2-Ton Pneumatic Jack (Extended)
Automotive Mini Utility Under Car Hoist Stand
Bottle Jack, Heavy Duty 20-Ton Air Hydraulic And Air
Bottle Jack; Hydraulic, 20 Ton
Bottle Jack; Stubby, Air & Hydraulic, 20T
Designed for operating either manually or pneumatically.
Heavy-duty steel construction meets ANSI standards.
Air hose can swivel in any direction.
Fitted with safety valve to prevent overloading.
Two-piece handle allows for easy pumping.
Extension screw gives added height when necessary.
Double spring return.
Min. height: 10 3/16in.
Max. height: 19 7/8in.
Available air pressure: 80 PSI to 120PSI.
20 ton lifting capacity.
EV Battery Lifting Table
Hub Mate™ Jack-Mounted Hub Supporter
Designed for supporting Control Arm, Universal application.
The HubMate™ Supporting Adaptor is used in conjunction with a transmission jack.
The support takes place via the wheel hub ensuring the correct raising and lowering of control arms/axles to specified positions.
Very effective when applied to removal and installation of suspension struts.
Inner Diameter: 30mm.
Hydraulic Car Dolly Jack
Allows for the easy moving of damaged Vehicles.
Load capacity 680 kg per jack.
Tire width up to max. 295mm.
Ground clearance: 150mm.
Max. lifting roll distance: 550 mm (extended).
Min. lifting roll distance: 270 mm (retracted).
Dimensions (retracted): 345 x 630mm.
Dimensions (extended): 800 x 630mm.
Available separately:
7081-1-WW: Replacement Hydraulics.
7081-2-WW: Replacement Wheel.
Hydraulic Car Dolly Jack
Allows for the easy moving of damaged Vehicles.
Load capacity 680 kg per jack.
Tire width up to max. 295mm.
Ground clearance: 150mm.
Max. lifting roll distance: 550 mm (extended).
Min. lifting roll distance: 270 mm (retracted).
Dimensions (retracted): 345 x 630mm.
Dimensions (extended): 800 x 630mm.
Available separately:
7081-1-WW: Replacement Hydraulics.
7081-2-WW: Replacement Wheel.
Pneumatic Balloon Jack-Mate™ 3-Tier Long Handled 2000kg
Pneumatic Balloon Jack-Mate™ 3-Tier Stubby Handled 2000kg
Swivel Base For Transmission Jack
Transmission Jack 500kg; Telescopic Vertical
For assembling and disassembling engines, gearboxes, and rear axles.
Adjustable head plate 60 mm to the side and from -10° to 35° in inclination, therefore especially suitable for mounting of automatic transmissions.
Height approx. 880 to 1770mm.
4 ball bearing caster wheels.
Compact construction, lightweight.
High lifting range.
Fast lifting due to hydraulic foot pedal.