Booster Pack; Mini Type, 12v
Applications:
Diesel engines: up to 3.0l.
Petrol engines: up to 6.5l.
Mains or 12v charging.
Dimensions: 17 x 18 x 15.5 cm.
Weight: 5.1kg.
Digital meter: display voltage 3 to 30 v.
Output: 12v(DC) max/ 10A: 5v USB/max 2A.
Instant max current 1200A.
Charging power: AC 100-240v, 50/60Hz, CE/UL, PSE.
Battery: ACID, DC 12v/14aH.
Cold Cranking Amps: 800.
Car Engine Oil Filling Device with Adaptors 11-Piece
New Updated Kit allows for fast oil filling without spillage Great for many late model vehicles with internal baffles 2 litre funnel fits adapters for wide application range colour-coded adapters for oil filler hole Special angled extension with swivel feature for hard-to-reach places.
Applications: Audi, BMW, Citroen, Ford, SEAT, Skoda, Peugeot, Renault, Vauxhall, VW etc.
Car Engine Oil Filling Device with Adaptors 7-Piece
Allows for fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel fits adapters for wide application range.
Colour-coded adapters for oil filler hole.
Special angled extension with swivel feature for hard-to-reach places.
Applications: Audi, BMW, Citroen, Ford, SEAT, Skoda, Peugeot, Renault, Vauxhall, VW etc.
Common Rail Diagnostic Set
Common Rail Flow Meter Set
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
Common Rail Flow Meter Set Updated Version
Assists with diagnosis of: Poor or no engine starting, smoke on tick-over or acceleration, overall lack of engine power, rough running, poor acceleration.
Designed for use on the injector return side of a common rail diesel system, measures return fuel flow on engines up to ten injectors in one test.
Applications: Bosch, Delphi, Denso, Siemens, etc.
Digital Battery Load Tester
Extendable Razor Scraper
Extra Deep Magnetic Tray
Extra Large Magnetic Tray Quad
Fluid Extractor Manual & Air Operational 10-Litres
Fluid Extractor Manual 6-Litres
Fluid Mate™, Multi-Fluid Syringe
Multi Purpose Syringe.
Special design to allow the extraction of all types of Vehicle fluids, Engine Oil, Transmission Oil, Petrol, Diesel, Add Blue & Many More.
Fluid mate comes complete with a special adaptor set for connection to fuel lines.
Also comes with different head connector to easily identify for oil or Fuel etc.
Supplied with viton seals.
1.5-Litre Capacity.
Fluid Transfer / Extractor Pump Set
Fluid Transfer / Extractor Pump Set
This 3-in-1 tool can be used for Automatic Transmission Fluids, Brake Bleeding (with adaptors), and Oil Dispensing.
This helpful tool with pressurized operation frees the operator from constant pumping.
Includes adapters to fit many Ford, BMW, Honda, Nissan & VW, Porsche, Mini Cooper, Audi & Mercedes transmissions capacity.
Hand Held Gas Torch
Induction Heater Kit EU Plug
Flameless rapid heat conduction reduces the risk of accidents & potential damage.
Reduces damaging the bolt and material around the equipment.
Can reach up to 500 degrees centigrade within a minute.
1 x 18mm coil(diameter of bore) (Length 20cm).
1 x 22mm coil(diameter of bore) (Length 20cm).
1 x 28mm coil(diameter of bore) (Length 20cm).
1 x 1.1m Flexible Soft Coil.
EU Plug Version.
Induction Heater Kit EU Plug 2
Principle of operation:
There is an alternating magnetic field.
The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up.
Allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch.
Within the shortest possible time, e.g. rusty nuts are heated and can be loosened.
Using for e.g. ball joint pinch bolts and other items on axle and engine.
Also for heating components such as bearings.
Includes the following induction coils:
Inductive coil 19 mm, 220 mm long (for Ø 10-16 mm).
Induction coil 27 mm, 220 mm long (for Ø 17-24 mm).
Induction coil 50 mm, 235 mm length (for heating small surfaces).
Formless coil, 780 mm, for heating of components (bearings, etc.).
Power supply: ~230V (50-60Hz).
Current: 7.5 Amps.
Max. power: 1.5 kw.
Protection class IP20.
Dimensions: 200 x 140 x 75mm.
Weight 4.5 Kg.
Induction Heater Kit UK Plug
The best way to loosen stuck bolts and parts without the need to cut or drill.
Flameless rapid heat induction reduces the risk of accidents & potential damage.
Reduces damaging the bolt and material around the equipment.
Can reach up to 500 degrees centigrade within a minute.
1 x 18mm coil(diameter of bore) (Length 20cm).
1 x 22mm coil(diameter of bore) (Length 20cm).
1 x 28mm coil(diameter of bore) (Length 20cm).
1 x 1.1m Flexible Soft Coil.
UK Plug Version.
Induction Heater Kit UK Plug 2
Principle of operation:
There is an alternating magnetic field.
The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up.
Allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch.
Within the shortest possible time, e.g. rusty nuts are heated and can be loosened.
Using for e.g. ball joint pinch bolts and other items on axle and engine.
Also for heating components such as bearings.
Includes the following induction coils:
Inductive coil 19 mm, 220 mm long (for Ø 10-16 mm).
Induction coil 27 mm, 220 mm long (for Ø 17-24 mm).
Induction coil 50 mm, 235 mm length (for heating small surfaces).
Formless coil, 780 mm, for heating of components (bearings, etc.).
Power supply: ~230V (50-60Hz).
Current: 7.5 Amps.
Max. power: 1.5 kw.
Protection class IP20.
Dimensions: 200 x 140 x 75mm.
Weight 4.5 Kg.
Induction Mate
Induction Mate™'s Flameless Technology
This induction heater is ideal for bolt removal. Usually during machine repair old bolts & nuts can get stuck & are extremely difficult to remove. The specially designed Induction Mate makes a tough job easy compared to the traditional method using dangerous flames.
30 Second Super Fast Heat Up
The Induction Mate™ is extremely reliable and saves time, with its 30 second heating up time, allowing to get the job done in half the time.
Bright LED Lighting
Designed with LED Light to improve visibility during the job or also great for use within confined areas where its harder to locate the bolt.
Multiple Coils Included Various sized coils to suit different bolt sizes, 18mm, 22mm, 28mm in diameter and all with a length of 20cm. Flexible soft coil also included,1 meter long.
Time Saving Rotating Locking Feature The Induction Mate™ has a specific feature which allows the user to replace the coil quickly then easily locking it into place by twisting the red rotating lock. To unlock it simply rotate the locking function back to release the coil.
Handle Locking Feature
Provides the option to remove the handle for flexibility and ease of use.
Other Specifications
Input Voltage: 220V 50/60Hz.
Input Current: 4A.
Output Power: 500-900W.
Output Voltage: 40V.
Output Current: 180A.
Induction Rope Wire for Induction Heater
Intelligent High Capacity Booster Pack; 12/24 Volt, 40000mAh
Providing a starting aid for a car with a defective battery is not without risk. During the connection of the terminals high peak voltages can occur with a devastating effect on the car electronics. Welzh intelligent booster has built in electronic safety features to avoid any electrical damage, with its advanced 8-point protection system ideal for keeping your clients components safe during frequent professional use.
Compatibility: 99% Vehicle Coverage.
Compact Size: 245 x 240 x 100mm.
Voltage: 5 (USB) / 12 / 24.
Power Efficiency: 95%.
Capacity: 40,000 mAh.
Lightweight: 2.4 kg.
Max Amps: 2600.
