Universal Glow Plug Extraction Master Kit
With the top of the glow plug damaged i.e. snapped off getting the glow plug can be a very awkward and expensive task. This kit has been developed to save huge amounts of effort and costs during this common task and is a must-have innovative kit for any mechanic.
Complete kit for glow plugs electrode extraction: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25.
Includes all the necessary tools: (9 x extraction rods, 4 x glow plug guides and 1 x slide hammer) for safely removing the terminal part of the glow plug electrode without damaging the cylinder head.
Universal Hydraulic Flaring Tool Set
Comprehensive hydraulic flaring kit for suitable for use on GM fuel lines, brake lines, transmission.
lines and air conditioning lines.
Hand held hydraulic pump allows for easy use.
Sizes:
45° Double Flaring: 3/16'', 1/4'', 5/16'', 3/8'', 1/2''.
Metric Bubble Flaring: 4.75, 6, 8, 10mm.
Push-Connect Forming 1/4'', 5/16'', 3/8''.
GM Fuel Line Forming: 5/16'', 3/8''.
Universal Press & Pull Sleeve Set
This Universal tool is designed for removing and installation of silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.
The tool set is ideal for different vehicles such as car, SUV, van and can be used with spindle and hydraulic-workshop-press.
Spindles classed as consumables, replacements available in kits and separately.
20 Pressure Sleeves with control cut-out:
Inside diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72mm.
Outside diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82mm.
Ball Bearing Spindles: M10, 12, 14, 16.
Universal Press & Pull Sleeve Set Extra Small
Specially Designed Universal Press and Pull Sleeve tool is designed for removal and installation of silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.
Extra low profile Cups allow for use in other wise restricted areas.
The Spindles are shortened to utilise the new Extra Low profile Design.
The tool set is ideal for different vehicle classes such as cars, SUV, van and can be used with spindle and hydraulic-workshop-presses.
Height: 30mm.
Diameters 34-82mm.
Material:Â S45C Cr-Mo.
Universal Press & Pull Sleeve Set For Commercial Use
Applications:Â Silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.
This kit is ideal for different commercial vehicles such as LGVS, HGVS, Tractors etc. and can be used with spindle and hydraulic-workshop-press.
Slotted sleeves allows an easy view of the bearing or bush etc.
Particularly useful for HGV due to the much larger sizes.
Sizing of cup inside: 74, 76, 78, 80, 82, 84, 86, 88, 90, 92, 94, 96, 98, 100, 102, 104, 106, 108, 110, 112mm.
Outside: 84, 86, 88, 90, 92, 94, 96, 98, 100, 102, 104, 106, 108, 110, 112, 114, 116, 118, 120, 122mm.
Inner Sleeve Sizes: 74-112mm (2mm steps).
Outer Sleeve Sizes: 84-122mm (2mm steps).
Spindle sizes: M10, 12, 14, 16, 18.
Universal Press Support Frame
Can be used as a standalone kit but with added Welzh adapter kits more specialist applications can be completed.
The benefit for any garage or workshop is the ability to have one frame and add the adapters you need.
Includes:
2 sets of legs, allowing for a wider range of applications.
2 adapter rings for use with press and pull and ball joint kits.
Allan key for the interchangeable legs.
Vibro-Spindle.
Universal Press Support Stacks
Set of 3 specially innovated Press Block Stacks.
Designed to provide an efficient and effective quick solution to assist in the pressing & removal of wheel bearings & housings; working in conjunction with the Hydraulic Press.
The unlevel design of wheel bearing housings/arms makes it extremely difficult in pressing new bearings in. Pressing them in level is almost impossible. The WELZH innovative design with precision cut outs allows for superior pressing in almost all wheel bearings housing from all manufacturers.
Universal Pulley Puller
Universal Stretch Belt Tool
Universal Valve Spring Installer and Remover Tool Set
Designed for the assembly and disassembly of valve springs or when replacing the valve stem.
This kit is designed to work without removing the cylinder head.
Valves will be closed using pressurised air preventing falling into the combustion chamber.
Perfect for working in confined areas.
Applications:
Mercedes-Benz: M102, M103, M104, M111, M112, M113, M271, M272.
BMW: N42, N52, N62, M54, M52, M56, E38, M60, V8.
Can also be used on many other European, American and Japanese vehicles.
Universal Wheel Housing Spreader Tool
Specially designed for expanding suspension strut and ball joint mountings (to separate the suspension strut from the wheel bearing housing).
The large spreading range enables universal use for almost all vehicles.
Innovative design of the parallel pressure surfaces prevent the tool from slipping or jumping out.
Universal Wiper / Washer Removal Service Kit;
V-Ribbed Belt Mounting Tool Set
Vacuum / Pressure Pump Kit
VAG 1.8/2.0 TFSi Petrol
Engine Timing Tools Set VAG.
Audi: A3, A4, A5, A6, Q3, Q5, TT.
Seat: Leon, Toledo, Altea, Altea XL, Exeo, Alhambra.
Skoda: Yeti, Octavia II, Octavia III, Superb.
Volkswagen: Golf, Beetle, Jetta, Scirocco, Eos, Passat, Passat CC, Tiguan, Sharan, Amorok.
Engine Codes:
1.8 TFSi: BYT, CDAA, CJSA, BZB, CDAB, CJSB, CABA, CDHA, CABB, CDHB, CABD, CJEB.
2.0 TFSi: CAWA, CCZB, CDND, CHHA, CPLA, CAWB, CCZC, CESA, CHHB, CPSA, CBFA, CCZD, CETA, CJKA, CCTA, CDNB, CFKA, CJKB,.
CCZA, CDNC, CFPA, CNCD.
OEM Ref:
T10368, T10352, T10352/1, T10352/2 , T40011.
VAG Cigarette Lighter Release Tool
VAG Engine Timing Tool Set For 1.2 TFSI
For use on the following VAG Group models from 2009.
Audi: A1, A3, A3 Sportback, A3 Cabriolet.
Seat: Altea, Altea XL, Ibiza V, Ibiza Sport coupe, Leon, Toledo IV.
Skoda: Fabia II, Fabia Combi, Rapid, Octavia II, Octavia Combi, Rommster, Yeti.
Volkswagen: Beetle, Caddy III, Golf VI, Golf Plus, Golf Cabriolet, Golf Variant, Jetta IV, Polo, Touran.
Engine Codes.
CBZA , CBZB, CBZC.
VAG Engine Timing Tool Set For 1.6 & 2.0 Common Rail Diesel
Vag Engine Timing Tool Set For 1.8/2.1 4V TFSi Engines
VAG Group vehicles with 1.8/2.1l 4v TFSi.
Engines.
Audi: A3, A4, A5 A6, S3, TT.
Seat: lhambra, Altea, Exeo, Ibiza, Leon, Toledo.
Skoda: Octavia II, Octavia III, Superb II, Yeti.
VW: Amarok, Beetle / Maggiolino, CC, Eos,.
Golf V, Golf VI, Golf VII, Jetta, Passat,.
Scirocco, Sharan, Tiguan, Transporter.
Audi (from ‘07) - BPU, BYT, BZB, CAWB,.
CBFA, CCTA, CCZA, CDAA, CJSA, CJSB,.
CABA, CABB, CDHA, CDHB, CDNB, CDNC,.
CFKA, CJEB, CNCD, CABD, CCZC, CPSA,.
CJXB, CJXC, CESA, CETA, SEAT (from ‘06).
-CCZA, BYT, BZB, CCZB, CDAA, CDHA,.
CDHB, CDND, CTHE, CTHF, CTJB, CTJC,.
CJSA, CCZB.
Skoda (from ‘07) - BZB, CDAA, CDAB, CJSA,.
CJSB, CCZA, CDAA, CDAB.
VW (from ‘07) BZB, CDAA, CDAB, CJSA,.
CJSB, CCZA, CDAA, CDABBZB, CDAA,.
CDAB, CJSA, CJSB, CCZA, CDAA, CDAB,.
CDAA, CDAB, CJSA, CJSB, CCZA, CDAA,.
CDAB.
OEM Tools:T10352 - Camshaft control valve.
removal tool, T40267 - Chain tensioner.
T40011 - Tensioner locking pin (1.4mm).
T40271 - 1 Camshaft clamp for exhaust cam.
T40271 - 2 Camshaft clamp for inlet cam.
VAS6079 - DTi Gauge.
T40265 - Oil pump tensioner locking pin.
T10170 - TDC indicator.
VAG Engine Timing Tool Set For 2012 CR TDi Engines 1.6 & 2.0
For Setting the engine timing on VW / 1.6L & 2.0L engines 2013 Onwards.
VW: Golf SV/Sports van, Golf VII, Golf VII Estate, Golf VII Wagon, Polo.
SEAT: Leon, Leon ST.
Audi: A3 Cabrio, A3 Saloon, A3 Sedan, A3/A3 Sportback, A4, A4 all road, A4 quattro, A5 Coupe / Cabriolet, A5 Sportback, A6, Q5, TT.
Skoda: Octavia III / Motore: 1.4TDI CR, 1.6TDI CR, 1.6TDI CR GreenLine, 1.6TDI CR BlueMotion, 1.6TDI CR Ecomotive, 2.0TDI CR, 2.0 RS TDI CR, 2.0TDI CR Ultra / Codici motore:
Engine Codes:
CKFB, CKFC, CLHA, CLHB, CNHA, CNHC, CRBC, CRBD, CRFA, CRFC, CRKA, CRKB, CRLB, CRLC, CRMB, CRVA, CRVC, CSUA, CSUB, CUNA, CUPA, CUTA, CUSA, CUSB, CXEB.
OEM:
T10264 / T10265 / T10490 / T10051 / T10060A / T10492 / 3359.
Vauxhall, Opel, Nissan, Renault Timing Tool Set For 1.6 & 2.0 & 2.3 DCi/CDTI M9R/M9T
Timing tool kit for Renault 1.6/2.0DCI chain drive diesel engines fitted to the Megane, Vel Satis, Espace, Scenic, Trafic Laguna, Koleos. Engine code M9R.
Suitable for setting and locking.
1.6 & 2.0 & 2.3 DCi/CDTi chain drive engines fit in Renault, Nissan and Vauxhall/Opel models with M9R/M9T engine code.
OEM Codes: KM 6130, MOT1770, KM 956-1, EN- 48334, MOT1769, MOT 1969, EN48332, MOT1773, MOT1766, EN48330, 09953-05010, MOT 1970 , MOT 1969.
Vauxhall, Opel, Nissan, Renault Timing Tool Set For 2.0DCi M9R engines
To be used for setting the timing on Nissan and Renault vehicles with M9R engine codes.
Included:
Includes a Crankshaft Holding Tool.
Auxiliary Belt Tensioner Locking Pin.
Crankshaft Pulley Holding Tool.
Camshaft Setting Tool.
Camshaft Gear Alignment Bracket.
Crankshaft Locking Pin.
Chain Tensioner Locking Pin.
M6 Bolt.
4mm Hex Key.
Applications:
Nissan M9R: 780, 830, 832, 833.
Qashqai (07- ).
X-trail (07- ).
Primastar (08- ).
Renault M9R 700, 721, 722, 724, 740, 742, 746, 760, 761, 780, 802, 803, 805, 830, 832, 833.
Espace Mk4 (06- ).
Grand Scenic Mk2 (05- ) Mk3 (09- Automatic ).
Koleos (08- ).
Laguna Mk2 (05- ) Mk3 (07-).
Megane Mk2 (05- ).
Scenic Mk 2 (05- ) Mk3 (09- Automatic).
Traffic Mk2 (06- ) Mk3 (2010- ).
Vel Satis (05- ).
Vauxhall M9R 780, 782, 784.
Vivaro (06- ).