CV Boot Clamp Pliers
CV Boot Clamp Pliers 260mm
Applications: Earless clamps fitted to axle boots on Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes Benz, Nissan, Opel, Porsche, VAG.
Length: 260mm.
Dipped handles.
Spring loaded action.
Also suitable for thermoplastic axle boots.
Suitable for clamps up to 100 mm diameter, for example Oetiker 168.
Dead Blow Hammer Set; 4-Piece
Piston hammer features an extended head that allows the hammer to pass the deck of the engine block for piston installation.
Piston hammer provides dead blow action and absorbs shock, reducing the chance of injury.
Complete range for a wide variety of Uses.
Soft face to stop damage to surfaces.
Includes.
7027-1-WW 1/2 lbs. Dead Blow Hammer.
7027-2-WW 1 lbs. Dead Blow Hammer.
7027-3-WW 2 lbs. Dead Blow Hammer.
7027-4-WW 32 oz. Piston Hammer.
Die Grinder & Attachment Set
Free speed: 22000r/min.
Max. operating pressure: 0.65MPa.
Avg. air consumption: 5cfm.
Hose Size: 3/8?.
Air inlet: 1/4?.
Noise: Lpc,peak:106.5dB(A) LWA:103.5dB(A).
LPA:92.5dB(A), Uncertainly K: 3dB(A).
Vibration: Mean value: 1.56m/s2,Uncertainly K:0.22m/s2.
Contents
1/4" air die grinder.
5 pcs 1/ 8"mounted grinding stones.
5 pcs 1/ 4"mounted grinding stones.
1/4" nipple.
1/ 8"collet.
2 pcs collet hand wrench.
Diesel High Pressure Pump + Leads
Accurate Measurement
Essential tool for accurately measuring the high pressure fuel circuit of diesel common rail systems.
Includes
2,000bar gauge and high pressure flexible hoses.
Conducts a Variety of Tests
Engine cranking/running pressure test.
Maximum pump pressure test.
Pump pressure regulator test.
Injector leakage test.
Digital Vernier Calliper with Digital Display
Door Trim Pliers
Drill Bit Set, Fully Ground Cobalt Extra Stubby; 19-Piece Set
Drill Bit Set; Cobalt, 19-Piece Set
Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm.
Advanced 118 degree Fully ground Split Point.
Short chisel edge for reduced drilling resistance.
Suitable for drilling in steel, cast iron, non-ferrous metals, alloyed & non-alloyed material.
Drill Bit Material: HSS 4241 Cobalt.
Long lasting working capacity.
Drill Bit Set; Fully Ground HSS, Titanium Coated; 230-Piece Set
Fully ground from solid material (HSS) and titanium coated.
These drills are ideal for pairing alloyed & unalloyed steel with a tensile strength up to 800 N/mm², other metals, cast iron & hard plastics.
10 of each size: 1, 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 10mm.
5 of each size: 9, 9.5, 10.5, 11, 11.5, 12, 12.5, 13mm.
Drill Bit Set; Fully Ground, 170-Piece Set
Drill Bit Set; Fully Ground; Cobalt, 170-Piece Set
Drill manufactured to DIN 338.
Ground from solid material.
1.0-8.0 mm ascending to 0.5mm: 10 pieces each.
8.5-10.0 mm ascending to 0.5mm: 5 pieces in metal box.
These drills are ideal for pairing alloyed & unalloyed steel with a tensile strength up to 800 N/mm², other metals, cast iron & hard plastics.
Drill Bit Set; Fully Ground; Cobalt, 25-Piece Set
Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm.
Advanced 118 degree Fully ground Split Point.
Short chisel edge for reduced drilling resistance.
Suitable for drilling in steel, cast iron, non-ferrous metals, alloyed & non-alloyed material.
Drill Bit Material: HSS 4241 Cobalt.
Long-lasting working capacity.
Drill Bit Set; Twist Drill Set HSS Titanium nitrated 1 – 10 mm 170-Piece
Titanium Nitrated Coating:
Twisted drill bits roll forged and coated with titanium nitrate allowing for increased durability & long lasting strength.
Strong & Long Lasting Drill Bits:
Drills manufactured in accordance with DIN 338.
For Drilling in Various Materials:
Suitable for drilling plastics, wood, steel, cast iron,non-ferrous metals, alloyed & non-alloyed material.
Sizes Included:
1.0-8.0 mm (in 0.5mm steps): 10 piece each.
8.5-10.0 mm (in 0.5mm steps): 5 piece each.
Drill Out Kit with Guides; Universal
Drive Shaft Squeezing Pliers
Designed to pre-tension the drive shaft circlip during assembly of the outer constant velocity joint.
Suitable for: VW, Audi, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, SEAT, Skoda, Subaru, Suzuki, Toyota Etc.
By holding the driveshaft circlip with the 8022 the outer drive shaft splines can be easily assembled onto the CV joint.
Ergonomic Ratchet Pipe Clamps
EV Hybrid Tool Kit; 63-Piece
Comprehensive EV-Hybrid Tool Kit
A master EV tool kit designed for a wide range of applications, individually tested, and rated for 1,000 Volts
Rugged Design
Insulated VDE (Voltage Detection Equipment) fully compact tool case with rugged and shock-resistant features
EVA Technology Tray Development
All trays developed using EVA technology, providing durability and organization
Kit Includes:
Long Nose Pliers 8"
Side Cutter Pliers 6"
Combination Pliers 7"
Circuit Tester
Hex Key 3mm
Hex Key 4mm
Hex Key 5mm
Hex Key 6mm
Hex Key 8mm
Hex Key 10mm
Hex Key 12mm
1/2" Socket 10mm
1/2" Socket 11mm
1/2" Socket 12mm
1/2" Socket 13mm
1/2" Socket 14mm
1/2" Socket 16mm
1/2" Socket 17mm
1/2" Socket 18mm
1/2" Socket 19mm
1/2" Socket 21mm
1/2" Socket 22mm
1/2" Socket 24mm
1/2" Socket 27mm
1/2" Extension Bar 250mm
1/2" Ratchet Wrench
1/2" Bit Socket H4
1/2" Bit Socket H5
1/2" Bit Socket H6
1/2" Bit Socket H8
Wire Stripper 6"
Waterpump Pliers 10"
Adjustable Wrench 10"
Scissors 6"
Insluated Tape 10m
Philips Screwdriver PH1x80mm
Philips Screwdriver PH2x100mm
Pozi Screwdriver PZ1x80mm
Pozi Screwdriver PZ2x100mm
Slotted Screwdriver SL3x0.5x100mm
Slotted Screwdriver SL4x0.8x100mm
Slotted Screwdriver SL5x1x125mm
Slotted Screwdriver SL6x1.2x150mm
Torx Screwdriver T15x80mm
Torx Screwdriver T20x100mm
Torx Screwdriver T30x130mm
Open Ended Spanner 6mm
Open Ended Spanner 7mm
Open Ended Spanner 8mm
Open Ended Spanner 9mm
Open Ended Spanner 10mm
Open Ended Spanner 11mm
Open Ended Spanner 12mm
Open Ended Spanner 13mm
Open Ended Spanner 14mm
Open Ended Spanner 15mm
Open Ended Spanner 16mm
Open Ended Spanner 17mm
Open Ended Spanner 19mm
Open Ended Spanner 21mm
Wire Clamp 10mm
Wire Clamp 20mm
Wire Clamp 30mm