Compact Wheel Bearing Kit; 82mm GEN2
Compact Wheel Bearing Kit; 85mm GEN2
The GEN 2 type of wheel bearing is predominantly fitted to models from VW Group.
Includes a variety of different diameter tool kits covering a range of sizes to suit the different.
GEN2 bearings used by vehicle manufacturers.
Designed to distribute pressing force evenly through the outer bearing race and also allows for.
the suspension leg to remain in-situ on the vehicle when fitting new bearings.
GEN2 Bearing Removal Combination Tool Kit: 62 / 66 / 72 / 85mm.
Combination Kit for Audi / Seat / Skoda / VW applications.
Consists of all necessary parts from the 62, 66, 72, 78, 82 & 85mm kits.
62mm Kit - Audi A2, VW Lupo (Front).
66mm Kit - Skoda Fabia, VW Fox (Front), Polo.
72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front).
85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear).
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 90mm GEN2
Compact Wheel Bearing Kit; Ford Transit, GEN2
Compact Wheel Bearing Set 72mm GEN2
Hub Arbieterâ„¢
For use on all new Generation 2 & 3 Hub-Bearing Units.
Allows the hub to be removed even when severely corroded.
Universal use on most wheel bearings allows disassembly and assembly of the wheel hub and the wheel bearings.
Includes pressure plates with diameters of: 50, 55, 59, 63.3, 66.6, 70.3, 71.5, 73.1, 73.4, 74.8, 77.5.
Simply Bolt to the wheel hub then power strike with a hammer allowing the hub to break free.
These new Generation Bearings are widely used on the most todays most popular cars: VAG, LandRover, Ford, Mazda, Volvo, Kia etc (particularly Vauxhall/Opel Insignia rear wheels).
Hub Puller (LGV) & 12 Ton Ram
This set comes complete with a 12 ton hydraulic ram suitable for any task you will come across.
Can be used on hubs with 4, 5, and 6 holes.
Pin Hole Max. Outer Range: 137-175mm.
Universal hole alignment system.
For wheel bolts up to M14.Applications:
Citroen: Jump Dispatch, Jumper and Relay.
Fiat: Ducato Iveco Daily 2, Daily 3.
Mercedes-Benz: Sprinter, Vito.
Vauxhall: Movano, Vivaro.
Peugeot: Boxer, Expert.
Renault: Master, Trafic.
Ford: Transit.
LDV: Maxus.
Hub Puller (XL)
Hub Puller & 12 Ton Ram
12-ton hydraulic ram (4148-WW).
Especially for glued and rusty drive shafts.
Fits on 4 and 5-hole hubs with hole circle diameter of 98 to 125mm.
For wheel bolt up to M14.
For SUVs and light trucks.
Spindle can be turned by hand or ratchet.
Pin Hole Max. Outer Range: 87-137mm.
Universal hole alignment system.
For wheel bolts up to M14.
Hub Puller & 12-Ton Hydraulic Ram + Vibro Force Spindle
Set Includes
12-ton hydraulic ram (3875-WW), hub puller (1017-2-WW) and vibro spindle (44471-WW).
Specially Designed
For seized and rusty hubs.
Various Applications
Fits on 3, 4 and 5 hole hubs with hole circle diameter of 98 to 125mm.
For wheel bolt up to M14.
For SUVs and light trucks.
Specifications
Spindle can be turned by hand or ratchet.
Vibro Spindle can be used with a high-torque impact gun to generate a combination of high pressing force and impact shock.
Pin Hole Max. Outer Range: 87-137mm.
Universal hole alignment system.
Hub Puller & Heavy Duty Slide Hammer
Master Wheel Hub & Bearing Removal,Install Kit
Time Saving
This wheel hub bearing press tool does away with the need for a shop press.
Save time removing even seized-up wheel hub and bearing assemblies as this bearing press kit allows mechanics to install wheel bearings without a shop press.
For All Wheel Hubs
This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German cars. Install wheel hubs and bearings on most vehicles easily with our wheel bearing press kit.
Simple Installation and Removal
No need to remove the strut assembly or knuckle to remove/install the hub and bearing. The hub puller tool removes/installs hubs safely from the knuckle. Wheel bearing removal kit cancels the need for an alignment after use.
Easy To Use
Service your vehicles easily with our rear and front wheel bearing removal kit. This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles - BMW, Porsche, VW, and more.
Press and Pull Sleeve Kit; 24-Pieces
Specially Designed:
Universal Press & Pull Sleeve tool is designed for removing & installation of silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.
Various Applications:
This set is ideal for different vehicle classes such as Cars, SUV, Vans & can be used with spindles & hydraulic workshop presses.
20 Pressure Sleeves with Control Cut-Out:
Inside Diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72mm.
Outside Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82mm.
4x Ballbearing Spindles: M10, 12, 14, 16.
Wheel Hub Grinding Attachment
Designed specifically to clean the wheel and hub which is prone to corrosion and wear.
With this one simple attachment the wheel/hub can be clean quickly and effectively.
Can improve the wheel balance; must have for any garage.
Can be used to remove corrosion from any surface.
Designed with premium materials for longevity.
Outer Diameter: 150mm.
Inner Diameter: 90mm.