Showing all 14 results

19-Piece Left Cutting Drill Bits 1-10MM

£77.63 Ex. VAT
Left hand drill set is great for extracting broken or stripped screws, studs and bolts. Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm. Made from high speed steel with Cobalt.

Drill Bit Set; Cobalt, 19-Piece Set

£55.41 Ex. VAT
Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm. Advanced 118 degree Fully ground Split Point. Short chisel edge for reduced drilling resistance. Suitable for drilling in steel, cast iron, non-ferrous metals, alloyed & non-alloyed material. Drill Bit Material: HSS 4241 Cobalt. Long lasting working capacity.

Drill Bit Set; Fully Ground HSS, Titanium Coated; 230-Piece Set

£221.63 Ex. VAT
Fully ground from solid material (HSS) and titanium coated. These drills are ideal for pairing alloyed & unalloyed steel with a tensile strength up to 800 N/mm², other metals, cast iron & hard plastics. 10 of each size: 1, 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 10mm. 5 of each size: 9, 9.5, 10.5, 11, 11.5, 12, 12.5, 13mm.

Drill Bit Set; Fully Ground, 170-Piece Set

£110.81 Ex. VAT
Drills manufactured in accordance with DIN 338. Roll forged. Ground edges. Sizes: 1.0-8.0 mm (in 0.5mm steps): 10 piece each. 8.5-10.0 mm (in 0, 5mm steps): 5 piece each.

Drill Bit Set; Fully Ground, Left Hand Cutting, 5-Piece

£66.66 Ex. VAT
Sizes: 3, 5, 6, 8, 10mm. Titanium coated.

Drill Bit Set; Fully Ground; Cobalt, 170-Piece Set

£166.22 Ex. VAT
Drill manufactured to DIN 338. Ground from solid material. 1.0-8.0 mm ascending to 0.5mm: 10 pieces each. 8.5-10.0 mm ascending to 0.5mm: 5 pieces in metal box. These drills are ideal for pairing alloyed & unalloyed steel with a tensile strength up to 800 N/mm², other metals, cast iron & hard plastics.

Drill Bit Set; Fully Ground; Cobalt, 25-Piece Set

£66.66 Ex. VAT
Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm. Advanced 118 degree Fully ground Split Point. Short chisel edge for reduced drilling resistance. Suitable for drilling in steel, cast iron, non-ferrous metals, alloyed & non-alloyed material. Drill Bit Material: HSS 4241 Cobalt. Long-lasting working capacity.

Drill Bit Set; Twist Drill Set HSS Titanium nitrated 1 – 10 mm 170-Piece

£164.95 Ex. VAT
Titanium Nitrated Coating: Twisted drill bits roll forged and coated with titanium nitrate allowing for increased durability & long lasting strength. Strong & Long Lasting Drill Bits: Drills manufactured in accordance with DIN 338. For Drilling in Various Materials: Suitable for drilling plastics, wood, steel, cast iron,non-ferrous metals, alloyed & non-alloyed material. Sizes Included: 1.0-8.0 mm (in 0.5mm steps): 10 piece each. 8.5-10.0 mm (in 0.5mm steps): 5 piece each.

Drill Out Kit with Guides; Universal

£138.94 Ex. VAT
For use on cylinder heads, gearboxes, hubs etc. Also compatible with motor cycle, cars and truck engines. All drill bits are consumables. Helps to reduce expensive damage to the engine by keeping the drill in the exact position each time. Studs Included: 8mm-10mm.

Step Drills; 3-Piece Set Titanium; 4-30mm

£44.44 Ex. VAT
Sizes: 4-12, 4-20, 4-30mm. Drill steps in 2mm increments. Long lasting HSS steel.

Valve Lapping Tool Kit

£48.95 Ex. VAT
Set includes a 5-inch rubber roller attachment that has two 8mm steel shanks to fit your drill. Includes 16mm, 20mm, 30mm, 35mm, and 45mm attachable rubber suction cups. The suction cups make fitting and seating various valve sizes easy. Use with your existing electric drill and automotive valve grinding compound (not included) to correct surface irregularities and to remove sub-surface damage on your new valves when working on a top-bottom rebuild.

Welzh Cone Twister; 4-20mm

£25.31 Ex. VAT
Cone Twister Sizing: 4-20 mm. Drills Through Various Material: Will drill steel, non ferrous metals & hard plastics. Jam Free Design: Special profile design allowing the step drill bit to easily go through various materials. Strong & Sharp Build: Long lasting HSS steel.

Welzh Cone Twister; 4-32mm

£39.32 Ex. VAT
Cone Twister Sizing: 4-32 mm. Drills Through Various Material: Will drill steel, non ferrous metals & hard plastics. Strong &

Welzh Cone Twisters; 4-12mm

£33.19 Ex. VAT
Cone Twister Sizing: 4-12 mm. Drills Through Various Material: Will drill steel, non ferrous metals & hard plastics. Jam Free Design: Special profile design allowing the step drill bit to easily go through various materials. Strong & Sharp Build: Long lasting HSS steel.