Showing 1–24 of 34 results

12 Volt Oil Pump

£33.47 Ex. VAT
Max. flow rate for engine oil approx. 0, 2l /min. Ideal equipment for quick and clean oil-changes. The oil-pump works by connecting the clamps to the 12V car battery. Can remove 100% of the used oil if inserted through the dipstick opening. Complete with all necessary accessories. Max. suction lift height: 70 cm. No suitable for fuel and other easy flammable fluids. .

16-Litre Fuel Pan

£33.47 Ex. VAT
Made from HDPE oil and fuel resistant plastic. Impact resistant. Diameter: 570mm. Height: 120mm. Weight: 1075g. .

16-Litre Oil Pan Orange

£33.47 Ex. VAT
Made from HDPE oil and fuel resistant plastic. Impact resistant. Diameter: 570mm. Height: 120mm. Weight: 1075g.

2-Piece Universal Oil Funnel Set

£44.44 Ex. VAT
Designed to fit the majority of oil intakes. The specially designed clamp can be adjusted to fit. Minimise spilling and mess. Stable and secure fitting.

40L Pneumatic Fuel Extracting Unit

£863.72 Ex. VAT
For extracting gasoline and diesel fuel allows an easy emptying of tanks, fuel pumps, tank sensors or emptying wrongly filled tanks. 3 suction tubes Ø 6, 8, 10 mm - 2 m long. Working pressure: 5 - 8 bar. Air consumption: 170 l/min. Suction power: 5 l/min. Material: Stainless Steel. Capacity: 40-Litres.

5-Litre Oil Flask & Measurement Twin Pack

£55.41 Ex. VAT
Twin Pack Of 5-Litre Flask. One fitted with a lid the other with a flexible Spout. Capacity 5-Litres.

70 Litre Mobile Suction Evac Oil Drainer, Air support

£442.97 Ex. VAT
Sucking speed: 0.6-1.6L/Min. Work pressure: 7-8Bar. Collecting height: 1.85m. Tack capacity: 90L. Capacity of measuring cup: 10L. Length of suction pipe: 1.5m. Length of drainpipe: 2.0m. Total weight: 37kgs. Overall dimension: 500x500x500. Fixed wheel: 7''. Swivel castor: 4''. Function: Multi-function: oil sucking, oil. collecting & oil filling. Additional large oil tray convenient for oil collecting. Easy use to drain oil in low pressure. Transparent measuring cup for easy oil observation. Different type of nozzles is equipped for various condition.

70 Litre Waste Oil Drain Receiver

£276.75 Ex. VAT
Designed for containing waste oils, such as on engines, gearboxes, rear axles, etc. Compressed air connection, makes it easier to empty the container without oil spillage. Hopper capacity: 8 litres (Ø 48 cm). 4 castors, 2 swivel wheels for easy maneuvering (Ø 150 / 75 mm). Includes emptying hose. Length 165 cm. Min. Height: 112 cm. Max. Height: 162 cm. Container: Ø 41 cm / height 82 cm.

Adaptor For VAG Models For use with 2887-WW

£22.22 Ex. VAT
New updated adaptor for VAG Models. For use with 2887-WW. Applications: VW - Golf, Polo, Jetta, Passat. Skoda - Octavia, Fabia. Seat - Leon.

AdBlue Syringe 1.5L

£77.63 Ex. VAT
Designed to allow the filling of AdBlue fluid to commercial vehicles. Separate container prevents contamination. 1.5L capacity.

ATF Adaptor For DCT Gear Boxes on VAG Group

£33.47 Ex. VAT
For use on VAG vehicles fitted with 7 speed dual clutch transmission gearboxes. Designed for use with WELZH 1018-1-WW. Equivalent to OEM tool VAS6617/12.

Car Engine Oil Filling Device with Adaptors 11-Piece

£99.84 Ex. VAT
New Updated Kit allows for fast oil filling without spillage Great for many late model vehicles with internal baffles 2 litre funnel fits adapters for wide application range colour-coded adapters for oil filler hole Special angled extension with swivel feature for hard-to-reach places. Applications: Audi, BMW, Citroen, Ford, SEAT, Skoda, Peugeot, Renault, Vauxhall, VW etc.

Car Engine Oil Filling Device with Adaptors 7-Piece

£99.84 Ex. VAT
Allows for fast oil filling without spillage. Great for many late model vehicles with internal baffles. 2 litre funnel fits adapters for wide application range. Colour-coded adapters for oil filler hole. Special angled extension with swivel feature for hard-to-reach places. Applications: Audi, BMW, Citroen, Ford, SEAT, Skoda, Peugeot, Renault, Vauxhall, VW etc.

Common Rail Diagnostic Set

£77.63 Ex. VAT
For common rail engines, up to 6 injectors. Suitable for various injector brands. Determination of the run back volume via glass tubes or measurement cartridges. Includes 6 glass tubes, 6 measurement. Cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks.

Common Rail Flow Meter Set

£110.81 Ex. VAT
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc. Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens. Run back amount can be measured accurately via the glass tubes. For use on common rail engines with up to 6 injectors.

Common Rail Flow Meter Set Updated Version

£221.63 Ex. VAT
Assists with diagnosis of: Poor or no engine starting, smoke on tick-over or acceleration, overall lack of engine power, rough running, poor acceleration. Designed for use on the injector return side of a common rail diesel system, measures return fuel flow on engines up to ten injectors in one test. Applications: Bosch, Delphi, Denso, Siemens, etc.

Fluid Extractor Manual & Air Operational 10-Litres

£221.63 Ex. VAT
Can be operated via pneumatic air system or hand pump. Transparent body to for visibility of the fluid during use. Suitable for fluid evacuation. Can be used for, Petrol, Diesel Oil Etc. Multiple Adapters. Maintenance free. 10L capacity.

Fluid Extractor Manual 6-Litres

£144.00 Ex. VAT
Manually Operated. Transparent body to for visibility of the fluid during use. Suitable for fluid evacuation. Maintenance free. Fitted with Viton Seals. 6L capacity.

Fluid Mate™, Multi-Fluid Syringe

£110.81 Ex. VAT
Multi Purpose Syringe. Special design to allow the extraction of all types of Vehicle fluids, Engine Oil, Transmission Oil, Petrol, Diesel, Add Blue & Many More. Fluid mate comes complete with a special adaptor set for connection to fuel lines. Also comes with different head connector to easily identify for oil or Fuel etc. Supplied with viton seals. 1.5-Litre Capacity.

Fluid Transfer / Extractor Pump Set

£79.03 Ex. VAT
Works for Transferring or Siphoning All Types of Automotive Fluid. Quickly removes transmission oil from automatic transmissions that are over filled. Also works great for adding oil to differentials. Translucent 1.1 Quart /1.1 Litre capacity cylinder body is marked in both English and metric.

Fluid Transfer / Extractor Pump Set

£144.00 Ex. VAT
This 3-in-1 tool can be used for Automatic Transmission Fluids, Brake Bleeding (with adaptors), and Oil Dispensing. This helpful tool with pressurized operation frees the operator from constant pumping. Includes adapters to fit many Ford, BMW, Honda, Nissan & VW, Porsche, Mini Cooper, Audi & Mercedes transmissions capacity.