 10-Litres
Fluid Extractor Manual 6-Litres
Fluid Mate™, Multi-Fluid Syringe
Multi Purpose Syringe.
Special design to allow the extraction of all types of Vehicle fluids, Engine Oil, Transmission Oil, Petrol, Diesel, Add Blue & Many More.
Fluid mate comes complete with a special adaptor set for connection to fuel lines.
Also comes with different head connector to easily identify for oil or Fuel etc.
Supplied with viton seals.
1.5-Litre Capacity.
Fluid Transfer / Extractor Pump Set
Fluid Transfer / Extractor Pump Set
This 3-in-1 tool can be used for Automatic Transmission Fluids, Brake Bleeding (with adaptors), and Oil Dispensing.
This helpful tool with pressurized operation frees the operator from constant pumping.
Includes adapters to fit many Ford, BMW, Honda, Nissan & VW, Porsche, Mini Cooper, Audi & Mercedes transmissions capacity.
Flywheel Front Pulley Locking Tool Set – Renault & Nissan
Flywheel and front pulley locking tool set for Renault.
Nissan chain driven petrol engines: 1.4/1.6/2.0/2.5/3.5.
Applications: Renault twin cam, chain driven petrol engines also fitted to Nissan.
Engine Codes: H4JT (1.4), M5M (1.6), MR4 (2.0), 2TR (2.5), V4Y (3.5).
Equivalent to OEM MOT 919-02, MOT 1431, MOT 1716, MOT 2019, MOT 1789.
Can also be used for M9R (2.0 diesel) to be used in conjunction with 2110-WELZH.
Ford Focus & Mazda 3 Trailing Arm Bush Removal / Installer Set
This kit can also be used with Art. 4148, 12 ton hydraulic ram.
Designed to be used in situ with vehicle offering the most efficient method of completing the task.
Make Model Applications.
Ford Focus Mk I (98-07) Remove/Install.
Ford Focus Mk II (98-07) Remove/Install.
Ford Kuga (before 08) Remove/Install.
Ford C Max MPV ((07) Remove/Install.
Mazda 3 (Chassis BK 03-09) Remove/Install.
Mazda 5 (Chassis CR, CW) Remove/Install.
Volvo V50 Estate (04-12) Remove/Install.
Volvo S40 Mk II (03-12) Remove/Install.
Ford Transit Lower Arm Bush Tool For Use With 67306-WW
For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013.
Can also be used in a workshop press for lower arms when they have been removed from the vehicle.
Designed to be used with Welzh 67306-WW press frame and Hydraulic Ram 4148-WW.
On vehicle solution with minimal strip down.
OEM Bush Numbers covered: 4042024, 4372132, 4540787 & 737213.
Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013.
Fuel Filter Removal Tool For VW Crafter & Volvos
Due to the awkward and hard to reach location of the fuel filter traditional methods are ineffectiveand this can potentially damage the filter housing which can be expensive to replace.
This tool quickly removes the filter while preventing damage to it and surrounding parts.
To be used with a 1/2'' dr Hand Ratchet.
Applications:
Volvo 4 and 5 cylinder 2.0lt and 2.4lt diesel engines, V70, XC70, S40, S60, S80, XC90, V50.
Volkswagen Crafter 2.5 TDi from 2006 to 2013.
Engine Codes:
AUH, BCQ, BJJ, BJK, BJL, BJM, CEBA, CEBB, CECA, CECB.
OEM Codes:
OEM T50011 & 999 7084.
OEM filter number 2E0 127 159.
Fuel Filter Removal Tools for Ford Transit (Custom)
Fuel Filter Removal Tools for Mercedes Benz 2.2 CDI
Due to the awkward and hard to reach location of the fuel filter traditional methods are ineffectiveand this can potentially damage the filter housing which can be expensive to replace.
This tool quickly removes the filter while preventing damage to it and surrounding parts.
Suitable for use on Mercedes Models with 2.2CDI Engines.
To be used with a 1/2'' dr Hand Ratchet.
Fuel Filter Removal Tools for PSA Group 2.2 HDi Engines
Due to the awkward and hard to reach location of the fuel filter traditional methods are ineffectiveand this can potentially damage the filter housing which can be expensive to replace.
This tool quickly removes the filter while preventing damage to it and surrounding parts.
Suitable for use on all PSA Vehicle fitted with 2.2Hdi Engines.
To be used with a 1/2'' dr Hand Ratchet.
Fuel Gauge & Pump Sender Collar Wrench
Fuel Line Pliers; Flexible Head
Fuel Pump Sprocket Holding Kit-for Vauxhall 1.6 CDTI
Pump Sprocket Holding Kit Helps to hold the pump sprocket in place stopping the drive chain dropping into the engine causing damage and rebuild.
Kit includes slide hammer to extract the sprocket.
New sprocket blanking will be required - OEM part number 5557422.
Applications: Vauxhall Astra (2013 - 2018), GTC (2015 - 2018), Insignia (2015 - 2018), Meriva (2013 - 2017), Mokka (2014 - 2018), Zafira (2013 - 2018).
Engine Applications: 1.6 CDTI diesel, LVK/B16DTR, LVL/B16DTH, LWQ/B16DTC, LWQ/B16DTE, LWV/B16DTU.
Equivalent to OEM EN-50885 Includes slide hammer to extract the sprocket blanking plate. New sprocket blanking plate will be required - OEM part number 5557422
Fuel Return Line Tool For VAG Group
Specially designed for the removal and installation of new style injector fuel return clips which is installed on return pipes used on VAG Group Piezo injectors. To remove the clips they must be unlocked before removal or they are prone to damage. This tool unlocks and removes them with ease.
Applications: Audi A3 (2008-'10), A4 (2005-'12), A5 (2009-'12), A6 (2004-'15), A7 (2012-'15), Q5 (2009-'16), Q7 (2007-'09), Volkswagen Passat (2008-'12), Phaeton (2004-'07), Scirocco (2008-'11), Tiguan (2007-'11), Transporter T5 (2009-'15), Eos (2008-'10), Golf VI Estate (2008-'10), Jetta (2009-'11), SEAT Exeo (2009-'12), Skoda Yeti (2009).
Engines Codes: 2.0 (CBAA, CBAB, CAGA, CAGB, CAGC, CBDB, CBAC, CBDC, CAAA, CAAB, CAAC, CAAD, CAAE). 2.7 (BPP). 3.0 (CDUD, BMK). 4.2 (BTR).
