Injector Removal Tool Kit; Vibration Hammer Edition
Injector Removal Tool; Vauxhall, Opel Direct Injection Petrol
Welzh Injector Removal tool
For use on the late model 1.0L and 1.4L direct injection petrol engines used across the Vauxhall, Opel and some MG ranges. These small injectors are centrally mounted low between the cam shafts and in line with the spark plugs.
Effective Removal
Some force is required to remove the injectors. The most effective way to remove these is to use the adaptor set with the WELZH Vibration Mate (4590-WW, 4589-WW). The Injector Removal Tool (4998-WW) adaptor set has been specifically design to bolt directly to the fuel rail mounting on the Petrol Injector 5/8? UNF slide hammer adaptor.
Applications include:
MG ZS (2017 - 2021), Vauxhall/Opel Adam (2016 - 2020), Astra K (2015 - 2019), Corsa E (2015 - 2020) and Mokka X (2018 - 2020).
Engine code applications include: 1.0L LE1/B10, 1.4L LDD/D14XEL, D14XER, LE2/D14XFL, D14XFT, LUJ/D14NE, D14NEH, D14NEJ, LUJ/D14NEL and 1.5L 15E4E.
Designed to bolt directly to the 2 bolt fixing on the fuel pipe mounting plate. Equivalent to OEM TEN00140.
Injector Remover for Bosch Injectors; Diesel
Quickly and easily remove stubborn stuck diesel injectors.
Suitable for assembling and disassembling tightly fit common rail injectors.
Suitable for e.g. Mercedes CDI engines 611, 612 and 613.
Suitable for working in confined spaces due to the low support cylinder diameter.
Special tool construction allows to pull injector with high force.
Injector Sealing Plug Set, 12-Piece
12-Piece Injector Sealing Plug Set.
For sealing Injectors prior to pressure loss Testing.
Protects the Injector from contamination during Work.
Suitable For use on: Bosch, Delphi, Siemens & Denso Injectors.
Applications: Opel-Vauxhall, Mazda, Ford-Volvo, PSA Group, Mercedes-Benz, Renault, Fiat-Chrysler & Others.
Contents: 6x M12x1.50 Caps, 6x M14x1.50 Caps.
Injector Seat Cleaners; 17-Piece
Used to clean and de-carbonise injector seats when changing injectors.
Suitable for a wide range of vehicles.
Contents:
14mm x 14mm Flat Reamer.
15mm x 19mm Flat Reamer.
15.5mm x 15.5mm Flat Reamer.
15.5mm x 15.5mm Angled Reamer.
17mm x 17mm Angled Reamer.
17mm x 17mm Flat Reamer.
17mm x 17.5mm Flat Reamer.
17mm x 19mm Flat Reamer.
17mm x 19.5mm Flat Reamer.
17mm x 20mm Flat Reamer.
17mm x 21mm Angled Reamer.
17.5mm x 20.5mm Angled Reamer.
19mm x 21.5mm Flat Reamer.
Pilot Hex 19 x 170mm.
15.5 X 250mm Cutter.
2.5mm Hex Key.
T-handle.
Injector Seat Cleaners; 6-Piece
Injector Seat Cleaners; VAG Engines, 2.0L Common Rail
Injector Service Kit; Bosch, Delphi, Denso, Siemens
Injector Shaft Wire Brush Cleaning Set
Inner-Driveshaft Extractor Fork
Designed to allow for the quick and safe removal of drive shafts by connecting properly with the locking clip rings found on many front wheel drive vehicles in order to properly leverage out the inner driveshaft.
Slots in perfectly between the gear box and the driveshaft for optimal contact and leverage on a wide range of common vehicles including Ford, Volvo, Renault, Mazda, and more.
Having this proper tool prevents damage to the drive shaft and surrounding components with no need to pry, hammer or pull.
Made from 10mm thick steel with corrosion resistant zinc coating.
Rubber coated handle with hanging hole.
Contact Lever Diameter: 55mm.
Jaw Diameter: 85mm.
Length: 380mm.
Insulation Resistance Multimeter CAT 3 RMS;
Inter Link Coil Spring Compressor
Universal spring compressor for wishbone/multi-link suspension with angled jaws.
Makes it easier, safer and more convenient to position the tool correctly inside the spring.
Prevents overload and improves safely.
Handles 95% of all cars with wishbone/multi-link suspension rear example VW Touran, Citroen C3, Skoda Octavia, Peugeot 107.
Internal & External Thread File, 0.75 – 3.00mm
Jack; 3-Ton Extended Pneumatic, 3-Balloon
High Capacity
The pneumatic jack capacity: 3 ton (6600 lbs).
Lifiting Height Range: 15-40 cm (5.9"-15.75").
Well Constructed
The pneumatic jack is made of high strength steel, the whole body is sturdy and durable.
Larger stressed area, fits on soft and easy-collapsing place.
Thickened Rubber
The thickened rubber and steel plate work together to make the lifting safer and more stable. The combination also reduces impact, and leads to precise lifting.
Leakage Tester For Engine Charging Systems
This kit has been designed to charge the turbo system with allow pressure of regulated workshop.
air to show the presence of leaks within the system.
Professional and economic trouble shooting.
Safety valve prevents applying to much pressure preventing damage.
Features a pressure gauge, shutoff valve and pressure release valve.
This kit can also be used on cooling system hoses, turbochargers, G-Chargers.
Universal use to fit most charging systems.
Art.1237 is an updated kit for use on modern vehicles with smaller style hoses.
Light Cover Remover Set; 2-Piece
Lock Nut Mate® Generation-3 Locking Wheel Nut Removers
Lock Out Tool Kit; Universal
Locking Plier; Parrot Nose 7”Inch
Lok-Jaw™; Right Angled Locking Pinch Pliers
90° Jaw Design:
Designed specifically to improve access to hoses with a 90° Jaw style.
Lok-Jaw™ Technology:
This allows complete locking on the hose with out damage unlike other traditional pliers.
Wide Jaw Style:
The wide Jaws allows to clamp large single hose or can clamp Multiple hoses at the same time.
Magnetic Stand For Measuring Instruments
Magnetic Sturdy Base:
The heavy base is magnetic and holds the stand firmly whilst operating.
On and Off Magnet:
The strong magnet can be turned on or off to allow easy removal and accurate placement.
Our Digital Gauge is under 3310-WW.
Ideal for Various Jobs:
An extremely versatile and useful tool for a multitude of automotive and engineering purposes.
Other Specifications:
Adjustable arm with joints for bending and repositioning.
Suitable for holding mechanical and digital dial gauges.
Can hold dial gauge for 4.5mm and 8mm shafts.
Manual Brake Bleeder Universal 2-Litre
Manual Brake Bleeder Universal 4-Litre
Master 8-Piece Replacement Spindle Set M10,M12,M14,M16
Complete Replacement Set
Contains 8 replacement spindles in sizes M10, M12, M14, M16
Includes extra stubby 228mm and extra long 450mm spindles
Supplied in EPA foam tray for convenient storage
Compatible Tools
Works with WELZH 1027-ww and 78093-ww
Fits as direct replacements for welding applications
Durable Construction
Made from quality materials for longevity
Stubby and long spindles for versatility