Showing 1–24 of 90 results

13-Piece Diesel Pump Timing Set

£133.03 Ex. VAT
A measurement tool designed for resetting the timing position for diesel engines with the fuel pump.

2-Piece Ignition Coil Puller For Opel-Vauxhall

£22.22 Ex. VAT
Special design for pulling out the ignition coil. For Opel, VW and other applications: 3- BZW,4-ZYLINDER BENZIN-EINSPRITZMOTOREN. Z.B. BEI OPEL AGILA-A, ASTRA-F, ASTRA-G, ASTRA-H, ASTRA-J, CALIBRA, COMBO, CORSA-B, CORSA-C, CORSA-D, FRONTERA-A, FRONTERA-B, INSIGNIA, MERIVA-A, MERIVA-B, OMEGA-B, SIGNUM, TIGRA-A, TIGRA-B, VECTRA-B, VECTRA-C, ZAFIRA-A, ZAFIRA-B. Engine Codes: LDD, LDE, LLU, LUH, LUJ, 2HO, A10XEP, A14NEL, A14NET, A14XER, X14NZ, X14SZ, X14XE, A16LET, A16XER, X16SZR, X16XE, X16XEL, A18XER, X18XE, X20SE, X20XEV, X22SE, X22XE, Y22SE, Z10XEP, Z12XE, Z12XEP, Z14XE, Z14XEL, Z14XEP, Z16LEL, Z16LER, Z16LET, Z16XE, Z16XER, Z16YNG, Z18XE, Z18XER, 20LEH, Z20LER, C22SEL.

26-Piece Engine Timing Tool Set For BMW Engines, N42, N46

£276.75 Ex. VAT
This kit has been designed to allows setting and adjusting of the timing on BMW models with N42, N46, B18/-A, B20/-A/-B engine codes. Applications: BMW: 1, 3, 5, X3, Z4 (models: E87-46-60-85-83-90-91). Contains important tools for camshaft assembly and disassembly also for valve timing of camshafts. Included OEM tools: clamps for intermediate lever: OEM 119310. bearing bridge holder: OEM 119320. Thumbscrew: OEM 119302. Eccentric shaft holder: OEM 119301. Camshaft locking tool: OEM 119290. Camshaft locking tool (inlet): OEM 119302. Clamping tool: OEM 11940. Spring holder: 119390. Camshaft sensor tool: OEM 119350. Screw: OEM 119390. Camshaft rotation key: OEM 119270. Crankshaft locking tool (straight): OEM 112300. Mounting bolts 3x: OEM 119320. Screw: OEM 119290. Camshaft locking tool, to be used as OEM 119290. Crankshaft locking tool (angled): OEM 119190. Mounting bolts: OEM 119320. Setting tool for balancer shaft: OEM 119330.

5-Piece Auxiliary Belt Tensioner Set

£73.07 Ex. VAT
Auxiliary Belt Tensioner Set Provides a safe and controlled method of adjusting the tensioner position during removal and installation of the auxiliary belt. The tensioner features a raised peg, which acts as a location to apply leverage to the tensioner to remove or install the belt. Contains a series of adaptors, along with an extension bar to allow easy purchase on the raised peg, which can then be used with an appropriate tensioner wrench and low profile thin walled socket such as the items contained in the set. Applications; 1.4 / 1.5 / 1.6 / 2.0 / 2.2 Diesel Engines FORD - PSA, 2.0 / 2.2??DW10 and DW12 engines.

5-piece Engine Timing Tool Set for Ford Focus 1.6 TI-VCT & 2.0 TDCI Engines

£88.59 Ex. VAT
This timing tool set includes indispensable tools for checking and adjusting your engine's control times or replacing its tooth belt. This set is suitable for Ford Focus 1.6 TI-VCT, engine type HXDA (2003-2007) and 2.0 TDCI engines, engine types G6DA, G6DB, G6DC (2003-2007).

Alternator Pulley Tool Set; For For Eco-Blue Diesel 2.0

£32.57 Ex. VAT
Alternator Pulley Tool Set: Designed for removal & installation of the over-running alternator pulley. Applications: Transit Custom 2012,Kuga 2013, Transit 2014, Mondeo 2014, Focus 2015, Galaxy 2015, S-Max 2015, C-Max 2015, Edge 2016 & Transit 2019. Specifications: 24 mm length. 1/2?? Drive.

Belt Tensioner Wrench, Ford Duratorq Engines

£99.84 Ex. VAT
Designed for Ford Mondeo models with Duratorq 2.0, 2.2l TDDi/TDCi engines. Suitable for engines with D5BA, D6BA, HJBA, B, HJBC, FMBA, N7BA, QJBB and QJBA engine codes. OEM: 303 676.

BMW Timing Tool Set S54

£155.25 Ex. VAT
Designed for setting and adjusting the camshaft timing when installing the VANOS adjustment unit on BWM S54 engines. Applications: BMW M3.

Camshaft Holders; Universal

£61.31 Ex. VAT
This cam gear holder's universal design is quick and easy to install. Excellent for diesel injection pump belt replacement. Clamp between the engine block or head & the back of the gear to lock in place. Use on single, dual or quad cam engines to hold valve timing during belt replacement. 4-Piece set.

Citroen & Peugeot Master

£155.25 Ex. VAT
Engine adjustment tool set for PSA (Peugeot / Citroen). Contains important tools for locking the flywheel, locking the crankshaft, locking the camshaft, locking the injection pump shaft, removing the crankshaft pulley, tensioning the toothed belt. Suitable for petrol engines: 1.9l - 1.1l - 1.4l - 1.6l - 1.8l - 1.9l - 2.0l. 1.6l - 1.8l - 2.0l - 2.2l 16V (turbo and double camshaft). Diesel engines: 1.4l - 1.5l - 1.7l - 1.8l - 1.9l - 2.1l - 2.5l D / TD / TDI. 1.4l - 1.6l - 2.0l - 2.2l HDI. Also suitable for identical engines from Fiat, Ford, Nissan, Renault, Rover, Toyota etc. Engine Codes: 1KRFE, 1NDTV, 2WZTV, 3FY, 3FZ, 4HK, 4HL, 4HN, 4HP, 4HR, 4HS, 4HT, 4HW, 4HX, 4HY, 4HZ, 6FY, 6FZ, 8HX, 8HY, 9HX, 9HY, 9HZ, A9A, BDY, BDZ, BFZ, CDY, CDZ, D4164T, D6A, D6B, D6D, D8B, D8C, D9B, DDZ, DFZ, DHX, DJ5, DJ5T, DJ5TED, DJY, DKATE, DKZ, DKZDFZ, DV4TD, DV4TED4, DV6ATED4, DV6TED4, DW8, DW8B, DW10ATD, DW10ATED, DW10ATED4, DW10BTED, DW10BTED/L3, DW10CTED4, DW10JATED4, DW10TD. DW10UTD, DW12ATED, DW12ATEDL/L4, DW12BTED4, DW12CTED4, DW12MTED4, DW12TED4/L4, DW12UTED, EW10A, EW10ABE4, EW10D, EW10J4, EW10J4D, EW10J4S, EW10L4, EW10L5, EW12J4, EW12L4, EW12L5, EW7A, EW7J4, EW7JP4, F6JA, F6JB, F6JC, F6JD, G8DA, G8DB, G8DC, G8DD, G8DE, G8DF, GPDA, GPDB, GPDC, HDY, HHDA, HHDB, HHJA, HHJB, HHJC, HHJD, HHJE, HHJF, K9A, KDX, KDY, KFW, KFX, KFZ, L6A, LFX, LFY, LFZ, MTDA, NFT, NFU, NFV, NFW, NFX, NFY, NFZ, P8A, P8B, P9A, PHZ, RDZ, RFH, RFJ, RFK, RFL, RFN, RFR, RFS, RFT, RFU, RFV, RFW, RFX, RFY, RFZ, RGX, RGY, RHA, RHE, RHF, RHG, RHH, RHJ, RHK, RHM, RHR, RHS, RHT, RHV, RHW, RHX, RHY, RHZ, RLZ, T8A, T9A, THX, THY, THZ, TU1, TU3, TU5J4, TU5JP, TU5L3, TU9, TUD3, TUD5, TZJB, UBJA, VJX, VJY, VJZ, WJY, WJZ, XU10J2, XU10J4, XU5, XU7, XU7JP4, XU9, XUD11A, XUD11ATE, XUD11BTE, XUD7, XUD7TE, XUD9A, XUD9AU, XUD9AY, XUD9BTF, XUD9TE, XUD9TFL, XUD9TFY, XUD9UTF, Y6.

Citroen & Peugeot Timing Set

£110.81 Ex. VAT
Designed for setting and adjusting the timing on Citroen and Peugeot 16 valve engines (1.8 and 2.0L). Applications: 1.9D, 2.0D, 2.2D found in Citroen, Peugeot, Fiat and Toyota. Engine Codes: DW8, DW10, DW12, XUD, TUD, XU, TU. Included: Fuel injection pump shaft. Timing belt tensioner. Flywheel. Crankshaft. Camshaft. Belt pulley.

Citroen & Peugeot Timing Tool Set 1.8, 2.0, 2.2 EW7, EW10, EW12 Petrol

£133.03 Ex. VAT
For EW coded PSA engine used on Citroen and Peugeot.- 1.8, 2.0, 2.2 EW7, EW10, EW12 Petrol.

Connector Removal Tool VAG & Porsche

£44.44 Ex. VAT
For the removal of VAG & Porsche connectors. Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc. Fits directly onto the push and pull connector. Great Time Saver.

DCI Timing Set (Renault)

£110.81 Ex. VAT
This kit has be designed to allows the correct timing to be made to Renault Clio 1.5 (K9K), 1.9 (F9Q) and 2.3/2.5 dCi G9 engines used in Laguna II, Espace, Trafic and Master plus 2.2 dTi, engine codes G9T 720 in Vauxhall Movano 2.2 TDI plus a variety of other vehicles. Engine Codes: G9U, K9K, F9Q, G9T (2002-2009) plus many others. OEM Tools: MOT 1489, 1054, 1430, 1453, 1538, 1536, 1537, 1534. Applications: Dacia. Duster, 2010 - 14. Logan, 2005 - 13. Logan II, 2013 - 15. Sandero, 2008 - 13. Sandero II, 2013 - 15. Nissan 1.5 dCi, 1.9 dC, 2.2 dCi, 2.5 dCi. Juke, 2010 - 15. Kubistar, 2003 - 09. Micra, 2003 - 10. Note, 2006 - 13. NV200, 2009 - 15. Primera, 2003 - 07. Qashqai, (J10) 2007 - 14. Qashqai, (J11) 2014 - 15. Tiida, 2007 - 11. Interstar, 2002 - 11. Primastar, 2002 - 12. Renault 1.5 dCi, 1.9 dCi, 2.2 dCi, 2.5 dCi. Captur, 2013 - 15. Clio II/Clio Campus/Clio Storia, 2001 - 11. Clio III/ Clio Collection, 2005 - 13. Clio IV, 2012 - 15. Espace/Grand Espace, 1999 - 02. Espace/Grand Espace IV, 2002 - 09. Fluence, 2009 - 15. Kangoo, 2000 - 09. Kangoo II/Be Bop, 2008 - 13. Laguna, 1999 - 01. Laguna II, 2001 - 07. Laguna III, 2007 - 15. Logan/ Logan MCV, 2006 - 11. Megane, 1997 - 03. Megane II, 2002 - 08. Megane III, 2008 - 15. Modus, 2004 - 08. Modus/Grand Modus II, 2008 - 13. Scenic, 1999 - 03. Scenic/Grand Scenic II, 2003 - 09. Scenic/Grand Scenic III, 2009 - 15. Twingo II, 2007 - 14. Vel Satis, 2000 - 09. Trafic II, 2001 - 12. Master II, 2000 - 11. Suzuki 1.5 DDiS, 1.9 DDiS. Grand Vitara 2005 - 15. Jimny 2003 - 11. Opel/Vauxhall. Movano 2000 - 10. Vivaro 2002 - 12.

Diesel Camshaft/Head Rebuild Kit – VAG & Porsche

£445.95 Ex. VAT
For fitting camshafts in cylinder head. Applications: Audi A4 2001>, Audi A6 2005>, Audi A8 2003>6-cyl. TDI Common Rail 2.7L and 3.0L 4-valve engine 8-cyl. TDI Common Rail 4.0L 4-valve engine. Porsche. Skoda: Roomster, Fabia, Praktik, Octavia, Yeti, Superb. Audi: A1, A3, A4, A5, Q5, A6, TT. VW: Jetta, Touran, Golf, Golf Plus, Polo, Passat, Tiguan, Scirocco. Seat: Exeo, Leon, Altea, Toledo, Ibiza. Engine: 1.2 TDI CR, 1.6 D TDI CR, 2.0 D TDI CR. Engine Codes: CAGA, CAGB, CAGC, CAHA, CAHB, CFHC, CBAA, CBAB, CFFB, CGLA, CGLB, CJCA, CJCB, CAAA, CBAC, CBBA, CBBB, CBDA, CBDB, CBDC, CCHA, CEGA, CJAA, CAAB, CAAC, CJFA, CFWA, CAYB, CAYC, CAYA. OEM Ref: T40094, T40095, T40096.

Diesel engine locking Set

£133.03 Ex. VAT
Body dents can now easily be removed by working the sliding hammer. 3 replaceable strainers: Ø 70mm, Ø 100 mm, Ø 125mm.

Diesel Engine Setting Locking Tool Kit For Vauxhall/Opel, Saab, Fiat, 1.9, CDTi/Tid/TTid, 2.0D, CDTi Belt Drive

£99.84 Ex. VAT
The tool has been designed for setting the timing on Vauxhall, Saab, Fiat 1.9 CDTi, TiD, TTid and 2.0l D CDTi belt drive engines. Applications: Vauxhall/Opel: Astra-H (04-11), Astra-J (10-12), Insignia (08-12), Signum (04-08), Vectra-C (04-08), Zafira-B (05-12). Saab: 9-3 (04-10), 9-5 (05-10). OEM Tools: EN-46788/32 025 009, EN-46789, 32 025 008, KM-6349/87 92 335. Engine Codes: Z19DT, Z19DTH, Z19DTJ, Z19DTL, Z19DT, Z19DTH, Z19DTR, A19DTR, Z19DTR, LBQ/A20DTL, LBR/A20DT, LBS/A20DTH, LBX/A20DTJ, LBY/A20DTR, LCD/A20DTC, LBS/A20DTH, LBY/A20DTR

Diesel Engine Setting-Locking Tool Set For BMW B37 B47 Diesel

£124.95 Ex. VAT
Engine Timing Tool Kit for BMW 1.5 B37 & 2.0 B47 Diesel Engines Kit includes the essential tools required to check and set the camshaft and crankshaft timing on 2014 onwards BMW / MINI 1.5L 3 cylinder, B37 & 2.0L 4 cylinder, and B47 diesel engines. Designed to be used in accordance with OEM instructions. Contents: Tensioner pulley locking pin. Camshaft alignment tool. HP pump sprocket removal tool. Crankshaft holding tool. A/T drive plate timing pin adaptor. Flywheel drive plate timing pin. Series/chassis: F10 / F11 / F15 / F20 / F21 / F22 / F23 / F25 / F26 / F30 / F31 / F32 / F33 / F34 / F36 / F45 / F48 / F54 / F55 / F56 / F57. Engines: B37C15A / B37D15A / B47C20A / B47C20B / B47D20A / B47D20B. EQUIVALENT TO BMW PART NUMBERS: 114120 - 11 4 120. 2347904 - 2 347 904. 2365488 - 2 365 488. 2288380 - 2 288 380. 118760 - 11 8 760. 118740 - 11 8 740. 118030 - 11 8 030.

Diesel Engine Setting-Locking Tool Set For BMW N47-57, 2.0-3.0 ltr Chain Drive

£88.59 Ex. VAT
For mounting of the camshaft, replacing the timing chain, and cylinder head gasket. Suitable for the following applications: 116d 118d 120d 123d, type E81 E82 E87 E88 F20. 316d 318d 320d 325d 330d type E90 E91 E92 E93 F30. 520d 525d 530d 530d GT 535d 535d GT M550d,. type E60 E61 F07 F10 F11. 640d type F12. 730d 740d 750d, type F01. X1 1.8d 2.0d 2.3d, type E84. X3 1.8d 2.0d 3.0d, 3.5d type E83 F25. X5 3.0d 4.0d M5.0d, type E70. X6 3.0d 4.0d M5.0d, type E71.

Diesel Engine Setting-Locking Tool Set For Renault-Nissan 1.5-1.9dci, Suzuki DDis, Dacia Dci Belt Driven

£8.72 Ex. VAT
Designed to remove the timing belt quickly. Suitable for Renault Laguna, Clio and Kangoo with 1.5 and 1.9 DCI engines. Crankshaft locking pin should be used as OEM: MOT 1489. Camshaft / crankshaft timing pin to use as OEM 0194B, 999-7122, 21-263, MOT 1430, 0187B, 0189B. TDC Timing Pin to to use as: KM603 OEM, MOT 1054 MOT 861 MOT 863.

Diesel Engine Setting/Locking Tool Kit – Land Rover & Jaguar TDV8 3.6 – Chain Drive

£254.81 Ex. VAT
Setting and Locking kit for Range Rover L320 and L322 V8 3.6D. Kit includes a flywheel locking plate and camshaft rotating pin.

Diesel Engine Timing And Injection Pump Tool Kit For Ford Durotorq” 2.0

£99.84 Ex. VAT
This kit has been designed for setting and adjusting the timing on Ford models with 2.0 and 2.4 16v TDCi engines. Applications: Mondeo, Transit ('01-'04) etc. Engine Codes: FMBA / B, D5BA, ABFA, D3FA, F3FA, D2FA, D4FA, F4FA. This kit is especially needed when making chain changes, engine repairs and work on the injection pump.

Diesel Engine Timing Tool Set for Fiat, Ford, Opel, Suzuki 1.3 Diesel

£155.25 Ex. VAT
Designed for checking and adjusting the engine timing on a wide range of common vehicles including: Fiat: Punto 1.3 JTD Multi-Jet 188A9.000, manufactured between 2003 and 2007. Panda 1.3 JTD Multi-Jet 169A1.000, 188A8.000, manufactured between 2003 and 2009. Idea 1.3 JTD Multi-Jet 199A3.000, 188A9.000, manufactured between 2004 and 2006. Doblo 1.3 JTD Multi-Jet 188A9.000, manufactured between 2004 and 2006. Doblo Cargo 1.3 JTD 188A9.000, manufactured between 2004 and 2006. Opel/Vauxhall: Agila 1.3 CDTi Z13DT, manufactured between 2003 and 2008. Corsa-C 1.3 CDTi Z13DT, manufactured between 2003 and 2007. Combo-C 1.3 CDTi Z13DT, manufactured between 2003 and 2009. Corsa-D 1.3 CDTi Z13DTH, Z13DTJ, manufactured between 2006 and 2009. Astra-H 1.3 CDTi Z13DTH, manufactured between 2004 and 2009. Tigre-B 1.3 CDTi Z13DT, manufactured between 2004 and 2009. Meriva 1.3 CDTi Z13DT, Z13DTJ, manufactured between 2004 and 2009. Suzuki: Ignis 1.3 CDTi Z13DT, manufactured between 2003 and 2009. Wagon 1.3 CDTi Z13DT, manufactured between 2003 and 2009. Swift 1.3 CDTi Z13DT, manufactured between 2003 and 2010. Ford: Ka 1.3 TDCi. Includes the following tools: Counter holding tool for crankshaft pulley, to be used as Fiat Ford OEM 1871000200 - Ford OEM 303-1469 - Opel/Vauxhall OEM KM-662-C. Crankshaft adjustment tool, to be used as Opel (Vauxhall) OEM EN 46785 OEM KM 955, Suzuki 09912-38300. Camshaft adjustment tool, to be used as Fiat OEM 1871000900 / 1860985000 - Ford OEM 303-1472, Opel (Vauxhall) OEM EN 46781 - Suzuki OEM 09917-68610. Chain tensioning lever, to be used as Fiat OEM 1870900400. Crankshaft locking tool, to be used as Fiat OEM 1870900300 - Ford OEM 303-1468. Camshaft adjustment tool, Fiat 8mm.

Diesel Injection Fuel Pump Puller BMW

£44.44 Ex. VAT
To be used on 2.5 TDS engines in BMW (E34, E36, E38), Land Rover, Vauxhall/Opel. BMW OEM: 13-5-120. Land Rover OEM: LRT12-119. Vauxhall/Opel OEM: KM 825.