Specialist Automotive Sockets 10-Piece
10S, 6pt., for Toyota idle wheel centre screw.
6S, 6pt., for Nissan & Renault clutch.
8S, 6pt., for Nissan cylinder head & balance shaft.
12S, 6pt., for Nissan cylinder head.
8TS, 3pt., for Nissan balance shaft.
10 mm, 5pt., for brake systems.
12 mm, 5pt., for Nissan fuel pump.
14 mm, 5pt., for GM & Smart Car.
19 mm, 5pt., for Peugeot, Renault & Citroen parking brake.
20 mm, 10pt., for Honda Civic lower control arm.
Length: 38mm.
Spreader Socket Set for Spring Strut Clamp, 5 x 7mm and 5.5 x 8.2mm
Subframe Locating Pins For VAG Group
Primary Used on a variety of VA Model Vehicles Including Volkswagen Scirocco 09-. EOS (06), Golf (09), Golf Plus (05), Jetta (04-06), Polo (02), Fox (06), Passat (06), Passat CL (09) and Audi A3 (04), TT (07) and A4 (01).
On some vehicles in the Volkswagen Audi Group the sub-frame needs to be removed to service the suspension bushes, when removing the clutch, changing the engine, servicing the wheels, steering, stabilizer bar or control arms.
These pins are screwed into the sub-frame and used to guide it back into place once the task is complete. Care should be taken to bolt back diagonally and to the manufacturer's recommended torque.
Two sizes are available: The first an M12 can be fitted to Volkswagen Scirocco (09), EOS (06), Golf (09), Golf Plus (05), Jetta (4-06) Polo (02), Fox (06), Passat (06), Passat CL (09), Audi A3 (04), TT (07) and A4 (01) - OEM T10096 (Sub-frame Locating Pins - Volkswagen and Audi Group (Part No 4722)).
The second size an M14 is primarily used for the new Volkswagen Crafter - OEM T10227 (Part No 4840).
Thin Walled Lambda Sensor Socket 22mm – Ford
Torque Multiplier Set 1”dr
Torque Wrench ”Werkstad” 1”DR 200-1000Nm
Torque Wrench ”Werkstad” 1/2”DR 40-210Nm
Torque Wrench ”Werkstad” 1/2”DR 50-350Nm
Torque Wrench ”Werkstad” 3/4”DR 100-500Nm
Torque Wrench ”Werkstad” 3/4”DR 150-800Nm
Torque Wrench ”Werkstad” 3/8”DR 20-110Nm
Torque Wrench 1/2”dr 40-200NM Digital With Angle Settings
Professional workshop grade torque wrench suitable for daily use.
Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels.
Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited.
Space for up to 5 user presets.
Reversible with 72tooth ratchet.
Supplied with test certificate.
Torque: 40 - 200 Nm.
Length: 650mm.
Drive 1/2''.
Angle Range 0-360?.
Accuracy: /- 2%.
Resolution: 0.1Nm?(0.1lb-ft).
Preset: 10.
Memory (Torque): 100(10memory for each preset).
Memory (Angle): 50.
Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m).
Mode: Trace / Peak.
Indicators: LED?& Buzzer.
Battery 3pcs * AAA.
Auto shut off: 60seconds.
Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F).
Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F).
Operating relative humidity: 15-90% noncondensing.
Torque Wrench 1/2”dr 68-340NM Digital With Angle Settings
Professional workshop grade torque wrench suitable for daily use.
Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels.
Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited.
Space for up to 5 user presets.
Reversible with 72tooth ratchet.
Supplied with test certificate.
Torque: 68 - 340 Nm.
Length: 650mm.
Drive 1/2''.
Angle Range 0-360?.
Accuracy: /- 2%.
Resolution: 0.1Nm?(0.1lb-ft).
Preset: 10.
Memory (Torque): 100(10memory for each preset).
Memory (Angle): 50.
Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m).
Mode: Trace / Peak.
Indicators: LED?& Buzzer.
Battery 3pcs * AAA.
Auto shut off: 60seconds.
Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F).
Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F).
Operating relative humidity: 15-90% noncondensing.
Torque Wrench 3/8”dr 20-100NM Digital With Angle Settings
Professional workshop grade torque wrench suitable for daily use.
Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels.
Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited.
Space for up to 5 user presets.
Reversible with 72tooth ratchet.
Supplied with test certificate.
Torque: 20 - 100 Nm.
Length: 405mm.
Drive 3/8''.
Angle Range 0-360?.
Accuracy: /- 2%.
Resolution: 0.1Nm?(0.1lb-ft).
Preset: 10.
Memory (Torque): 100(10memory for each preset).
Memory (Angle): 50.
Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m).
Mode: Trace / Peak.
Indicators: LED?& Buzzer.
Battery 3pcs * AAA.
Auto shut off: 60seconds.
Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F).
Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F).
Operating relative humidity: 15-90% noncondensing.
Torque Wrench 3/8”dr 27-135NM Digital With Angle Settings
Professional workshop grade torque wrench suitable for daily use.
Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels.
Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited.
Space for up to 5 user presets.
Reversible with 72tooth ratchet.
Supplied with test certificate.
Torque: 27 - 135 Nm.
Length: 405mm.
Drive 3/8''.
Angle Range 0-360?.
Accuracy: /- 2%.
Resolution: 0.1Nm?(0.1lb-ft).
Preset: 10.
Memory (Torque): 100(10memory for each preset).
Memory (Angle): 50.
Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m).
Mode: Trace / Peak.
Indicators: LED?& Buzzer.
Battery 3pcs * AAA.
Auto shut off: 60seconds.
Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F).
Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F).
Operating relative humidity: 15-90% noncondensing.
Torsion Socket Set; 110nm, 17, 19, 21mm, 1/2”dr
Torsion sockets which allow torque of up to 80ft lbs (108Nm) when used with an air impact wrench.
Prevents the over tightening of wheel nuts.
Manufactured from Chrome Molybdenum.
Profile:Â 6-Point.
*Please note always use a Torque Wrench to check the torque*.
Sizes:
60076-17-WW 17mm.
60076-19-WW 19mm.
60076-21-WW 21mm.
Torx Bit Socket Set, Extra-Low Profile, S2 Steel, T10-T55
Twist Socket Set; 1/4”dr Long Reach
Twist Socket Set; Long, 17, 19, 21, 22mm, 1/2”
Twist Sockets; 3-Piece 1/2”dr Thin Wall Flip Sockets
The lug nuts become distorted due to improper leverage using the factory supplied tire iron. Removing over-torqued lug nuts during extreme cold/heat also distorts lug nut cap to non standard sizes.
Use these dedicated sockets every time you loosen the Locking Wheel nut and remove damaged/distorted lug nuts with their versatile size range ideal for worn and distorted nuts.
Dual flip 1/2'' drive impact socket design.
Product classed as Consumable.
Supplied in EPA Foam Tray.
Twist Sockets; 9-19mm, 3/8”dr
Twist Sockets; Extra Long, 17, 19, 21mm, 1/2”
Twist Sockets; Extra Long, 17, 19, 21mm, 1/2”
Universal Locking Wheel Nut Remover
Universal Locking Wheel Nut Remover; Master Kit
Universal Stud Extractor 6-12mm
Vibro-Force Spindle
Wobble Extension Bar Set 9-piece 1/4”, 3/8” & 1/2” Drive
9-Piece Wobble Extension Bar Set.
Deep knurling on shafts allows extra grip for oily fingers when spinning off fixings.
Supplied in storage tray.
Contents:
1/4''dr X 50mm(2'').
1/4''dr X 100mm(4'').
1/4''dr X 100mm(4'').
1/4''dr X 250mm(10'').
3/8''dr X 75mm(3'').
3/8''dr X 150mm(6'').
3/8''dr X 250mm(10'').
1/2''dr X 50mm(2'').
1/2''DR X 125mm(5'').
1/2''dr X 250mm(10'').
Wobble Extension Bar Set 9-piece 1/4”, 3/8” & 1/2” Drive Magnetic Version
Extended magnet on drive retains fixing in socket.
Deep knurling on shafts allows extra grip for oily fingers when spinning off fixings.
Supplied in storage tray.
Contents:
1/4''dr X 50mm(2'').
1/4''dr X 100mm(4'').
1/4''dr X 100mm(4'').
1/4''dr X 250mm(10'').
3/8''dr X 75mm(3'').
3/8''dr X 150mm(6'').
3/8''dr X 250mm(10'').
1/2''dr X 50mm(2'').
1/2''DR X 125mm(5'').
1/2''dr X 250mm(10'').
