Showing 280–288 of 307 results

Subframe Locating Pins For VAG Group

£33.47 Ex. VAT
Primary Used on a variety of VA Model Vehicles Including Volkswagen Scirocco 09-. EOS (06), Golf (09), Golf Plus (05), Jetta (04-06), Polo (02), Fox (06), Passat (06), Passat CL (09) and Audi A3 (04), TT (07) and A4 (01). On some vehicles in the Volkswagen Audi Group the sub-frame needs to be removed to service the suspension bushes, when removing the clutch, changing the engine, servicing the wheels, steering, stabilizer bar or control arms. These pins are screwed into the sub-frame and used to guide it back into place once the task is complete. Care should be taken to bolt back diagonally and to the manufacturer's recommended torque. Two sizes are available: The first an M12 can be fitted to Volkswagen Scirocco (09), EOS (06), Golf (09), Golf Plus (05), Jetta (4-06) Polo (02), Fox (06), Passat (06), Passat CL (09), Audi A3 (04), TT (07) and A4 (01) - OEM T10096 (Sub-frame Locating Pins - Volkswagen and Audi Group (Part No 4722)). The second size an M14 is primarily used for the new Volkswagen Crafter - OEM T10227 (Part No 4840).

Thin Walled Lambda Sensor Socket 22mm – Ford

£22.22 Ex. VAT
For use on the shrouded Lambda sensor sensors found on Ford Fiesta 1.25 from 2008 to 2016. Allows Access to the Lambda Sensor which is hampered by a tight fitting heat shield. Slotted 22mm x 119mm long x 1/2''D Lambda socket.

Torque Multiplier Set 1”dr

£177.19 Ex. VAT
For loosening stuck wheel nut sockets on trucks and vans. Maximum torque 3200 Nm. Gear ratio 1:56. Includes 7 sockets in sizes: 24, 27, 30, 32, 33, 36, 38mm.

Torque Multiplier Set Ford 1.0 EcoBoost

£345.00 Ex. VAT
This torque multiplier set allows the correct mounting position and correct tightening sequence to be applied to the crankshaft pulley bolts. The torque multiplier has a gear ratio of 5.1 The tool is mandatory when working on the following Ford engines: 1.0 EcoBoost, 1.0 Duratec, 1.1 Duratec, 2.0 Duratorq-TDCi, 2.0 EcoBlue Diesel. OEM: 303-1611, 303-1611-01, 303-1611-02. Models: Ford B-Max (2012-2018). Ford C-Max (2012-2018). Ford Grand C-Max (2017-2018). Ford EcoSport (2015-2019). Ford Fiesta (2012-2019). Ford Focus (2012-2018). Ford Mondeo (2015-2018). Ford Transit Courier (2014-2020). Ford Transit Connect (2013-2018). Ford Grand Tourneo Connect (2013-2018). Ford Tourneo Courier (2014-2020). Engine Codes: M1DA, M1DD, M1JA, M1JC, M1JE, M1JH, M1JJ, M1CA, M1CB, M2DA, M2DB, M2DC, M2GA, M2GB, P4JA, P4JB, P4JC, P4JD, SFCA, SFCB, SFCC, SFCD, SFDB, SFJA, SFJB, SFJC, SFJD, XMJA, XMJB, XMJC, XMJD, YYJA, YYJB.

Torque Wrench ”Werkstad” 1”DR 200-1000Nm

£664.31 Ex. VAT
Reversible ratchet with automatic release via ''click signal''. Torque adjustable by stopping device. Delivered with calibration certificate. Overall length: 1195mm. High precision.

Torque Wrench ”Werkstad” 1/2”DR 40-210Nm

£110.81 Ex. VAT
Reversible ratchet with automatic release via click signal. Torque adjustable by stopping device. Delivered with calibration certificate. Overall Length: 460.8mm.

Torque Wrench ”Werkstad” 1/2”DR 50-350Nm

£133.03 Ex. VAT
Reversible ratchet with automatic release via click signal. Torque adjustable by stopping device. Delivered with calibration certificate. Overall Length: 522.6mm.

Torque Wrench ”Werkstad” 3/4”DR 100-500Nm

£360.28 Ex. VAT
Reversible ratchet with automatic release via click signal. Torque adjustable by stopping device. Delivered with calibration certificate. Overall length: 840mm.

Torque Wrench ”Werkstad” 3/4”DR 150-800Nm

£553.50 Ex. VAT
Reversible ratchet with automatic release via ''click signal''. Torque adjustable by stopping device. Delivered with calibration certificate. Overall length: 1195mm. High precision.