Showing 97–120 of 248 results

Click-R Collar Plier

41.29 Ex. VAT
Used to release and reset reusable hose clips. Designed for releasing and resetting clic & clic-R type metal hose clips fitted to most engines. Spring loaded forged handles with PVC handles.

Cutting Disk For Stainless Steel 115 x 1.0 x 2.2mm (4 1/2” Inch) WerkConnect™ (400 per box)

236.19 Ex. VAT
Size: 115 x 1.0 x 2.2mm. For use on stainless steel. Quantity: 400. MPA Approved. Not for grinding.

Cutting Disk For Stainless Steel 115 x 1.0 x 2.2mm (4 1/2”) WerkConnect™ 10-Pieces

17.72 Ex. VAT
Width: 115mm. Centre: 22mm. Max RPM: 13280. Inox steel. For cutting only.

Cutting Disk For Stainless Steel 305 x 3.0 x 25.4mm(12” Inch) WerkConnectâ„¢ (25 per box)

129.88 Ex. VAT
Cutting Disk For Stainless Steel 305 x 3.0 x 25.4mm(12'' Inch) WerkConnectâ„¢ (25 per box)

CV Boot Clamp Pliers

41.29 Ex. VAT
Position Lock: Strong position locking mechanism to keep the pliers spread open. Great Hose Replacement Tool: Convenient for replacing lower radiator hoses. Ergonomic Handles: PVC dipped handles for improved grip and comfort. Other Specifications: Special "V" slot & cross slot jaws. Length:225mm

CV Boot Clamp Pliers 260mm

47.19 Ex. VAT
Applications: Earless clamps fitted to axle boots on Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes Benz, Nissan, Opel, Porsche, VAG. Length: 260mm. Dipped handles. Spring loaded action. Also suitable for thermoplastic axle boots. Suitable for clamps up to 100 mm diameter, for example Oetiker 168.

Dead Blow Hammer Set; 4-Piece

64.91 Ex. VAT
Piston hammer features an extended head that allows the hammer to pass the deck of the engine block for piston installation. Piston hammer provides dead blow action and absorbs shock, reducing the chance of injury. Complete range for a wide variety of Uses. Soft face to stop damage to surfaces. Includes. 7027-1-WW 1/2 lbs. Dead Blow Hammer. 7027-2-WW 1 lbs. Dead Blow Hammer. 7027-3-WW 2 lbs. Dead Blow Hammer. 7027-4-WW 32 oz. Piston Hammer.

Die Grinder & Attachment Set

52.14 Ex. VAT
Free speed: 22000r/min. Max. operating pressure: 0.65MPa. Avg. air consumption: 5cfm. Hose Size: 3/8?. Air inlet: 1/4?. Noise: Lpc,peak:106.5dB(A) LWA:103.5dB(A). LPA:92.5dB(A), Uncertainly K: 3dB(A). Vibration: Mean value: 1.56m/s2,Uncertainly K:0.22m/s2. Contents 1/4" air die grinder. 5 pcs 1/ 8"mounted grinding stones. 5 pcs 1/ 4"mounted grinding stones. 1/4" nipple. 1/ 8"collet. 2 pcs collet hand wrench.

Digital Vernier Calliper with Digital Display

35.38 Ex. VAT
Extra large display. Scale in mm/inch, reading 1/100mm. Zero reset in any position. Metric/inch conversion. / - Display. Incl. Battery. Supplied in Plastic case.

Door Trim Pliers

47.19 Ex. VAT
These special pliers have been designed to remove upholstery. such as door panels. The design of the tip allows easy access to all areas. The spring loaded handle gives greater leverage. Huge time saver.

Drill Bit Set, Fully Ground Cobalt Extra Stubby; 19-Piece Set

111.38 Ex. VAT
19-Piece Fully Ground Cobalt ''Extra Stubby'' Drill Set. Superbly designed for Automotive use to allow for used in restricted areas were conventional drills will not fit. High Strength HSS Cobalt Material for long life use. Sizes, 1-10mm.

Drill Bit Set; Cobalt, 19-Piece Set

59.01 Ex. VAT
Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm. Advanced 118 degree Fully ground Split Point. Short chisel edge for reduced drilling resistance. Suitable for drilling in steel, cast iron, non-ferrous metals, alloyed & non-alloyed material. Drill Bit Material: HSS 4241 Cobalt. Long lasting working capacity.

Drill Bit Set; Fully Ground HSS, Titanium Coated; 230-Piece Set

236.19 Ex. VAT
Fully ground from solid material (HSS) and titanium coated. These drills are ideal for pairing alloyed & unalloyed steel with a tensile strength up to 800 N/mm², other metals, cast iron & hard plastics. 10 of each size: 1, 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 10mm. 5 of each size: 9, 9.5, 10.5, 11, 11.5, 12, 12.5, 13mm.

Drill Bit Set; Fully Ground, 170-Piece Set

118.07 Ex. VAT
Drills manufactured in accordance with DIN 338. Roll forged. Ground edges. Sizes: 1.0-8.0 mm (in 0.5mm steps): 10 piece each. 8.5-10.0 mm (in 0, 5mm steps): 5 piece each.

Drill Bit Set; Fully Ground, Left Hand Cutting, 5-Piece

70.82 Ex. VAT
Sizes: 3, 5, 6, 8, 10mm. Titanium coated.

Drill Bit Set; Fully Ground; Cobalt, 170-Piece Set

177.13 Ex. VAT
Drill manufactured to DIN 338. Ground from solid material. 1.0-8.0 mm ascending to 0.5mm: 10 pieces each. 8.5-10.0 mm ascending to 0.5mm: 5 pieces in metal box. These drills are ideal for pairing alloyed & unalloyed steel with a tensile strength up to 800 N/mm², other metals, cast iron & hard plastics.

Drill Bit Set; Fully Ground; Cobalt, 25-Piece Set

70.82 Ex. VAT
Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm. Advanced 118 degree Fully ground Split Point. Short chisel edge for reduced drilling resistance. Suitable for drilling in steel, cast iron, non-ferrous metals, alloyed & non-alloyed material. Drill Bit Material: HSS 4241 Cobalt. Long-lasting working capacity.

Drill Bit Set; Twist Drill Set HSS Titanium nitrated 1 – 10 mm 170-Piece

128.18 Ex. VAT
Titanium Nitrated Coating: Twisted drill bits roll forged and coated with titanium nitrate allowing for increased durability & long lasting strength. Strong & Long Lasting Drill Bits: Drills manufactured in accordance with DIN 338. For Drilling in Various Materials: Suitable for drilling plastics, wood, steel, cast iron,non-ferrous metals, alloyed & non-alloyed material. Sizes Included: 1.0-8.0 mm (in 0.5mm steps): 10 piece each. 8.5-10.0 mm (in 0.5mm steps): 5 piece each.

Drill Out Kit with Guides; Universal

147.60 Ex. VAT
For use on cylinder heads, gearboxes, hubs etc. Also compatible with motor cycle, cars and truck engines. All drill bits are consumables. Helps to reduce expensive damage to the engine by keeping the drill in the exact position each time. Studs Included: 8mm-10mm.

Drive Shaft Squeezing Pliers

82.63 Ex. VAT
Designed to pre-tension the drive shaft circlip during assembly of the outer constant velocity joint. Suitable for: VW, Audi, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, SEAT, Skoda, Subaru, Suzuki, Toyota Etc. By holding the driveshaft circlip with the 8022 the outer drive shaft splines can be easily assembled onto the CV joint.

Ergonomic Ratchet Pipe Clamps

41.29 Ex. VAT
Designed to give a strong grip on hose lines whilst being quick to operate. Ratchet function with auto lock allows fast adjustment. Can be used on: hose pipes, brake pipes, fuel pipes etc.