Needle Scaler Composite
Nox Sensor Tap Kit M20X1.5 & M22X1.5
Damage Free Restoration
The removal of the NOX sensor usually causes damage to the threads as a normal tap is too long, and it might be placed at an angle that provides the new sensor with an incorrect mounting position within the exhaust. The damage can also be caused by the high variation in temperature and carbonization.
The WELZH kit allows for damage free restoration of the NOX sensor hole thread, with the alignment guides ensuring it is at the correct angle.
Extra Short
Can be used with a socket or ratchet for hard to reach areas.
Time and Money Saver
No need for a new exhaust system.
Universal
For diesel particulate filter, any exhaust sensors, and those in a catalytic convertor.
Oetiker Collar Pliers
Oil Filter Chain *Professional Use* 60-115mm
Oil Filter Chain Wrench 60-160mm
Oil Filter Wrench DSG/VAG
Oil Filter Wrench DSG/VAG – Stubby Version
Oil Filter Wrench For 27mm
Oil Filter Wrench Kit; 30-Piece Set
3 leg oil fi lter wrench Ø 65 mm - Ø 120mm.
Adaptor 10 mm (3/8'') x 12.5 mm (1/2'').
65 mm x 14-pt: for Daihatsu, Toyota, Nissan, Fiat.
65 / 67 mm x 14-pt: for Daihatsu, Toyota.
66 mm x 6-pt: for Fiat Punto 1.2, Renault.
68 mm x 14-pt: for Mazda, Ford Escort, Subaru.
73 mm x 14-pt: for Toyota, Lexus.
74 mm x 15-pt: for Audi, GM, Rover, Chrysler.
74 / 76 mm x 15-pt: for Ford, Opel, VW, Audi, Mercedes.
75 / 77 mm x 15-pt: for VW, Audi, Ford, Isuzu, Mercedes, Opel.
76 mm x 8-pt: for Fiat Marea, Lancia Delta.
76 mm x 12-pt: for Fiat, Renault, Mercedes.
76 mm x 14-pt: for VW, Mercedes, Porsche, BMW, Audi, Opel.
76 mm x 30-pt: for Ford, Motorcraft FL400A.
78 mm x 15-pt: for Nissan, Ford, Toyota.
80 mm x 15-pt: for Nissan, Honda, Opel, Mazda.
80 / 82 mm x 15-pt: for Subaru, Toyota, Honda, Mazda, Nissan.
86 mm x 16-pt: for Volvo S40 / S60 / S70 /S80.
86 mm x 18-pt: for VW, Audi, Renault, Peugeot, Citroen.
90 mm x 15-pt: for Subaru, Toyota, Honda, Mazda, Nissan.
92 mm x 10-pt: for Fiat, Lancia.
93 mm x 15-pt: for Mazda, Volvo, Mitsubishi, Nissan, Honda.
93 mm x 36-pt: for Ford, Motorcraft FLINFLA 1B, FL3001, FL320.
93 mm x 45-pt: for VW, Audi.
95 mm x 15-pt: for Toyota, Alfa, GM, Ford, Chrysler.
96 mm x 18-pt: for VW, Renault.
100 mm x 15-pt: for Isuzu, Mitsubishi.
106 mm x 15-pt: for Fiat Ducato 2.5D.
108 mm x 15-pt: for Volvo Diesel C70 / S70 / N70 / 850 Tdi.
108 mm x 18-pt: for Renault Espace / Laguna / Master /.
Safrane / Traffic 2.4 2.5 2.8D Tdi.
Oil Filter Wrench Set; 19-Piece Generation 2
For use on new generation oil filters.
Effective damage free removal of a variety of oil filters.
Traditional methods can be costly because of damage to the filter.
24mm - BMW, Vauxhall, Dodge, Jeep, Chrysler.
27mm - Mercedes, Smart.
30mm - Audi, VW.
32.5mm - Vauxhall, Mercedes.
36mm - Vauxhall, BMW, Mini, Mercedes, VW, Ford.
38mm - Vauxhall.
63-64mm - Lexus, Subaru, Mazda, Lexus, Toyota.
64.5mm - Toyota.
64.5mm - Toyota.
66.6mm - Mazda, Ford, Honda.
74mm - VAG, BMW, PSA, Ford, Mercedes, Renault, Toyota, Vauxhall, Mazda.
79mm - Honda, Nissan, Isuzu, Mazda.
92mm - Alfa Romeo, Chrysler, VAG, Ford, Mitsubishi, Vauxhall, Renault.
94.5mm - Ford (Vans), Nissan.
100.5mm - Honda, Mitsubishi, Mazda.
Oil Filter Wrench Set; 3rd Generation
Oil Filter Wrench Set; 9-Piece
For oil filters and filter crank case.
Assortment for removal and reassembly of the oil filter and changing the filter housing.
All filters are with 3/8'' drive for Exact torque suit.
Universal use On: VAG, Opel, Renault, Toyota, PSA, Renault, Mercedes, Volvo, Ford etc.
Includes the following oil filter cap wrenches:
64.5 mm x 14-pt., aluminium chrome finish, for Toyota Auris, Corolla, Premio, Prius.
64.5 mm x 14-pt., aluminium chrome finish, for Toyota V6 Modelle von 2007-2008, Lexus ES 350, GS 350, GS 350h, LS 460, RX 350, LS 600j L.
88.8 mm x 15-pt, aluminium chrome finish, for Kia and Hyundai.
74.2 mm x 14-pt., aluminium chrome finish, for Audi, BMW, Ford, Mazda, Toyota, Volkswagen, Porsche, Mercedes V6 / V8.
86.6 mm x 16-pt., aluminium chrome finish, for BMW 335i, 535i, 3 series E90, X6 3.0L, Volvo Modelle 1999-2006 (not 2005 40 and 50 models).
63 - 83 mm Universal oil filter cap wrench, SCM 440 chrome finish.
27 mm x 6-pt., S45C nickel, for Mercedes and Smart models.
32 mm x 6-pt., S45C nickel, for Opel 4-cyl. 2.2 L X10XE, X12XE, Y17DT, Y17DT, and Mercedes OM 364, OM 366.
36 mm x 6-pt, S45C nickel, for Mercedes Diesel OM604, OM605, OM606, BMW M52, M60, M70, Mini, VW VR6.
Oil Filter Wrench; Universal, 60-80mm
Oil Filter Wrench;75×15, Ford 1.5/1.6 EcoBoost
Oil Measuring Jug Set; 5 Litres 4-Pack
Oil Pressure Test Kit
Opel / Vauxhall Engine Timing Tool Set
Kit includes tools to lock the camshaft and the crankshaft.
Applications:
Opel Z 19 DT / Z 19 DTH: Vectra C and Signum '04.
Opel Z13 DT: Corsa and Combo '04.
Opel with Z 22 SE: Astra G, Vectra C, Zafira, Signum and Speedster Vx220, '00 - '04.
Opel 1.0l - 12V, 1.2l and 1.4l 16V: Corsa, Agila, Astra and Meriva.
Opel 2.0l and 2.2l Ecotec: Astra, Astra, Caravan, Zafira, Vectra, Omega, Sintra and Frontera.
Engine Codes: OHC, DOHC, Z13, Z22, X10XE, Z10XE, Z10XEP, X12XE, Z12XE, Z14XEP, X20DTL, X20DTH, X22DTH.
Also suitable for Renault and Saab vehicles with the same engine.
Opel/ Vauxhall 26-piece timing tool set
To be used for locking the camshaft and crankshaft, removal and assembly of injection and water pumps and changing the timing belt.
Can be used on Vauxhall and MG vehicles with 1.3 CDTi 16V, 1.9 CDTi, 2.0 DTi and 2.2 Dti diesel engines.
Vauxhall. With 1.0L-12V, 1.2L and. 4L 16V Petrol Engines (X10XE, Z10XE, Z10XEP, X12XE, Z12XE, Z14XEP) e.g. Corsa, Agila, Astra and Meriva.
Vauxhall 2.0L and 2.2L Ecotec Diesel-Engines (X20DTL, X20DTH, X22DTH) e.g. Astra, Astra, Caravan Zafira Vectra Omega, Sintra and Frontera. Vauxhall Z19 DT/Z 19 DTH Engine e.g. Vectra C, Signum, 04.
Vauxhall Z13 DT Engines e.g. Corsa and Combo, 04.
Vauxhall Z22 SE Engine e.g. Astra G Vectra C.
Zafira, Signum, Speedster Vx220, 00- 04.
Oxygen Sensor Thread Repair Set
For the repair of broken oxygen sensor threads.
No need to replace exhaust pipes.
Included
Reamer Ø 18.6 mm for reaming of oxygen sensor threads.
Tap M20 x 1.5 for cutting the repair bushing threads.
Tap M18 x 1.5 for cutting of oxygen sensor threads.
Insertion tool to insert the threaded bushings.
5 repair bushings.
