Injector Removal Kit; HDI Injectors
or use in the extraction of Bosch and Siemens HDI injectors. No need to remove the cylinders heads with this kit.
Suitable for vehicles with PSA 2.0l DW10/12 engines which can also be found on Toyota, Mazda and Hyundai models.
Included2 ball bearing puller spindles 2 Open sockets for removal of the electric unit. High performance support frame with spindle bearings.
Injector Removal Master Kit; Bosch, Delphi, Denso, Siemens
Master kit for use on Bosch, Delphi, Denso and Siemens injectors.
Can also be used on non branded injectors.
Included are special adapters for internal and external threads.
For more modern injectors look for Art. 4199.
Slide hammer 1.6kg, 160mm.
Slide hammer 2.7kg, 460mm.
Slide hammer 5.1kg, 600mm.
Pulling claw 13.7 x 18 mm, 105 mm long.
Pulling claw 12.7 x 19 mm, 130 mm long.
Slotted socket 1/2'' 25, 27, 28, 29, 30mm.
Pulling adapter Internal thread M27 x 1.0 (x3), M25 x 1.
Pulling adapter External thread M27 x 1.0 (x3).
Hammer adapter for all adapters.
Injector Removal Socket; Bosch
Injector Removal Tool Kit; Vibration Hammer Edition
Injector Removal Tool; Vauxhall, Opel Direct Injection Petrol
Welzh Injector Removal tool
For use on the late model 1.0L and 1.4L direct injection petrol engines used across the Vauxhall, Opel and some MG ranges. These small injectors are centrally mounted low between the cam shafts and in line with the spark plugs.
Effective Removal
Some force is required to remove the injectors. The most effective way to remove these is to use the adaptor set with the WELZH Vibration Mate (4590-WW, 4589-WW). The Injector Removal Tool (4998-WW) adaptor set has been specifically design to bolt directly to the fuel rail mounting on the Petrol Injector 5/8? UNF slide hammer adaptor.
Applications include:
MG ZS (2017 - 2021), Vauxhall/Opel Adam (2016 - 2020), Astra K (2015 - 2019), Corsa E (2015 - 2020) and Mokka X (2018 - 2020).
Engine code applications include: 1.0L LE1/B10, 1.4L LDD/D14XEL, D14XER, LE2/D14XFL, D14XFT, LUJ/D14NE, D14NEH, D14NEJ, LUJ/D14NEL and 1.5L 15E4E.
Designed to bolt directly to the 2 bolt fixing on the fuel pipe mounting plate. Equivalent to OEM TEN00140.
Injector Remover for Bosch Injectors; Diesel
Quickly and easily remove stubborn stuck diesel injectors.
Suitable for assembling and disassembling tightly fit common rail injectors.
Suitable for e.g. Mercedes CDI engines 611, 612 and 613.
Suitable for working in confined spaces due to the low support cylinder diameter.
Special tool construction allows to pull injector with high force.
Injector Sealing Plug Set, 12-Piece
12-Piece Injector Sealing Plug Set.
For sealing Injectors prior to pressure loss Testing.
Protects the Injector from contamination during Work.
Suitable For use on: Bosch, Delphi, Siemens & Denso Injectors.
Applications: Opel-Vauxhall, Mazda, Ford-Volvo, PSA Group, Mercedes-Benz, Renault, Fiat-Chrysler & Others.
Contents: 6x M12x1.50 Caps, 6x M14x1.50 Caps.
Injector Seat Cleaners; 17-Piece
Used to clean and de-carbonise injector seats when changing injectors.
Suitable for a wide range of vehicles.
Contents:
14mm x 14mm Flat Reamer.
15mm x 19mm Flat Reamer.
15.5mm x 15.5mm Flat Reamer.
15.5mm x 15.5mm Angled Reamer.
17mm x 17mm Angled Reamer.
17mm x 17mm Flat Reamer.
17mm x 17.5mm Flat Reamer.
17mm x 19mm Flat Reamer.
17mm x 19.5mm Flat Reamer.
17mm x 20mm Flat Reamer.
17mm x 21mm Angled Reamer.
17.5mm x 20.5mm Angled Reamer.
19mm x 21.5mm Flat Reamer.
Pilot Hex 19 x 170mm.
15.5 X 250mm Cutter.
2.5mm Hex Key.
T-handle.
Injector Seat Cleaners; 6-Piece
Injector Seat Cleaners; VAG Engines, 2.0L Common Rail
Injector Service Kit; Bosch, Delphi, Denso, Siemens
Injector Shaft Wire Brush Cleaning Set
Injector-Mate™ Copper Seal Extractor Kit
Inner-Driveshaft Extractor Fork
Designed to allow for the quick and safe removal of drive shafts by connecting properly with the locking clip rings found on many front wheel drive vehicles in order to properly leverage out the inner driveshaft.
Slots in perfectly between the gear box and the driveshaft for optimal contact and leverage on a wide range of common vehicles including Ford, Volvo, Renault, Mazda, and more.
Having this proper tool prevents damage to the drive shaft and surrounding components with no need to pry, hammer or pull.
Made from 10mm thick steel with corrosion resistant zinc coating.
Rubber coated handle with hanging hole.
Contact Lever Diameter: 55mm.
Jaw Diameter: 85mm.
Length: 380mm.
Insulation Resistance Multimeter CAT 3 RMS;
Intelligent High Capacity Booster Pack; 12/24 Volt, 40000mAh
Providing a starting aid for a car with a defective battery is not without risk. During the connection of the terminals high peak voltages can occur with a devastating effect on the car electronics. Welzh intelligent booster has built in electronic safety features to avoid any electrical damage, with its advanced 8-point protection system ideal for keeping your clients components safe during frequent professional use.
Compatibility: 99% Vehicle Coverage.
Compact Size: 245 x 240 x 100mm.
Voltage: 5 (USB) / 12 / 24.
Power Efficiency: 95%.
Capacity: 40,000 mAh.
Lightweight: 2.4 kg.
Max Amps: 2600.
Inter Link Coil Spring Compressor
Universal spring compressor for wishbone/multi-link suspension with angled jaws.
Makes it easier, safer and more convenient to position the tool correctly inside the spring.
Prevents overload and improves safely.
Handles 95% of all cars with wishbone/multi-link suspension rear example VW Touran, Citroen C3, Skoda Octavia, Peugeot 107.
Internal & External Thread File, 0.75 – 3.00mm
Jack; 3-Ton Extended Pneumatic, 3-Balloon
High Capacity
The pneumatic jack capacity: 3 ton (6600 lbs).
Lifiting Height Range: 15-40 cm (5.9"-15.75").
Well Constructed
The pneumatic jack is made of high strength steel, the whole body is sturdy and durable.
Larger stressed area, fits on soft and easy-collapsing place.
Thickened Rubber
The thickened rubber and steel plate work together to make the lifting safer and more stable. The combination also reduces impact, and leads to precise lifting.
Knife; Folding with Clip, ”Green”
Knife; Folding with Clip, ”Orange”
Knife; Folding with Clip, ”Red”
Lamp; COB Style, 3w Top and Strip Light
Shock proof multi-function work-light with USB charging.
Dual hooks and magnets allows it to placed while using other tools.
3w COB light and 3W top lamp product ample brightness.
180 degree base rotations with high powered base magnet.
Sunken lens prevents scratches increasing longevity.
Shatter-proof protective housing.