Coil Spring Compressor (Wishbone Version)
Universal spring compressor for wishbone/multi-link suspension with angled jaws.
Makes it easier, safer and more convenient to position the tool correctly inside the spring.
Prevents overload and improves safely.
Handles 95% of all cars with wishbone/multi-link suspension rear example VW Touran, Citroen C3, Skoda.
Octavia, Peugeot 107.
Coilspring Compressor; Floor Standing, 1500 kg
Capacity: 1500kg.
Foot operated hydraulic unit with safety chain.
More efficient and quicker than ratchet style compressors.
Yokes are coated in a rubberised plastic to prevent damage and slippage.
Suitable for spring with a diameter of 80 to 175mm.
480mm Max Working Length.
325mm Ram Travel.
Complete with two sets of yokes.
Available separately:
819-1-WW: Replacement Hydraulic Ram.
Common Rail Dummy Regulator Set
Function
Used alongside Welzh Diesel High Pressure Pump Test Kit (4606-WW) to diagnose regulator and pump issues.
Diagnosis Process
Identify Weak Pump Pressure: Observe low pump pressure.
Regulator Check: Remove regulator from the system.
Bypass and Seal: Select appropriate dummy plug to seal the port.
Pressure Observation: Monitor pressure response.
Results Interpretation
If pressure returns to normal: Regulator likely causing pressure loss.
If pressure remains low: Pump may be defective.
Manufacturer Recommended
Endorsed testing method by high-pressure pump manufacturers.
Kit Contents
Includes 8 diverse dummy plugs for sealing regulator ports.
Common Rail Flow Meter Set
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
Compact Wheel Bearing Kit 62, 66, 72, 85mm GEN2 VAG Master Kit
The GEN 2 type of wheel bearing is predominantly fitted to models from VW Group.
Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers.
Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings.
GEN2 Combination Kit for Audi / Seat / Skoda / VW applications.
62mm Kit - Audi A2, VW Lupo (Front).
66mm Kit - Skoda Fabia, VW Fox (Front), Polo.
72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front).
85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear).
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 62, 66, 72, 78, 82, 85mm GEN2
The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo.
Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers Audi, Seat, Skoda & VW.
Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings.
Consists of all necessary parts from the 62, 66, 72, 78, 82 & 85mm kits:
62mm Kit - Audi A2, VW Lupo (Front).
66mm Kit - Skoda Fabia, VW Fox (Front), Polo.
72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front).
78mm Kit - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3.
82mm Kit - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70.
85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear).
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 62, 66, 72mm GEN2
Compact Wheel Bearing Kit; 78mm GEN2
Facilitates assembly and disassembly of front wheel hub-bearing unit.
Suitable for following models:
Ford Focus 2 as of 2004, C-Max as of 2003.
Volvo C30 as of 2006, C70 Cabriolet as of 2006. S40 as of 2004, V50 as of 2004, Mazda.
Designed to work with OEM hub units.
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 82mm GEN2
Compact Wheel Bearing Kit; 85mm GEN2
The GEN 2 type of wheel bearing is predominantly fitted to models from VW Group.
Includes a variety of different diameter tool kits covering a range of sizes to suit the different.
GEN2 bearings used by vehicle manufacturers.
Designed to distribute pressing force evenly through the outer bearing race and also allows for.
the suspension leg to remain in-situ on the vehicle when fitting new bearings.
GEN2 Bearing Removal Combination Tool Kit: 62 / 66 / 72 / 85mm.
Combination Kit for Audi / Seat / Skoda / VW applications.
Consists of all necessary parts from the 62, 66, 72, 78, 82 & 85mm kits.
62mm Kit - Audi A2, VW Lupo (Front).
66mm Kit - Skoda Fabia, VW Fox (Front), Polo.
72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front).
85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear).
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 90mm GEN2
Compact Wheel Bearing Kit; Ford Transit, GEN2
Compact Wheel Bearing Set 72mm GEN2
Connector Removal Tool VAG & Porsche
Cooling System Bleeding and Filling Tool; 6-Piece
Cordless Circuit Tester
Cordless Circuit Tester; Heavy Duty
Cordless Electric Hot Stapler
Crankshaft Pulley Puller
CV Boot Clamp Pliers
CV Boot Clamp Pliers 260mm
Applications: Earless clamps fitted to axle boots on Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes Benz, Nissan, Opel, Porsche, VAG.
Length: 260mm.
Dipped handles.
Spring loaded action.
Also suitable for thermoplastic axle boots.
Suitable for clamps up to 100 mm diameter, for example Oetiker 168.