Click-R Collar Plier
CV Boot Clamp Pliers
CV Boot Clamp Pliers 260mm
Applications: Earless clamps fitted to axle boots on Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes Benz, Nissan, Opel, Porsche, VAG.
Length: 260mm.
Dipped handles.
Spring loaded action.
Also suitable for thermoplastic axle boots.
Suitable for clamps up to 100 mm diameter, for example Oetiker 168.
Dead Blow Hammer Set; 4-Piece
Piston hammer features an extended head that allows the hammer to pass the deck of the engine block for piston installation.
Piston hammer provides dead blow action and absorbs shock, reducing the chance of injury.
Complete range for a wide variety of Uses.
Soft face to stop damage to surfaces.
Includes.
7027-1-WW 1/2 lbs. Dead Blow Hammer.
7027-2-WW 1 lbs. Dead Blow Hammer.
7027-3-WW 2 lbs. Dead Blow Hammer.
7027-4-WW 32 oz. Piston Hammer.
Die Grinder & Attachment Set
Free speed: 22000r/min.
Max. operating pressure: 0.65MPa.
Avg. air consumption: 5cfm.
Hose Size: 3/8?.
Air inlet: 1/4?.
Noise: Lpc,peak:106.5dB(A) LWA:103.5dB(A).
LPA:92.5dB(A), Uncertainly K: 3dB(A).
Vibration: Mean value: 1.56m/s2,Uncertainly K:0.22m/s2.
Contents
1/4" air die grinder.
5 pcs 1/ 8"mounted grinding stones.
5 pcs 1/ 4"mounted grinding stones.
1/4" nipple.
1/ 8"collet.
2 pcs collet hand wrench.
Digital Vernier Calliper with Digital Display
Door Trim Pliers
Drill Bit Set, Fully Ground Cobalt Extra Stubby; 19-Piece Set
Drill Bit Set; Cobalt, 19-Piece Set
Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm.
Advanced 118 degree Fully ground Split Point.
Short chisel edge for reduced drilling resistance.
Suitable for drilling in steel, cast iron, non-ferrous metals, alloyed & non-alloyed material.
Drill Bit Material: HSS 4241 Cobalt.
Long lasting working capacity.
Drill Bit Set; Fully Ground HSS, Titanium Coated; 230-Piece Set
Fully ground from solid material (HSS) and titanium coated.
These drills are ideal for pairing alloyed & unalloyed steel with a tensile strength up to 800 N/mm², other metals, cast iron & hard plastics.
10 of each size: 1, 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 10mm.
5 of each size: 9, 9.5, 10.5, 11, 11.5, 12, 12.5, 13mm.
Drill Bit Set; Fully Ground, 170-Piece Set
Drill Bit Set; Fully Ground; Cobalt, 170-Piece Set
Drill manufactured to DIN 338.
Ground from solid material.
1.0-8.0 mm ascending to 0.5mm: 10 pieces each.
8.5-10.0 mm ascending to 0.5mm: 5 pieces in metal box.
These drills are ideal for pairing alloyed & unalloyed steel with a tensile strength up to 800 N/mm², other metals, cast iron & hard plastics.
Drill Bit Set; Fully Ground; Cobalt, 25-Piece Set
Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm.
Advanced 118 degree Fully ground Split Point.
Short chisel edge for reduced drilling resistance.
Suitable for drilling in steel, cast iron, non-ferrous metals, alloyed & non-alloyed material.
Drill Bit Material: HSS 4241 Cobalt.
Long-lasting working capacity.
Drill Bit Set; Twist Drill Set HSS Titanium nitrated 1 – 10 mm 170-Piece
Titanium Nitrated Coating:
Twisted drill bits roll forged and coated with titanium nitrate allowing for increased durability & long lasting strength.
Strong & Long Lasting Drill Bits:
Drills manufactured in accordance with DIN 338.
For Drilling in Various Materials:
Suitable for drilling plastics, wood, steel, cast iron,non-ferrous metals, alloyed & non-alloyed material.
Sizes Included:
1.0-8.0 mm (in 0.5mm steps): 10 piece each.
8.5-10.0 mm (in 0.5mm steps): 5 piece each.
Drill Out Kit with Guides; Universal
Drive Shaft Squeezing Pliers
Designed to pre-tension the drive shaft circlip during assembly of the outer constant velocity joint.
Suitable for: VW, Audi, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, SEAT, Skoda, Subaru, Suzuki, Toyota Etc.
By holding the driveshaft circlip with the 8022 the outer drive shaft splines can be easily assembled onto the CV joint.
