16-Piece Slide Hammer Puller Set
16-Piece Slide Hammer Puller Set
17-Piece Mounting Press Set
Designed for Bearing Work:
The pressure piece set is an essential for bearing, female & simmer ring work.
Includes Driver Tool:
The driver tool can be used for bearing assembly or disassembly for motorcycles, cars, trucks, tractors, electric motors, and other uses.
3 Drivers Included:
110/140/160mm.
Adapter Sizes:
10-12,12-14,14-16,15-17,16-18,
18-20,20-22,22-24,25-27,28-30,
30-34,32-36,35-40,38-42mm
21-Piece Extra Large Mounting Press Set
Suitable for mounting bearings and sealing rings.
Particularly useful when used with a hydraulic press.
This kit includes 17 mounting pads.
Ø 70 to 150 mm (5 mm steps).
273 mm metal handle for use with a hammer.
Material:Â carbon steel.
52-Piece Mounting Press Set
Suitable for mounting of bearings, sealing rings and rubbers.
Works well with WELZH 1070-WW.
This kit includes mounting pads in following sizes:
18 to 65 mm (1 mm steps) and 74mm.
12 mm Ø bore.
180 mm metal handle for use with hammer.
Bearing Install and Removal Tool Kit; Universal, 23pcs
Reduce the chance of damage to hub and bearing.
Suitable for removing and installing large industrial bearing.
Drift Sizes Ø: 55, 59, 63, 66.5, 70, 71.5, 73, 73.5, 75, 77.5, 81.5, 83.5, 88.5mm.
Sleeve Ø External: 76, 86, 92, 101mm.
Hub screw length: 210mm.
Hub screw drive: 32, 38mm.
Bearing Mounting Press Set; 52pcs
Suitable for mounting of bearings, sealing rings and rubbers.
Works well with WELZH 1070-WW.
This kit includes mounting pads in following sizes:
18 to 65 mm (1 mm steps) and 74mm.
12 mm Ø bore.
180 mm metal handle for use with hammer.
Bearing Puller for Blind Hole Bearings; 5-Piece
Suitable for extracting bearings, bushings, sleeves, etc.
Especially for removing out blind holes.Includes:
370 mm slide hammer, 1430 g.
4 spreading claws: 10-14, 15-19, 18-25 and 25-32mm.
Bearing Puller for Ford Transit Inner Front Wheel Bearings
Grips on the bearing taper and does not need to act as a wedge.
Provides a safer, faster means of bearing removal without grinding.
An engineered solution specifically designed for the Ford Transit with 3 legged puller design.
Must be used in with 1133-WW.
Welzh Master kit 60030-WW.
Bearing Race and Seal Driver; Universal, Adjustable
Durable and tough aluminium construction with rubberised striking tip.
Bearing Removal Tool for Ford Transit Custom Front Hubs
Front Bearing Tool For Ford Transit Custom Vans 2012- Onwards.
For the GEN 3 Bearing on Transit Custom which have a built in drive flange.
Enables the damage free removal of the front Wheel- bearing / Brake Disc assembly.
With disc/bearing assembly removed the tool can be used to separate the disc and bearing.
Bearing Separator 10-30mm
Designed to separate bearings.
Bearing Separator 105-150mm
Designed to separate bearings.
Bearing Separator 150-200mm
Designed to separate bearings.
Bearing Separator 30-50mm
Designed to separate bearings.
Bearing Separator 50-75mm
Designed to separate bearings.
Bearing Separator 75-105mm
Designed to separate bearings.
Bearing Separator Kit; 14-Piece
Designed for easily removing bearings, internal rings and other tightly and narrowly mounted parts.
Includes shifter and two splitter knives.
Knife sizes: 30-50 mm and 50-75mm.
Bearing Separator Kit; 5pcs, 6.35 to 228.6mm
The Welzh bearing separator kit contains the most popular sizes needed for the automotive and workshop sector, also included is a pulley pulling attachment.
Bearing separator 60.452mm maximum spread and 16.129mm minimum spread.
Bearing separator 129.032mm maximum spread and 50.8mm minimum spread.
Bearing separator 228.6mm maximum spread and 25.4mm minimum spread.
Bearing separator 258.064mm maximum spread and 32.258mm minimum spread.
Pulley pulling attachment with a 127mm maximum and 25.4mm minimum spread.
Bearing Tool Kit; Universal, 31-Piece
Universal use on most wheel bearings allows disassembly and assembly of the wheel hub and the wheel bearings.
Includes pressure plates with diameter: 50, 55, 59, 63.3, 66.6, 70.3, 71.5, 73.1, 73.4, 74.8, 77.5mm.
Compact Wheel Bearing Kit 62, 66, 72, 85mm GEN2 VAG Master Kit
The GEN 2 type of wheel bearing is predominantly fitted to models from VW Group.
Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers.
Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings.
GEN2 Combination Kit for Audi / Seat / Skoda / VW applications.
62mm Kit - Audi A2, VW Lupo (Front).
66mm Kit - Skoda Fabia, VW Fox (Front), Polo.
72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front).
85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear).
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 62, 66, 72, 78, 82, 85mm GEN2
The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo.
Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers Audi, Seat, Skoda & VW.
Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings.
Consists of all necessary parts from the 62, 66, 72, 78, 82 & 85mm kits:
62mm Kit - Audi A2, VW Lupo (Front).
66mm Kit - Skoda Fabia, VW Fox (Front), Polo.
72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front).
78mm Kit - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3.
82mm Kit - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70.
85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear).
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 62, 66, 72mm GEN2
Suitable for following common VAG models: Audi A2, VW Lupo - Polo - Fox, Seat Ibiza, Skoda Fabia.
Fits on 62, 66 and 72 mm bearing unit.
Works direct on the vehicle.
Minimizes the working time.
Simple and safe handling.
Compact Wheel Bearing Kit; 78mm GEN2
Facilitates assembly and disassembly of front wheel hub-bearing unit.
Suitable for following models:
Ford Focus 2 as of 2004, C-Max as of 2003.
Volvo C30 as of 2006, C70 Cabriolet as of 2006. S40 as of 2004, V50 as of 2004, Mazda.
Designed to work with OEM hub units.
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 82mm GEN2
Replacement spindle available: 10100-WW.