Showing 1–24 of 25 results

12-Volt Automotive Power Surge Protector

£54.84 Ex. VAT
This is a must-have piece of kit for anyone working on a vehicle when plasma cutting or welding. You will save huge amounts of time as it allows the battery to be kept installed in the vehicle. Prevents damage to sensitive electronics from voltage spikes. Recommended to be used before any work on the vehicle. Battery clips are heavy duty and fully insulated. Housed in a hard wearing and durable case. Complete with indicators to show for faults.

92-Piece Multipurpose Electronic Cable Set

£199.41 Ex. VAT
Suitable for a wide variety of vehicles from all markets including Europe, America and Japan. 2x LED test adapter, for testing voltage and ground signals, example: Hall sensors, injectors, solenoid valves, etc. 48x test adapter with flat plug / flat sockets, sizes 0.7 - 0.8 - 1.2 - 2.0 - 2.5 - 3.0 - 5.0 - 6.0mm. 24x test adapter with round plugs / round sockets, sizes 1.5 - 2.0 - 3.5 - 4.0mm. 2x SRS air bag simulator for electrical simulation of air bag and belt tensioner generators. 2x potentiometer (5KOhm), to simulate temperature and throttle position sensors. 4x test leads with banana plugs on both sides, stackable. 2x 1-to-2 connector. 2x alligator clips. 4x acicular probe. 2x probes.

Assorted Automotive Electric Supaseal Connector Kit 425-Pieces

£24.75 Ex. VAT
Includes: Female & Male terminals with yellow seals. Female Connectors: 1, 2, 3, 4, 5 & 6 pin. Male Connectors: 1, 2, 3, 4, 5 & 6 pin.

ATF Flushing Machine + Adaptor Kit

£1,406.25 Ex. VAT
Designed to service vehicles as quickly as possible with one machine to extract, clean and refill transmission fluid. 29-Piece adaptor & hose set plus additional small parts & accessories all supplied in a protective carry case. Fluid quality monitoring tubes to easily see the state of fluid being pumped in and out. High quality external fluid connector for sourcing fluid from large external containers. Rear storage point to keep adaptor case securely with machine at all times. 2x 30L Fluid holders with level markings on the front of the unit. Emergency stop button to meet workshop safety regulations. Removable filter with easy access for replacement. Pressure gauges: 0-10kg/cm2 & 0-150 PSI. High quality hosing and fluid connectors. Powered by 12v car battery connection. Dimensions: 39 x 19 x 14.5 inches.

Cordless Circuit Tester

£28.13 Ex. VAT
No earth clips to worry about simply place the needle into the wire and touch a metal barrel to get a reading. Can be used on sensitive components such as computers. Compact design with LED indicator. Applications: 3 to 28V DC.

Cordless Circuit Tester; Heavy Duty

£44.44 Ex. VAT
3-30V detection range of DC voltage. Bi-directional polarity testing: Power and Ground. Dual colour LED indicates red for power and green for ground on 6V, 12V and 24V systems. For use on automotive, commercial vehicle and equipment repair.

Diesel Engine Compression Master Test Kit

£341.44 Ex. VAT
Designed to cover the majority of modern diesel engines. Quickly match the correct adapters thanks to the collar system. Included: 6 clamp on injector adapters suitable for cars, vans, LGVs, HGVs, farm vehicles and marine vehicles. 2 pack of spare seals and nozzles. Clamp and claw adapters. 20 dummy glow plugs. 1000 PSI 2.5'' gauge. 5 injector adapters. Applications: 5x Glow plug Adaptors with popular coverage including a selection from the Alfa, Mazda, PAS, BMW, Chrysler, Nissan, Fiat, Ford, Mercedes, Mitsubishi, Renault, Rover, Saab, Suzuki, VAG, Vauxhall, and Volvo ranges of diesel engines. 6x Injector Adaptors for M24, M22 and M20 on Nissan, Ford, PSA, Rover, Mercedes, BMW, Landrover, VAG, Toyota & Vauxhall engines. 5x Glow plug Adaptors for LDV, Ford, Hyundai, Mazda, Mitsubishi, Toyota, Suzuki & Nissan engines. 5x Glowplug Adaptors with coverage of lsuzu, Mercedes, Renault, Vauxhall engines. 4x Glow plug Adaptors with coverage of Fait, Alfa & Ford PSA engines. Also includes Stanadyne injector for Ford Transit (-00). Clamp-on injector Adaptor Set covers slide in, clamp or claw held injectors found across all sizes of engine-cars to larger diesels.

Diesel Engine Compression Tester Set

£77.63 Ex. VAT
Included various adaptors (for glow plugs and dummy injectors) make this kit useful for many car types- 1 manometer (0-70 bar) (tolerance -5%)- incl. 90° elbow suitable for nearly all brands, such as: BMW, Mercedes, Ford, VW, Toyota, Renault, Volvo Mazda, Citroen, Opel, Nissan, Peugeot, Vauxhall. Includes following adapters: Glow plug adapter, M10 x 1.25 (114.5 mm). Glow plug adapter, M10 x 1.0 (119 mm long). Glow plug adapter, M10 x 1.25 (73.5 mm long). Glow plug adapter, M12 x 1.25 (54 mm long). Glow plug adapter, M14 x 1.25 (72 mm long). Injector adapter, M20 x 1.5 (78 mm long). Injector adapter, M24 x 2.0 (65 mm long). Injector adapter, Ø 21 mm (114 mm long). Stanadyne injector adapter, Ø 19 mm (112 mm long).

Digital LCD 12-24V Wide Range Circuit Tester

£33.47 Ex. VAT
Can be used on cars, vans, boats, RVs and many other 12/24vcircuits. Sharp stainless steel needle allows easy access to circuits. Small ergonomic design allows for easy portability. Digital LED display. Cable length: 11ft. Voltage: DG 12-24v.

Digital LCD 3-49 Volts Wide Range Circuit Tester

£44.44 Ex. VAT
For use on cars, boats, trailers, vans & commercial vehicles. Includes backlit LCD display for accurate voltage reading. Stainless steel probe allows for easy piercing. Reads positive & negative voltages. Voltage: DC 3-49V. Cable length: 11 ft.

Digital Multifunction Voltage Tester

£77.63 Ex. VAT
Voltage Range: 6-690V AC/DC. Frequency Range: DC, 45-65Hz. 2x1.5V Alkaline Battery, AAA or Equivalent. Accuracy: /-(3%rdg 3d).

Digital Multimeter

£33.47 Ex. VAT
Suitable for the following ranges; DC: 200mV, 2V, 20V, 200V, 600V. AC: 200 - 600V. Resistance: 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ DC Current: 20μA, 200μA, 2mA, 20mA, 200mA, 10A. Power supply: 9v. Suitable for CAT II area use. Shock resistant casing. Prop hinge.

Electronic Stethoscope

£164.95 Ex. VAT
Designed to help find the location of problematic noises quickly, reducing the diagnostic time. 1 way amplifier allows for a quick and simple method of testing. Can be used on many parts of the engine including the alternator etc. Includes 6 way amplifier and colour coded probes. Alligator clips allows for use on various test points. Padded headset and band gives extra comfort for when working for extended period of time.

Electronic Towing Trailer Tester 7 & 13 Pin Tester

£22.22 Ex. VAT
This tester allows for fast & accurate checking of 12V electrical systems on trailers, cars, motorhomes, etc. Suitable for 7- and 13-pin connectors Includes adaptor 7- to 13-pin and 13- to 7-pin For 9 V monoblock battery (not included)

Engine Fuel Pressure Gauge Set, 0-8 bar

£339.47 Ex. VAT
All purpose set with precision manometer: 0.03-8 bar with tolerance -2%. For mechanic and electronic fuel injection systems. 30 adaptors make this set suitable for cars including: Mercedes, BMW, Audi, Honda, Mazda, Renault, Peugeot etc. Makes checking of leak tightness easier, system and control pressure due to 3-way valve. Can be used for nearly all injection systems, e.g.: K-Jettronic, L/LH-Jetronic, Motronic, Motronic-Jetronic, MPFI, TBI, EFI, DIGIFANT 1/2, CIS-Digital, Weber CFI, Spi, Single point, Multipoint.

Insulation Resistance Multimeter CAT 3 RMS;

£129.32 Ex. VAT
True RMS Digital Multimeter: Designed for a capabilities of a wide range of reading tasks. Easy to use and are

Master Diesel & Petrol Compression – Leakage Test Kit

£442.97 Ex. VAT
Suitable for most petrol and modern HDi, TDCi, pump injector and older diesel engines. Compression pressure testing up to 50 bar (725PSI) possible. Quick couplings in straight and angled versions. Applications: 5x Glow plug Adaptors with popular coverage including a selection from the Alfa, Mazda, PAS, BMW, Chrysler, Nissan, Fiat, Ford, Mercedes, Mitsubishi, Renault, Rover, Saab, Suzuki, VAG, Vauxhall, and Volvo ranges of diesel engines. 6x Injector Adaptors for M24, M22 and M20 on Nissan, Ford, PSA, Rover, Mercedes, BMW, Landrover, VAG, Toyota & Vauxhall engines. 5x Glow plug Adaptors for LDV, Ford, Hyundai, Mazda, Mitsubishi, Toyota, Suzuki & Nissan engines. 5x Glow plug Adaptors with coverage of lsuzu, Mercedes, Renault, Vauxhall engines. 4x Glow plug Adaptors with coverage of Fait, Alfa & Ford PSA engines. Also includes Stanadyne injector for Ford Transit (-00).

Multi Function Automotive Tester with Temperature Measurement

£166.22 Ex. VAT
Measure a wide range of automotive components for temperature and electrical specs including: Voltage measurement range: 0-70V. DC Current measurement range: 0-5A DC. Frequency measurement range: 0-300 KHZ (Square Wave). Resistance measurement range: 0-200. Measured Temperature range: 5-200C / 41-392F. Illuminated Colour Screen Display. Supply voltage: 8-30v DC. Cable length: 2m. Includes: Power clips suitable for car batteries. Cigarette lighter plug. Auxiliary ground connector. Adaptor connector. Standard Probe. Long testing probe. Wire piercing probe.

Oil Pressure Test Kit

£66.66 Ex. VAT
Helps to locate faults in the oil pump system. Scale measuring 0 - 10 bar (tolerance -5%). Includes adaptors: R 1/8“ DIN 2999, 1/8“ x 27 NPT,. ¼“ x 18 NPT, 3/8“ x 20 UNF, ½“ x 20 UNF. M10 x 10, M12 x 1, 5, M14 x 1, 5. M16 x 1, 5, M18 x 1, 5, 90°.

Petrol Engine Compression Tester

£55.41 Ex. VAT
This compression tester can be quickly set to your bike / car, then you can get accurate readings in valves, piston rings, cylinder bores or head gaskets. Manometer with double graduation ( 0 to 300 psi, 0- 21 kg / cm 2 ) and with rubber protection to prevent scratches. Drain valve with full copper nickel plating, anti -oxidation and corrosion. 4 Adapters: M10x1.0mm, M12x1.25mm, M14x1.25mm, M18X1.5mm. M12, M14, M18 adapters are suitable for car. M10 adapter is suitable for motorcycles. Pressure gauge with rubber protection. Angled pressure tube length: 160mm. Pressure gauge Diameter: 75mm. Test pressure: max 21 bar / 300 psi. Pressure tube length: 150mm. Hose Overall length: 430mm. Case Size: 265 x 210 x 65mm.

Refractometer for AdBlue

£43.03 Ex. VAT
This tool measures the strength of AdBlue®, screen wash, battery fluid & antifreeze by measuring the refractive index of light passing through the mixture solution. Suitable for artificial antifreeze mixtures featuring G13, aqueous/urea contents of AdBlue® & long life OAT (Organic Acid Technology). Temperature corrected prism ensures accurate readings. To calibrate use water. Eyepiece with adjustable focus. Comes with pipette & storage box.