This is a must-have piece of kit for anyone working on a vehicle when plasma cutting or welding. You will save huge amounts of time as it allows the battery to be kept installed in the vehicle. Prevents damage to sensitive electronics from voltage spikes. Recommended to be used before any work on the vehicle. Battery clips are heavy duty and fully insulated. Housed in a hard wearing and durable case. Complete with indicators to show for faults.
Suitable for a wide variety of vehicles from all markets including Europe, America and Japan. 2x LED test adapter, for testing voltage and ground signals, example: Hall sensors, injectors, solenoid valves, etc. 48x test adapter with flat plug / flat sockets, sizes 0.7 - 0.8 - 1.2 - 2.0 - 2.5 - 3.0 - 5.0 - 6.0mm. 24x test adapter with round plugs / round sockets, sizes 1.5 - 2.0 - 3.5 - 4.0mm. 2x SRS air bag simulator for electrical simulation of air bag and belt tensioner generators. 2x potentiometer (5KOhm), to simulate temperature and throttle position sensors. 4x test leads with banana plugs on both sides, stackable. 2x 1-to-2 connector. 2x alligator clips. 4x acicular probe. 2x probes.
Designed to help find the location of problematic noises quickly, reducing the diagnostic time. 1 way amplifier allows for a quick and simple method of testing. Can be used on many parts of the engine including the alternator etc. Includes 6 way amplifier and colour coded probes. Alligator clips allows for use on various test points. Padded headset and band gives extra comfort for when working for extended period of time.
Measure a wide range of automotive components for temperature and electrical specs including: Voltage measurement range: 0-70V. DC Current measurement range: 0-5A DC. Frequency measurement range: 0-300 KHZ (Square Wave). Resistance measurement range: 0-200. Measured Temperature range: 5-200C / 41-392F. Illuminated Colour Screen Display. Supply voltage: 8-30v DC. Cable length: 2m. Includes: Power clips suitable for car batteries. Cigarette lighter plug. Auxiliary ground connector. Adaptor connector. Standard Probe. Long testing probe. Wire piercing probe.
This compression tester can be quickly set to your bike / car, then you can get accurate readings in valves, piston rings, cylinder bores or head gaskets. Manometer with double graduation ( 0 to 300 psi, 0- 21 kg / cm 2 ) and with rubber protection to prevent scratches. Drain valve with full copper nickel plating, anti -oxidation and corrosion. 4 Adapters: M10x1.0mm, M12x1.25mm, M14x1.25mm, M18X1.5mm. M12, M14, M18 adapters are suitable for car. M10 adapter is suitable for motorcycles. Pressure gauge with rubber protection. Angled pressure tube length: 160mm. Pressure gauge Diameter: 75mm. Test pressure: max 21 bar / 300 psi. Pressure tube length: 150mm. Hose Overall length: 430mm. Case Size: 265 x 210 x 65mm.
This tool measures the strength of AdBlue®, screen wash, battery fluid & antifreeze by measuring the refractive index of light passing through the mixture solution. Suitable for artificial antifreeze mixtures featuring G13, aqueous/urea contents of AdBlue® & long life OAT (Organic Acid Technology). Temperature corrected prism ensures accurate readings. To calibrate use water. Eyepiece with adjustable focus. Comes with pipette & storage box.