110-Piece Metric & SAE Tap + Die Set
Designed for fine threads in particular.
Made from Tungsten Steel.
Included:
2 tap holders.
2 die holders.
1 T holder.
Each 35 taps and dies in following sizes / flank leads:
4-40UNC, 6-32UNC, 8-32UNC, 10-24UNC.
10-32UNF, 12-24UNC, 12-24UNC, 1/4-28UNF.
1/4-24UNS, 1/4-32UNS, 5/16-18UNC, 5/16-24UNF.
3/8-16UNC, 3/8-24UNF, 7/16-14UNC, 7/16-20UNF.
1/2-13UNC, 1/2-20UNF, 9/16-12UNC, 9/16-18UNF.
5/8-11UNC, 5/8-18UNF, 3/4-10UNC, 3/4-16UNF.
M6X1,0, M8X1,25, M10X1,5, M10X1,0.
M11X1,5, M12X1,25, M12X1,75, M14X1,25.
M18X1,5, 1/8-27NP, 1/4-18NPT.
110-Piece Metric Tap + Die Set M2-M18
Especially for fine threads.
Made from Tungsten Steel.
2 tap holders.
2 die holders.
1 T holder.
Sizes:
M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0.
M6 x 0.75, M7 x 1.0, M7 x 0.75, M8 x 0.75, M8 x 1.0.
M8 x 1.25, M9 x 0.75, M9 x 1.0, M9 x 1.25, M10 x 0.75.
M10 x 1.0, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1.0.
M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1.0, M12 x 1.25.
M12 x 1.5, M12 x 1.75, M14 x 1.0, M14 x 1.25, M14 x 1.5.
M14 x 2.0, M16 x 1.0, M16 x 1.5, M16 x 2.0, M18 x 1.5.
114-Piece Oil Sump Repair Kit
This comprehensive kit has been designed to repair damaged threads in the oil sump.
Can also be used on gearboxes and differential drain plugs.
Simply re-tap the thread and fit the corresponding sump plugs.
The range of sizes in this set allows it to be used on most of the cars and LCV on the market today.
Includes:
Tap: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5 (1 each).
Plugs: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5(6 of each).
Washers: 13, 15, 17, 20, 22 mm (various).
131-Piece Thread Repair Set; M5-M12
For repairing threaded holes.
Minimizes time and expenses.
The set includes the following tools:
5 Twist drills for drilling out the defective threads.
5 Taps.
5 Installation tools for inserting the thread sleeves.
5 Insertion pin breakers for removing the tang in the sleeve.
25 Thread inserts M5 x 0.8mm.
25 Thread inserts M6 x 1.0mm.
25 Thread inserts M8 x 1.25mm.
25 Thread inserts M10 x 1.5mm.
10 Thread inserts M12 x 1.75mm.
30-Piece Metric Tap & Die Set M3-M12
40-Piece Tap & Die Set
Made from hardened carbon steel.
17 hand taps and 17 die stocks for:
Coarse thread: M3 x 0.6 mm - M4 x 0.75 mm - M5 x 0.9 mm - M6 x 1 mm - M7 x 1 mm - M8 x 1.25 mm - M10 x 1.5 mm - M12 x 1.75mm.
fine threads: M3 x 0.5 mm - M4 x 0.7 mm - M5 x 0.8 mm - M6 x 0.75 mm - M7 x 0.75 mm - M8 x 1 mm - M10 x 1.25 mm - M12 x 1.5 mm - 1/8'' NPT27.
1 adjustable tap wrench.
2 die holders.
1 screw pitch gauge.
1 screwdriver slot SL.
45-Piece Tap + Die Set M6-M24
20 taps for internal threads and 20 dies for external threads (one each size):
Pitch 0, 75: M6.
Pitch 1, 00: M8-M6.
Pitch 1, 25: M8-M10.
Pitch 1, 50: M10-M12-M14-M16-M18-M20-M22-M24.
Pitch 1, 75: M12.
Pitch 2, 00: M14-M16.
Pitch 2, 50: M18-M20-M22.
Pitch 3, 00: M24 each.
1 adjustable tap wrench.
1 T-type tap wrench.
1 die holder.
1 adaptor for die holder.
1 plain slotted screwdriver 6mm.
Made from Tungsten Steel.