21-Piece Extra Large Mounting Press Set
52-Piece Mounting Press Set
Bearing Install and Removal Tool Kit; Universal, 23pcs
Bearing Mounting Press Set; 52pcs
Bearing Puller for Blind Hole Bearings; 5-Piece
Bearing Separator Kit; 14-Piece
Bearing Separator Kit; 5pcs, 6.35 to 228.6mm
The Welzh bearing separator kit contains the most popular sizes needed for the automotive and workshop sector, also included is a pulley pulling attachment.
Bearing separator 60.452mm maximum spread and 16.129mm minimum spread.
Bearing separator 129.032mm maximum spread and 50.8mm minimum spread.
Bearing separator 228.6mm maximum spread and 25.4mm minimum spread.
Bearing separator 258.064mm maximum spread and 32.258mm minimum spread.
Pulley pulling attachment with a 127mm maximum and 25.4mm minimum spread.
Bearing Tool Kit; Universal, 31-Piece
Hub Arbieterâ„¢
For use on all new Generation 2 & 3 Hub-Bearing Units.
Allows the hub to be removed even when severely corroded.
Universal use on most wheel bearings allows disassembly and assembly of the wheel hub and the wheel bearings.
Includes pressure plates with diameters of: 50, 55, 59, 63.3, 66.6, 70.3, 71.5, 73.1, 73.4, 74.8, 77.5.
Simply Bolt to the wheel hub then power strike with a hammer allowing the hub to break free.
These new Generation Bearings are widely used on the most todays most popular cars: VAG, LandRover, Ford, Mazda, Volvo, Kia etc (particularly Vauxhall/Opel Insignia rear wheels).
Hub Puller (LGV) & 12 Ton Ram
This set comes complete with a 12 ton hydraulic ram suitable for any task you will come across.
Can be used on hubs with 4, 5, and 6 holes.
Pin Hole Max. Outer Range: 137-175mm.
Universal hole alignment system.
For wheel bolts up to M14.Applications:
Citroen: Jump Dispatch, Jumper and Relay.
Fiat: Ducato Iveco Daily 2, Daily 3.
Mercedes-Benz: Sprinter, Vito.
Vauxhall: Movano, Vivaro.
Peugeot: Boxer, Expert.
Renault: Master, Trafic.
Ford: Transit.
LDV: Maxus.
Hub Puller (XL)
Hub Puller & 12 Ton Ram
12-ton hydraulic ram (4148-WW).
Especially for glued and rusty drive shafts.
Fits on 4 and 5-hole hubs with hole circle diameter of 98 to 125mm.
For wheel bolt up to M14.
For SUVs and light trucks.
Spindle can be turned by hand or ratchet.
Pin Hole Max. Outer Range: 87-137mm.
Universal hole alignment system.
For wheel bolts up to M14.
Hub Puller & Heavy Duty Slide Hammer
Press and Pull Sleeve Kit; 24-Pieces
Specially Designed:
Universal Press & Pull Sleeve tool is designed for removing & installation of silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.
Various Applications:
This set is ideal for different vehicle classes such as Cars, SUV, Vans & can be used with spindles & hydraulic workshop presses.
20 Pressure Sleeves with Control Cut-Out:
Inside Diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72mm.
Outside Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82mm.
4x Ballbearing Spindles: M10, 12, 14, 16.