Shop - German Specialist Tools

Add to basket

Petrol Engine Compression Tester

€59.01 Ex. VAT

This compression tester can be quickly set to your bike / car, then you can get accurate readings in valves, piston rings, cylinder bores or head gaskets. Manometer with double graduation ( 0 to 300 psi, 0- 21 kg / cm 2 ) and with rubber protection to prevent scratches. Drain valve with full copper nickel plating, anti -oxidation and corrosion. 4 Adapters: M10x1.0mm, M12x1.25mm, M14x1.25mm, M18X1.5mm. M12, M14, M18 adapters are suitable for car. M10 adapter is suitable for motorcycles. Pressure gauge with rubber protection. Angled pressure tube length: 160mm. Pressure gauge Diameter: 75mm. Test pressure: max 21 bar / 300 psi. Pressure tube length: 150mm. Hose Overall length: 430mm. Case Size: 265 x 210 x 65mm.

Add to basket

Petrol Engine Setting-Locking Tool Set For Fiat, Ford, Lancia 1.2-1.4, 8v- Belt Drive

€94.44 Ex. VAT

For setting and adjusting the timing on Ford 1.2, 1.4L 8v engines. Applications: Fiat: 500 (07-12), Doblo/Cargo (05-10), Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2, Punto EVO (09-12). Lancia: Ypsilon (06-11), Musa (05-12). Ford: Ka (09-12). Engine Applications: Fiat: 1.2/1.2 Dualogic, 169A4.000, 188A4.000 (EVO2), 199A4.000, 1.4/1.4 Bi-Fuel LPG / 1.4 Natural Power CNG, 199A7.000, 350A1.000. Lancia: 1.4/1.4 Bi-Fuel LPG, 350A1.000. Ford: 1.2 Duratec, 169A4.000 (FP4). OEM Tools. Crankshaft Locking Tool: OEM 2.000.004.500 on Fiat/Lancia - OEM 303-1480 on Ford. Camshaft Setting Tool to be used as OEM 2.000.004.400 on Fiat/Lancia and OEM 303-1479 on Ford. Camshaft Sprocket Locking Tool to be used as OEM 2.000.004.200 on Fiat/Lancia and OEM 303-1477 on Ford. Camshaft Cover Aligner to be used as OEM 2.000.004.300 on Fiat/Lancia and OEM 303-1478 on Ford. Tensioner Adjuster to be used as OEM 1.860.987.000 on Fiat/Lancia.

Add to basket

Petrol Engine Setting/Locking Kit Alfa Romeo Fiat Lancia 1.2 16v, 1.4 16v 1.4 T Jet – Belt

€118.07 Ex. VAT

For adjusting the engine timing during timing belt replacement, cylinder head repair, replacement of the cylinder head gasket, etc. Suitable for Alfa Romeo, Fiat and Lancia 1.2 16V / 1.4 16v / 1.4 T-Jet. Engine Codes:Ã‚Â 169A3000, 179B9000, 182B2000, 188A5000, 192B2000, 198A1000, 198A4000, 199A6000, 199A8000, 843A1000. Includes the following tools: Crankshaft locking tool with screws M6x30 and 3 pcs M8x16 to be used as OEM 2.000.004.500. Camshaft adjusting tool (1 pair) to be used as OEM 1.860.985.000. Adjusting tool for piston height to be used as OEM 1.860.992.000. Adjusting tool for timing belt tensioner to be used as OEM 1.860.987.000. Locking tool for camshaft sprockets (with screw M8x30) to be used as OEM 2.000.015.800. To be used as OEM: 2000004500, 1860985000, 1860992000, 1860987000, 2000015800.

Add to basket

Petrol Engine Timing Kit For BMW, Mini, Citroen, Peugeot Chain Driven

€94.44 Ex. VAT

Designed for setting and adjusting the timing on BMW and PSA models. OEM tools included:Ã‚Â 11.3.340, 11.4.360, 11.5.140, 11.9.280, 11.9.330.Applications: BMW 1 Series: 116i E81/82/87/88 (04-09), 118i E81/82/87/88 (04-14), 120i E81/82/87/88 (04-14), 125i E82 (07-12), 130i E81/87 (05-12), 135iS E82 (07-12). BMW 3 Series: 316i/ti Compact E46 (01-07), 316i E90/91/92/93 (05-14), 318i/ti Compact E46 (01-07), 318i E90/91/92/93 (05-12), 320i E90/91/92/93 (05-12), 323i E90/91/92/93 (04-11), 325i E90/91/92/93 (04-12), 330i E90/91/92/93 (04-14), 335i E90/91/92/93 (04-14). BMW 5 Series: 520i E60/61 (07-10), 523i E60/61 (04-10), 525i E60/61 (04-10), 530i E60/61 (05-10). BMW 6 Series: 630i E63/64 (04-11). BMW 7 Series: 730i E65/66 (04-12). BMW X Series: X1 sDrive 18i E84 (10-12), X1 xDrive 18i E84 (10-12), X3 2.0 E83 (05-10), X3 2.5/3.0 E83 (06-10), X5 3.0 E70 (06-10). BMW Z Series: Z4 2.0 E85/86 (04-09), Z4 2.5/3.0 E85/86 (05-09). BMW Mini: Clubman (R55) (08-14), Cooper S R55/56 (06-10), Cooper R55/56 (06-10), Mini One R56 (07-10) Mini (R56/57) (08-15). Citroen: Berlingo (09-16), C3 Picasso (09-15), C3 III (10-15), C4 Picasso/Grand Picasso (08-13), (08-11), C4 (08-11), C4 II (11-15), C5 III (09-14), DS3 (04-15), DS4 (11-15), DS5 (12-15). Peugeot: 207 (06-13), 207CC (07-15), 208 (13-15), 2008 (13-15), 308 (07-15), 308CC (09-15), 3008 (09-15), 508 (11-15), 5008 (09-15), Partner III (09-16), RCZ (10-16). Engine Codes: BMW: N40; B16A, N42; B18A, B20A, N45T; B16AC, N46; B18, B20, B20B, N46T; B20, B20B, B20BD, B20BZ, B20O2, N52; B25A, B25AE, B30, B30A, B30A/O0, B30AF, B30F, B30U1, N52K; B25A, B25AE, B25AF, B25AF/O1, B25BE, B25U1, B30A, B30AE, B30AF, N53; B25A, B30A, N54; B30A, B30A/AA, B30T0. BMW Mini: N12; B14, B14AB, B16A, N14; B16A, B16CD, B16CD/T0. PSA: EP3 (8FP), EP3 (8FS), EP3C (8FN), EP3C (8FP), EP3C (8FR), EP6 (5FP), EP6 (5FW), EP6C (5FH), EP6C (5FK), EP6C (5FS), EP6C (5FW), EP6CDT (5FE), EP6CDT (5FM), EP6CDT (5FN), EP6CDT (5FV), EP6CDTE (5FR), EP6CDTM (5FE), EP6CDTM (5FM), EP6CDTX (5FU), EP6DT (5FT), EP6DT (5FX), EP6DTE (5FR), EP6DTE (5FX), EP6DTS (5FD), EP6DTS (5FF), EP6DTS (5FY).

Pick and Hook Set & Scraper; 9-Piece

€29.48 Ex. VAT

Easily gain access to tricky and awkward areas with a wide variety of different picks to suit a huge range of tasks. Includes: Small straight pick. Small full hook. Small 45° hook. Small 90° hook. Large 1'' scraper. Large straight pick. Large full hook. Large 45° hook. Large 90° hook.

Add to basket

Pick and Hook Set; 6-Piece

€22.39 Ex. VAT

Made from stainless steel. Straight tip with a 90° bent tip for O-rings. Hook tip/Combination tip. Length: 135mm.

Add to basket

Pick and Hook Set; Extra Long, 10-Piece

€41.29 Ex. VAT

Lengths: 4x 7.7cm & 6x 15.2cm. Includes: 2 x hook. 3 x small angle hook. 3 x 90° hook. 2 x straight picks. With 'O' rings.

Add to basket

Pick Set; Mini Type, 4-Piece

€23.57 Ex. VAT

Used for getting small parts from tight spaces. Including removal of O-rings & gaskets. Straight pick, hook angled 90°, round hook, angled hook.

Add to basket

Pin Punch Set; 6-Piece

€47.19 Ex. VAT

Hardened Steel. Length: 150mm. Sizes: 3, 4, 5, 6, 7, 8mm.

Add to basket

Pin Punch Set; Extra Long 6-Piece

€59.01 Ex. VAT

Hardened Steel. Length: 200mm. Sizes: 3, 4, 5, 6, 8, 10mm.

Add to basket

Pipe Deburring Tool For Use On, Copper | Brass | Steel | Plastics

€21.35 Ex. VAT

Suitable for pipe internal diameter of 3 to 12 mm and pipe outside diameter of 4 to 14mm. For outer and inner de-burring of metal pipes. Outside cutter made of HSS steel. Can also be used on plastics. Inner cutter retractable.

Add to basket

Plastic Clip Removal Plier

€47.19 Ex. VAT

Straight 2-Toothed Jaws to reach in wheel wells, under bumpers & behind the dash to remove retaining clips. Remove plastic body fasteners and clips faster in nearly any location - the specially designed jaw angle helps access hard-to-reach places while providing maximum leverage to remove clips quickly and without damage. The unique design lifts the centre pin and pulls the body clips without damaging anchors. Eliminating the need to provide replacement clips. Reusing these fasteners saves money and time searching for replacements of various shapes and sizes: Applications:Ã‚Â VAG Group, PAS, Renault, Fiat, Vauxhall-Opel, Ford-Volvo, Honda, Mitsubishi, Nissan-Infiniti, Mercedes, Chevrolet, Toyota, Lincoln, GMC-Cadillac, Chevrolet, Hyundai, Kia.

Add to basket

Plastic Clip Removal Plier 3-Jawed

€53.10 Ex. VAT

Straight 3-Toothed Jaws to reach in wheel wells, under bumpers and behind the dash to remove retaining clips. Remove plastic body fasteners and clips faster in nearly any location - the specially designed jaw angle helps access hard-to-reach places while providing maximum leverage to remove clips quickly and without damage. The unique design lifts the centre pin and pulls the body clips without damaging anchors. Eliminating the need to provide replacement clips. Reusing these fasteners saves money and time searching for replacements of various shapes and sizes: Applications:Ã‚Â VAG Group, PAS, Renault, Fiat, Vauxhall-Opel, Ford-Volvo, Honda, Mitsubishi, Nissan-Infiniti, Mercedes, Chevrolet, Toyota, Lincoln, GMC-Cadillac, Chevrolet, Hyundai, Kia.

Add to basket

Plastic Clip Removal Plier 90-Degree

€53.10 Ex. VAT

90Ã‚Â° Jaws to reach in wheel wells, under bumpers and behind the dash to remove retaining clips. Remove plastic body fasteners and clips faster in nearly any location - the specially designed jaw angle helps access hard-to-reach places while providing maximum leverage to remove clips quickly and without damage. The unique design lifts the centre pin and pulls the body clips without damaging anchors. Eliminating the need to provide replacement clips. Reusing these fasteners saves money and time searching for replacements of various shapes and sizes: Applications:Ã‚Â VAG Group, PAS, Renault, Fiat, Vauxhall-Opel, Ford-Volvo, Honda, Mitsubishi, Nissan-Infiniti, Mercedes, Chevrolet, Toyota, Lincoln, GMC-Cadillac, Chevrolet, Hyundai, Kia.

Add to basket

Plastic Door Trim Plier With Swivel Head

€53.10 Ex. VAT

Easy release mechanism. Will remove broken/unwanted trim clips. Made from hardened steel. Angle easily adjusted; 0-90Ã‚Â°.

Add to basket

Plastic Oil Drain Plug

€11.76 Ex. VAT

Designed for damage free removal of plastic sump plugs commonly found on VAG Group vehicles. The best solution for a damage free removal of sump plug. 1/4'' drive.

Add to basket

Plastic Welding Kit

€147.60 Ex. VAT

The high costs involved in replacing the plastic panels on vehicles can be. uneconomic when a quick repair using this kit could save huge costs and time. Applications: Flame Welding. Air Shrinking. Soldering. Brazing. Cutting.

Add to basket

Plier Mate

€35.38 Ex. VAT

Ideal for tidying away and storing pliers. Up to 15 spaces to store a range of pliers in different sizes and thickness. Made from a high quality polished steel for long lasting use and easy to clean. Can also fit into a variety of tool chests allowing for better organisation of tools during tasks.

Add to basket

Plier Set 3-Piece Set

€25.45 Ex. VAT

Manufactured from hardened and tempered drop forged Chrome Vanadium steel. Dual material comfort grip handles and black oxide finish for corrosion protection. Induction hardened 55-65 HRC for cutting hard and soft wires. Serrated jaws and precision ground cutting edges. Finely ground polished heads. Contents: Combination Plier 175mm. Side Cutter Plier 160mm. Long Nose Plier 200mm.

Add to basket

Plier Set 9-Piece Mini Plier Set

€70.82 Ex. VAT

ESP - Encapsulated Spring Pliers - spring loaded joint for superior ergonomics. Dual dipped, chemical resistant handles provide added comfort and grip. All jaws and cutting edges are heat-treated to provide performance and durability. Forged alloy steel with black oxide and surface grind finish. All pliers exceed ANSI and ASME standards.

Add to basket

Pliers For Locking Rings

€53.10 Ex. VAT

The special design of the plier Tips enable the easy removal and replacement of wheel bearing Circlips that are without eyelets. Professional and safe removal and replacement of the wheel bearing Circlip are almost impossible without this special tool. Suitable e.g. for wheel bearing clips on; Citroen, Renault, Peugeot, Nissan, Citroen Xara, Renault Clio, Nissan Micra etc.

Add to basket

Pliers; Long Nose, Double Joint, 3-Piece

€70.82 Ex. VAT

Due to the double joint, a large forceps mouth opening with small handle opening is possible. Especially suitable for working in confined areas. Packed in Plastic Storage Tray. Double dip-coated handles. Contents: Long nose pliers, straight, 340 mm long. Long nose pliers, slightly angled, 335 mm long. Flat nose pliers, straight, 340 mm long.

Add to basket