Ford Focus & Mazda 3 Trailing Arm Bush Removal / Installer Set
This kit can also be used with Art. 4148, 12 ton hydraulic ram.
Designed to be used in situ with vehicle offering the most efficient method of completing the task.
Make Model Applications.
Ford Focus Mk I (98-07) Remove/Install.
Ford Focus Mk II (98-07) Remove/Install.
Ford Kuga (before 08) Remove/Install.
Ford C Max MPV ((07) Remove/Install.
Mazda 3 (Chassis BK 03-09) Remove/Install.
Mazda 5 (Chassis CR, CW) Remove/Install.
Volvo V50 Estate (04-12) Remove/Install.
Volvo S40 Mk II (03-12) Remove/Install.
Ford Transit Lower Arm Bush Tool For Use With 67306-WW
For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013.
Can also be used in a workshop press for lower arms when they have been removed from the vehicle.
Designed to be used with Welzh 67306-WW press frame and Hydraulic Ram 4148-WW.
On vehicle solution with minimal strip down.
OEM Bush Numbers covered: 4042024, 4372132, 4540787 & 737213.
Applications:Â Ford Transit Mk5 & Mk6 from 2000 to 2013.
Fuel Filter Removal Tool For VW Crafter & Volvos
Due to the awkward and hard to reach location of the fuel filter traditional methods are ineffectiveand this can potentially damage the filter housing which can be expensive to replace.
This tool quickly removes the filter while preventing damage to it and surrounding parts.
To be used with a 1/2'' dr Hand Ratchet.
Applications:
Volvo 4 and 5 cylinder 2.0lt and 2.4lt diesel engines, V70, XC70, S40, S60, S80, XC90, V50.
Volkswagen Crafter 2.5 TDi from 2006 to 2013.
Engine Codes:
AUH, BCQ, BJJ, BJK, BJL, BJM, CEBA, CEBB, CECA, CECB.
OEM Codes:
OEM T50011 & 999 7084.
OEM filter number 2E0 127 159.
Fuel Filter Removal Tools for Ford Transit (Custom)
Fuel Filter Removal Tools for Mercedes Benz 2.2 CDI
Due to the awkward and hard to reach location of the fuel filter traditional methods are ineffectiveand this can potentially damage the filter housing which can be expensive to replace.
This tool quickly removes the filter while preventing damage to it and surrounding parts.
Suitable for use on Mercedes Models with 2.2CDI Engines.
To be used with a 1/2'' dr Hand Ratchet.
Fuel Filter Removal Tools for PSA Group 2.2 HDi Engines
Due to the awkward and hard to reach location of the fuel filter traditional methods are ineffectiveand this can potentially damage the filter housing which can be expensive to replace.
This tool quickly removes the filter while preventing damage to it and surrounding parts.
Suitable for use on all PSA Vehicle fitted with 2.2Hdi Engines.
To be used with a 1/2'' dr Hand Ratchet.
Fuel Gauge & Pump Sender Collar Wrench
Fuel Pump Sprocket Holding Kit-for Vauxhall 1.6 CDTI
Pump Sprocket Holding Kit Helps to hold the pump sprocket in place stopping the drive chain dropping into the engine causing damage and rebuild.
Kit includes slide hammer to extract the sprocket.
New sprocket blanking will be required - OEM part number 5557422.
Applications: Vauxhall Astra (2013 - 2018), GTC (2015 - 2018), Insignia (2015 - 2018), Meriva (2013 - 2017), Mokka (2014 - 2018), Zafira (2013 - 2018).
Engine Applications: 1.6 CDTI diesel, LVK/B16DTR, LVL/B16DTH, LWQ/B16DTC, LWQ/B16DTE, LWV/B16DTU.
Equivalent to OEM EN-50885 Includes slide hammer to extract the sprocket blanking plate. New sprocket blanking plate will be required - OEM part number 5557422
Fuel Return Line Tool For VAG Group
Specially designed for the removal and installation of new style injector fuel return clips which is installed on return pipes used on VAG Group Piezo injectors. To remove the clips they must be unlocked before removal or they are prone to damage. This tool unlocks and removes them with ease.
Applications:Â Audi A3 (2008-'10), A4 (2005-'12), A5 (2009-'12), A6 (2004-'15), A7 (2012-'15), Q5 (2009-'16), Q7 (2007-'09), Volkswagen Passat (2008-'12), Phaeton (2004-'07), Scirocco (2008-'11), Tiguan (2007-'11), Transporter T5 (2009-'15), Eos (2008-'10), Golf VI Estate (2008-'10), Jetta (2009-'11), SEAT Exeo (2009-'12), Skoda Yeti (2009).
Engines Codes: 2.0 (CBAA, CBAB, CAGA, CAGB, CAGC, CBDB, CBAC, CBDC, CAAA, CAAB, CAAC, CAAD, CAAE). 2.7 (BPP). 3.0 (CDUD, BMK). 4.2 (BTR).
Fuel Tank Sender Unit Spanner Set
G-Hook
Gas Soldering Torch Kit
Gas volume 30ml, flame temperature 1300(°c).
Soldering temperature 450(°c), hot air temperature 600(°c).
Professional 3-in-1 soldering iron / torch / hot blower.
7 accessories: Chisel tip, anvil tip, at tip, deflector, solder, cleansing sponge & a cap.
Electronic application: soldering, heating and heat-shrinking.
90w-150w equivalent electrical power.
Gearless Ratcheting Calliper Press Kit
Glow Plug Removal Set for Damaged Glow Plugs
Simplifies the assembly and disassembly and professional repair of glow plug threads extractor for fixed glow plugs.
Step drill to drill out damaged glow plugs 7 x 5.5 mm and 9 x 5.5mm.
Tap for regrooving of the glow plug threads: M8 x 1.0 mm - M10 x 1.0 mm - 6.3 mm (1/4'') x 28UNF.
Holder for thread tap with ratchet function.
E-type socket E10.
Glow Plug Sockets; Universal Joint, 3/8”
Glow Plug Thread Repair Kit; 33-Piece
Glow Plug Thread Repair Kit: M8, 9, 10, 12
For repairing the glow plug mounting thread in the cylinder head.
Includes:
5x reamer for reaming the original thread.
M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
5x taps for threaded sleeves.
M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
5x taps for trimming the original thread M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
Assembly tools for inserting the threaded sleeves.
5x threaded sleeves M8 x 1.0 (11 mm long).
5x threaded sleeves M9 x 1.0 (11 mm long).
5x threaded sleeves M10 x 1.25 (12 mm long).
5x threaded sleeves M10 x 1.0 (12 mm long).
5x threaded sleeves M10 x 1.0 (19 mm long).
5x threaded sleeves M12 x 1.25 (12 mm long).
5x threaded sleeves M12 x 1.25 (19 mm long).
5x threaded sleeves M12 x 1.25 (26 mm long).
Hand Held Brake Pipe Flaring Tool
Heavy Duty Coilspring Compressor Left Hand Version ; 7-Piece
Left Hand Version
To be used on all left handed coil springs fitted on all modern vehicles.
Ideal on Mcpherson Struts
To be used on McPherson struts with cylindrical and conical springs.
Set Contains
1 x telescopic spindle.
3 x chuck couples.
1 x spacer for conical springs.
6 x plastic spring protectors.
Universal Applications Include
Audi, Alfa Romeo, BMW, Chrysler, Citroen, Ford, Fiat, Honda, Hyundai, Kia, Land Rover, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Seat, Subaru, Suzuki, Toyota, Vauxhall, VW and Volvo.
Heavy Duty Oil Filter Wrench XL 120-145mm
Heavy Duty Slide Hammer
HGV-Track Rod End Removal Tool
Specially designed to remove track rod ends found on HGVs.
Particularly useful when the tapper is separated.
Can be used with an impact wrench and 36 mm socket.
Simple solution to an awkward problem.
Because of the scale of the track rod and the build up of dirt the task can prove tricky. This simple solution allows you to use pneumatic tools to aid in the removal of the track rod saving time and unwanted effort. Must have!!!.