Showing all 8 results

8-piece Induction Coil Set for Induction Heater

£210.38 Ex. VAT
For heating of screws, nuts, shafts, etc. Straight type. Wire diameter: 4mm. Coil hight: approx. 23mm. Overall length: approx. 220mm. Includes coils with internal diameters: 15, 19, 20, 23, 27, 33, 39, 47mm.

8-piece Induction Coil Set, Flat Type, for Induction Heater

£134.31 Ex. VAT
For heating of screws, nuts, shafts, etc. 90° angled type. Wire diameter: 4mm. Coil hight: approx. 23mm. Overall length: approx. 230mm. Includes coils with internal diameters: 15, 19, 20, 23, 27, 33, 39, 47mm.

Induction Heater Kit EU Plug

£758.81 Ex. VAT
Flameless rapid heat conduction reduces the risk of accidents & potential damage. Reduces damaging the bolt and material around the equipment. Can reach up to 500 degrees centigrade within a minute. 1 x 18mm coil(diameter of bore) (Length 20cm). 1 x 22mm coil(diameter of bore) (Length 20cm). 1 x 28mm coil(diameter of bore) (Length 20cm). 1 x 1.1m Flexible Soft Coil. EU Plug Version.

Induction Heater Kit EU Plug 2

£969.19 Ex. VAT
Principle of operation: There is an alternating magnetic field. The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up. Allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch. Within the shortest possible time, e.g. rusty nuts are heated and can be loosened. Using for e.g. ball joint pinch bolts and other items on axle and engine. Also for heating components such as bearings. Includes the following induction coils: Inductive coil 19 mm, 220 mm long (for Ø 10-16 mm). Induction coil 27 mm, 220 mm long (for Ø 17-24 mm). Induction coil 50 mm, 235 mm length (for heating small surfaces). Formless coil, 780 mm, for heating of components (bearings, etc.). Power supply: ~230V (50-60Hz). Current: 7.5 Amps. Max. power: 1.5 kw. Protection class IP20. Dimensions: 200 x 140 x 75mm. Weight 4.5 Kg.

Induction Heater Kit UK Plug

£758.81 Ex. VAT
The best way to loosen stuck bolts and parts without the need to cut or drill. Flameless rapid heat induction reduces the risk of accidents & potential damage. Reduces damaging the bolt and material around the equipment. Can reach up to 500 degrees centigrade within a minute. 1 x 18mm coil(diameter of bore) (Length 20cm). 1 x 22mm coil(diameter of bore) (Length 20cm). 1 x 28mm coil(diameter of bore) (Length 20cm). 1 x 1.1m Flexible Soft Coil. UK Plug Version.

Induction Heater Kit UK Plug 2

£969.19 Ex. VAT
Principle of operation: There is an alternating magnetic field. The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up. Allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch. Within the shortest possible time, e.g. rusty nuts are heated and can be loosened. Using for e.g. ball joint pinch bolts and other items on axle and engine. Also for heating components such as bearings. Includes the following induction coils: Inductive coil 19 mm, 220 mm long (for Ø 10-16 mm). Induction coil 27 mm, 220 mm long (for Ø 17-24 mm). Induction coil 50 mm, 235 mm length (for heating small surfaces). Formless coil, 780 mm, for heating of components (bearings, etc.). Power supply: ~230V (50-60Hz). Current: 7.5 Amps. Max. power: 1.5 kw. Protection class IP20. Dimensions: 200 x 140 x 75mm. Weight 4.5 Kg.

Induction Mate

£555.00 Ex. VAT
Induction Mate™'s Flameless Technology This induction heater is ideal for bolt removal. Usually during machine repair old bolts & nuts can get stuck & are extremely difficult to remove. The specially designed Induction Mate makes a tough job easy compared to the traditional method using dangerous flames. 30 Second Super Fast Heat Up The Induction Mate™ is extremely reliable and saves time, with its 30 second heating up time, allowing to get the job done in half the time. Bright LED Lighting Designed with LED Light to improve visibility during the job or also great for use within confined areas where its harder to locate the bolt. Multiple Coils Included Various sized coils to suit different bolt sizes, 18mm, 22mm, 28mm in diameter and all with a length of 20cm. Flexible soft coil also included,1 meter long. Time Saving Rotating Locking Feature The Induction Mate™ has a specific feature which allows the user to replace the coil quickly then easily locking it into place by twisting the red rotating lock. To unlock it simply rotate the locking function back to release the coil. Handle Locking Feature Provides the option to remove the handle for flexibility and ease of use. Other Specifications Input Voltage: 220V 50/60Hz. Input Current: 4A. Output Power: 500-900W. Output Voltage: 40V. Output Current: 180A.

Induction Rope Wire for Induction Heater

£44.44 Ex. VAT
For heating flanges, bearing housing, shafts, gears, exhaust connections, etc. Malleable, therefore universal application. Wire diameter: 4mm. Wire length: 800mm.