Showing all 19 results

3-Piece Swivel Ratchet Set;Extendable 72-Tooth

£140.57 Ex. VAT
special 270° Swivel Head Ratchets: These specially designed ratchets have a swivel head feature which allows the head to move 270 degrees which conveniently improves access whilst working in restricted areas. Quick Extendible Length Feature: These ratchets can also extend to different lengths quick & easily, adding more convenience & practicality during use in difficult & space restricted areas. 72 Tooth Reversible Ratcheting Mechanism: Can be used to tighten and loosen nuts & bolts easily with 72 teeth to work in 5 degree steps.

5-Piece Oil Filter Swivel Wrench Set

£49.95 Ex. VAT
Specially Designed Swivel oil flter wrench and 12" adjustable oil filter pliers. Non Slip Handles Ergonomic handles for a firm and comfortable grip. Sizes Included 68.85mm-82.55mm. 88.9mm-95.25mm. 101.6mm-114.3mm. 120.65mm-133.35mm. 12" adjustable oil filter pliers 64mm-116mm. Ideal For Narrow areas that are difficult to access.

Double-Joint Ratchet Combination Wrench Set 8-19 mm

£134.95 Ex. VAT
180° step-less, swivelling ratchet ring head. Fine toothed with 72 teeth. Actuation angle: 5°. Long Lasting Made from chrome vanadium steel. Ideal For hard-to-reach working areas in confined spaces and low-lying screw connections. Sizes Included 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19mm.

Impact Power Hand Impact Wrench

£54.28 Ex. VAT
Allows access to restricted areas under the bonnet. Will work where normal air impact wrenches wont fit such as under the bonnet. 1/2'' push through. 600ft/lb Torque.

Torque Multiplier Set Ford 1.0 EcoBoost

£345.00 Ex. VAT
This torque multiplier set allows the correct mounting position and correct tightening sequence to be applied to the crankshaft pulley bolts. The torque multiplier has a gear ratio of 5.1 The tool is mandatory when working on the following Ford engines: 1.0 EcoBoost, 1.0 Duratec, 1.1 Duratec, 2.0 Duratorq-TDCi, 2.0 EcoBlue Diesel. OEM: 303-1611, 303-1611-01, 303-1611-02. Models: Ford B-Max (2012-2018). Ford C-Max (2012-2018). Ford Grand C-Max (2017-2018). Ford EcoSport (2015-2019). Ford Fiesta (2012-2019). Ford Focus (2012-2018). Ford Mondeo (2015-2018). Ford Transit Courier (2014-2020). Ford Transit Connect (2013-2018). Ford Grand Tourneo Connect (2013-2018). Ford Tourneo Courier (2014-2020). Engine Codes: M1DA, M1DD, M1JA, M1JC, M1JE, M1JH, M1JJ, M1CA, M1CB, M2DA, M2DB, M2DC, M2GA, M2GB, P4JA, P4JB, P4JC, P4JD, SFCA, SFCB, SFCC, SFCD, SFDB, SFJA, SFJB, SFJC, SFJD, XMJA, XMJB, XMJC, XMJD, YYJA, YYJB.

Torque Wrench ”Werkstad” 1”DR 200-1000Nm

£664.31 Ex. VAT
Reversible ratchet with automatic release via ''click signal''. Torque adjustable by stopping device. Delivered with calibration certificate. Overall length: 1195mm. High precision.

Torque Wrench ”Werkstad” 1/2”DR 40-210Nm

£110.81 Ex. VAT
Reversible ratchet with automatic release via click signal. Torque adjustable by stopping device. Delivered with calibration certificate. Overall Length: 460.8mm.

Torque Wrench ”Werkstad” 1/2”DR 50-350Nm

£133.03 Ex. VAT
Reversible ratchet with automatic release via click signal. Torque adjustable by stopping device. Delivered with calibration certificate. Overall Length: 522.6mm.

Torque Wrench ”Werkstad” 3/4”DR 100-500Nm

£360.28 Ex. VAT
Reversible ratchet with automatic release via click signal. Torque adjustable by stopping device. Delivered with calibration certificate. Overall length: 840mm.

Torque Wrench ”Werkstad” 3/4”DR 150-800Nm

£553.50 Ex. VAT
Reversible ratchet with automatic release via ''click signal''. Torque adjustable by stopping device. Delivered with calibration certificate. Overall length: 1195mm. High precision.

Torque Wrench ”Werkstad” 3/8”DR 20-110Nm

£110.81 Ex. VAT
Reversible ratchet with automatic release via click signal. Torque adjustable by stopping device. Delivered with calibration certificate. Overall Length: 361mm.

Torque Wrench 1/2”dr 40-200NM Digital With Angle Settings

£221.63 Ex. VAT
Professional workshop grade torque wrench suitable for daily use. Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels. Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited. Space for up to 5 user presets. Reversible with 72tooth ratchet. Supplied with test certificate. Torque: 40 - 200 Nm. Length: 650mm. Drive 1/2''. Angle Range 0-360?. Accuracy: /- 2%. Resolution: 0.1Nm?(0.1lb-ft). Preset: 10. Memory (Torque): 100(10memory for each preset). Memory (Angle): 50. Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m). Mode: Trace / Peak. Indicators: LED?& Buzzer. Battery 3pcs * AAA. Auto shut off: 60seconds. Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F). Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F). Operating relative humidity: 15-90% noncondensing.

Torque Wrench 1/2”dr 68-340NM Digital With Angle Settings

£288.00 Ex. VAT
Professional workshop grade torque wrench suitable for daily use. Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels. Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited. Space for up to 5 user presets. Reversible with 72tooth ratchet. Supplied with test certificate. Torque: 68 - 340 Nm. Length: 650mm. Drive 1/2''. Angle Range 0-360?. Accuracy: /- 2%. Resolution: 0.1Nm?(0.1lb-ft). Preset: 10. Memory (Torque): 100(10memory for each preset). Memory (Angle): 50. Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m). Mode: Trace / Peak. Indicators: LED?& Buzzer. Battery 3pcs * AAA. Auto shut off: 60seconds. Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F). Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F). Operating relative humidity: 15-90% noncondensing.

Torque Wrench 3/8”dr 20-100NM Digital With Angle Settings

£217.69 Ex. VAT
Professional workshop grade torque wrench suitable for daily use. Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels. Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited. Space for up to 5 user presets. Reversible with 72tooth ratchet. Supplied with test certificate. Torque: 20 - 100 Nm. Length: 405mm. Drive 3/8''. Angle Range 0-360?. Accuracy: /- 2%. Resolution: 0.1Nm?(0.1lb-ft). Preset: 10. Memory (Torque): 100(10memory for each preset). Memory (Angle): 50. Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m). Mode: Trace / Peak. Indicators: LED?& Buzzer. Battery 3pcs * AAA. Auto shut off: 60seconds. Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F). Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F). Operating relative humidity: 15-90% noncondensing.

Torque Wrench 3/8”dr 27-135NM Digital With Angle Settings

£217.69 Ex. VAT
Professional workshop grade torque wrench suitable for daily use. Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels. Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited. Space for up to 5 user presets. Reversible with 72tooth ratchet. Supplied with test certificate. Torque: 27 - 135 Nm. Length: 405mm. Drive 3/8''. Angle Range 0-360?. Accuracy: /- 2%. Resolution: 0.1Nm?(0.1lb-ft). Preset: 10. Memory (Torque): 100(10memory for each preset). Memory (Angle): 50. Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m). Mode: Trace / Peak. Indicators: LED?& Buzzer. Battery 3pcs * AAA. Auto shut off: 60seconds. Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F). Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F). Operating relative humidity: 15-90% noncondensing.

Torsion Socket Set; 110nm, 17, 19, 21mm, 1/2”dr

£88.59 Ex. VAT
Torsion sockets which allow torque of up to 80ft lbs (108Nm) when used with an air impact wrench. Prevents the over tightening of wheel nuts. Manufactured from Chrome Molybdenum. Profile: 6-Point. *Please note always use a Torque Wrench to check the torque*. Sizes: 60076-17-WW 17mm. 60076-19-WW 19mm. 60076-21-WW 21mm.

Vibro-Force Spindle

£114.95 Ex. VAT
Specially designed to be used with a high-Torque Impact gun to generate a combination of high pressing force and impact shock. To be used in conjunction with Hub Puller plates (example: Welzh 1017-2-WW, 1017-XLBASE-WW). Material: Cr-Mo. Specs: 35X200l.