Socket Tool Set; 6Pt, 36-80mm, 1”
Socket Tool Set; 6Pt, 36-80mm, 1”
Socket Tool Set; Chrome, 1/4”, 3/8”, 1/2” (191 pcs)
1/2'' Contents:
72 tooth ratchet.
Extensions: 125 & 250mm.
Bit holder for 8 mm bits.
Female Torx: E20, E24.
Universal Joint.
Shallow sockets:10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm.
Deep sockets:16, 17, 18, 19, 22mm.
1/4'' Contents:
72 tooth ratchet.
Extensions: 50 & 100mm.
1/4'' bit holder.
Female Torx: E4, 5, 6, 7, 8.
Sliding T-bar.
6.3mm handle.
Universal joint.
Shallow sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.
Deep sockets: 4, 5, 6, 7, 8, 9, 10mm.
Phillips bits: No. 0, 1, 2.
Pozi bits: No. 0, 1, 2.
Slot bits: 4, 5.5, 6, 7mm.
Torx bits: T8, 9, 10, 14, 20, 25, 27, 30.
Tamper torx: T9, 10, 15, 20, 25, 27, 30.
Hex bits: 3, 4, 5, 6mm.
3/8'' Contents:
72 tooth ratchet.
Extension: 150mm.
Bit holder for 8 mm bits.
Female Torx: E10, 11, 12, 14, 16, 18.
Spark plug socket 18mm.
10 mm adapter.
Universal joint.
Shallow sockets: 10, 11, 13, 14, 15, 16, 17, 18, 19mm.
Deep sockets:10, 11, 12, 13, 14, 15mm.
8 mm slotted bit: 8, 10, 12mm.
8 mm cross bit: Ph3, Ph4, Pz3 Pz4.
8 mm hex bit: 7, 8, 9, 10, 12, 14.
8 mm torx bit: T40, 45, 50, 55, 60, 70.
8 mm tamper torx bit:T40, 45, 50, 55, 60, 70mm.
Socket Tool Set; Gearlock Sockets, 1/4”, 3/8”, 1/2”
1/4'' Contents:
72 tooth ratchet.
6.3 mm handle.
Sliding T-bar.
Extensions: 50 and 100mm.
1/4'' bit holder.
Female torx: E4, 5, 6, 7, 8.
Universal joints.
Shallow sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.
Deep sockets: 4, 5, 6, 7, 8, 9, 10mm.
Phillips bits: No. 0, 1, 2.
Pozi bits: No. 0, 1, 2.
Slot bits: 4, 5.5, 6, 7mm.
Torx bits: T8, 9, 10, 14, 20, 25, 27, 30.
Tamper torx: T9, 10, 15, 20, 25, 27, 30.
Hex bits: 3, 4, 5, 6mm.
3/8'' Contents:
72 tooth ratchet.
Extension: 150mm.
Bit holder for 8 mm bits.
Female torx: E10, 11, 12, 14, 16, 18.
Universal joint.
Spark plug socket 18mm.
10 mm adapter.
Shallow sockets: 10, 11, 13, 14, 15, 16, 17, 18, 19.
Deep sockets: 10, 11, 12, 13, 14, 15.
1/2'' Contents:
72 tooth ratchet.
Extensions: 125 & 250mm.
Bit holder for 8 mm bits.
Female torx: E20, E24.
Shallow sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm.
Deep sockets: 16, 17, 18, 19, 22 mm.
Specialist Automotive Sockets 10-Piece
10S, 6pt., for Toyota idle wheel centre screw.
6S, 6pt., for Nissan & Renault clutch.
8S, 6pt., for Nissan cylinder head & balance shaft.
12S, 6pt., for Nissan cylinder head.
8TS, 3pt., for Nissan balance shaft.
10 mm, 5pt., for brake systems.
12 mm, 5pt., for Nissan fuel pump.
14 mm, 5pt., for GM & Smart Car.
19 mm, 5pt., for Peugeot, Renault & Citroen parking brake.
20 mm, 10pt., for Honda Civic lower control arm.
Length: 38mm.
Spreader Socket Set for Spring Strut Clamp, 5 x 7mm and 5.5 x 8.2mm
Subframe Locating Pins For VAG Group
Primary Used on a variety of VA Model Vehicles Including Volkswagen Scirocco 09-. EOS (06), Golf (09), Golf Plus (05), Jetta (04-06), Polo (02), Fox (06), Passat (06), Passat CL (09) and Audi A3 (04), TT (07) and A4 (01).
On some vehicles in the Volkswagen Audi Group the sub-frame needs to be removed to service the suspension bushes, when removing the clutch, changing the engine, servicing the wheels, steering, stabilizer bar or control arms.
These pins are screwed into the sub-frame and used to guide it back into place once the task is complete. Care should be taken to bolt back diagonally and to the manufacturer's recommended torque.
Two sizes are available: The first an M12 can be fitted to Volkswagen Scirocco (09), EOS (06), Golf (09), Golf Plus (05), Jetta (4-06) Polo (02), Fox (06), Passat (06), Passat CL (09), Audi A3 (04), TT (07) and A4 (01) - OEM T10096 (Sub-frame Locating Pins - Volkswagen and Audi Group (Part No 4722)).
The second size an M14 is primarily used for the new Volkswagen Crafter - OEM T10227 (Part No 4840).
Thin Walled Lambda Sensor Socket 22mm – Ford
Torque Multiplier Set 1”dr
Torque Multiplier Set Ford 1.0 EcoBoost
This torque multiplier set allows the correct mounting position and correct tightening sequence to be applied to the crankshaft pulley bolts. The torque multiplier has a gear ratio of 5.1
The tool is mandatory when working on the following Ford engines: 1.0 EcoBoost, 1.0 Duratec, 1.1 Duratec, 2.0 Duratorq-TDCi, 2.0 EcoBlue Diesel.
OEM: 303-1611, 303-1611-01, 303-1611-02.
Models:
Ford B-Max (2012-2018).
Ford C-Max (2012-2018).
Ford Grand C-Max (2017-2018).
Ford EcoSport (2015-2019).
Ford Fiesta (2012-2019).
Ford Focus (2012-2018).
Ford Mondeo (2015-2018).
Ford Transit Courier (2014-2020).
Ford Transit Connect (2013-2018).
Ford Grand Tourneo Connect (2013-2018).
Ford Tourneo Courier (2014-2020).
Engine Codes:
M1DA, M1DD, M1JA, M1JC, M1JE, M1JH, M1JJ, M1CA, M1CB, M2DA, M2DB, M2DC, M2GA, M2GB, P4JA, P4JB, P4JC, P4JD, SFCA, SFCB, SFCC, SFCD, SFDB, SFJA, SFJB, SFJC, SFJD, XMJA, XMJB, XMJC, XMJD, YYJA, YYJB.
Torque Wrench ”Werkstad” 1”DR 200-1000Nm
Torque Wrench ”Werkstad” 1/2”DR 40-210Nm
Torque Wrench ”Werkstad” 1/2”DR 50-350Nm
Torque Wrench ”Werkstad” 3/4”DR 100-500Nm
Torque Wrench ”Werkstad” 3/4”DR 150-800Nm
Torque Wrench ”Werkstad” 3/8”DR 20-110Nm
Torque Wrench 1/2”dr 40-200NM Digital With Angle Settings
Professional workshop grade torque wrench suitable for daily use.
Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels.
Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited.
Space for up to 5 user presets.
Reversible with 72tooth ratchet.
Supplied with test certificate.
Torque: 40 - 200 Nm.
Length: 650mm.
Drive 1/2''.
Angle Range 0-360?.
Accuracy: /- 2%.
Resolution: 0.1Nm?(0.1lb-ft).
Preset: 10.
Memory (Torque): 100(10memory for each preset).
Memory (Angle): 50.
Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m).
Mode: Trace / Peak.
Indicators: LED?& Buzzer.
Battery 3pcs * AAA.
Auto shut off: 60seconds.
Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F).
Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F).
Operating relative humidity: 15-90% noncondensing.
Torque Wrench 1/2”dr 68-340NM Digital With Angle Settings
Professional workshop grade torque wrench suitable for daily use.
Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels.
Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited.
Space for up to 5 user presets.
Reversible with 72tooth ratchet.
Supplied with test certificate.
Torque: 68 - 340 Nm.
Length: 650mm.
Drive 1/2''.
Angle Range 0-360?.
Accuracy: /- 2%.
Resolution: 0.1Nm?(0.1lb-ft).
Preset: 10.
Memory (Torque): 100(10memory for each preset).
Memory (Angle): 50.
Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m).
Mode: Trace / Peak.
Indicators: LED?& Buzzer.
Battery 3pcs * AAA.
Auto shut off: 60seconds.
Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F).
Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F).
Operating relative humidity: 15-90% noncondensing.
Torque Wrench 3/8”dr 20-100NM Digital With Angle Settings
Professional workshop grade torque wrench suitable for daily use.
Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels.
Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited.
Space for up to 5 user presets.
Reversible with 72tooth ratchet.
Supplied with test certificate.
Torque: 20 - 100 Nm.
Length: 405mm.
Drive 3/8''.
Angle Range 0-360?.
Accuracy: /- 2%.
Resolution: 0.1Nm?(0.1lb-ft).
Preset: 10.
Memory (Torque): 100(10memory for each preset).
Memory (Angle): 50.
Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m).
Mode: Trace / Peak.
Indicators: LED?& Buzzer.
Battery 3pcs * AAA.
Auto shut off: 60seconds.
Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F).
Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F).
Operating relative humidity: 15-90% noncondensing.
Torque Wrench 3/8”dr 27-135NM Digital With Angle Settings
Professional workshop grade torque wrench suitable for daily use.
Includes a built in LCD read out with LED, sound and vibration alarms to indicate correct torque levels.
Designed with an angle mode making angle gauges redundant saving time and producing accurate results. Cumulative angle measurements for use when space is limited.
Space for up to 5 user presets.
Reversible with 72tooth ratchet.
Supplied with test certificate.
Torque: 27 - 135 Nm.
Length: 405mm.
Drive 3/8''.
Angle Range 0-360?.
Accuracy: /- 2%.
Resolution: 0.1Nm?(0.1lb-ft).
Preset: 10.
Memory (Torque): 100(10memory for each preset).
Memory (Angle): 50.
Measurements Unit: (Nm. Lb-ft. In-ft. Kg-m).
Mode: Trace / Peak.
Indicators: LED?& Buzzer.
Battery 3pcs * AAA.
Auto shut off: 60seconds.
Operating ambient temperature:-10?C-60 ?C ?F-139.9 ?F).
Storage temperature: -20 ?C -70 ?C (-4 ?F-57.9 ?F).
Operating relative humidity: 15-90% noncondensing.
Torsion Socket Set; 110nm, 17, 19, 21mm, 1/2”dr
Torsion sockets which allow torque of up to 80ft lbs (108Nm) when used with an air impact wrench.
Prevents the over tightening of wheel nuts.
Manufactured from Chrome Molybdenum.
Profile: 6-Point.
*Please note always use a Torque Wrench to check the torque*.
Sizes:
60076-17-WW 17mm.
60076-19-WW 19mm.
60076-21-WW 21mm.
Torx Bit Socket Set, Extra-Low Profile, S2 Steel, T10-T55