Induction Heater Kit EU Plug
Flameless rapid heat conduction reduces the risk of accidents & potential damage.
Reduces damaging the bolt and material around the equipment.
Can reach up to 500 degrees centigrade within a minute.
1 x 18mm coil(diameter of bore) (Length 20cm).
1 x 22mm coil(diameter of bore) (Length 20cm).
1 x 28mm coil(diameter of bore) (Length 20cm).
1 x 1.1m Flexible Soft Coil.
EU Plug Version.
Induction Heater Kit EU Plug 2
Principle of operation:
There is an alternating magnetic field.
The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up.
Allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch.
Within the shortest possible time, e.g. rusty nuts are heated and can be loosened.
Using for e.g. ball joint pinch bolts and other items on axle and engine.
Also for heating components such as bearings.
Includes the following induction coils:
Inductive coil 19 mm, 220 mm long (for Ø 10-16 mm).
Induction coil 27 mm, 220 mm long (for Ø 17-24 mm).
Induction coil 50 mm, 235 mm length (for heating small surfaces).
Formless coil, 780 mm, for heating of components (bearings, etc.).
Power supply: ~230V (50-60Hz).
Current: 7.5 Amps.
Max. power: 1.5 kw.
Protection class IP20.
Dimensions: 200 x 140 x 75mm.
Weight 4.5 Kg.
Induction Heater Kit UK Plug
The best way to loosen stuck bolts and parts without the need to cut or drill.
Flameless rapid heat induction reduces the risk of accidents & potential damage.
Reduces damaging the bolt and material around the equipment.
Can reach up to 500 degrees centigrade within a minute.
1 x 18mm coil(diameter of bore) (Length 20cm).
1 x 22mm coil(diameter of bore) (Length 20cm).
1 x 28mm coil(diameter of bore) (Length 20cm).
1 x 1.1m Flexible Soft Coil.
UK Plug Version.
Induction Heater Kit UK Plug 2
Principle of operation:
There is an alternating magnetic field.
The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up.
Allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch.
Within the shortest possible time, e.g. rusty nuts are heated and can be loosened.
Using for e.g. ball joint pinch bolts and other items on axle and engine.
Also for heating components such as bearings.
Includes the following induction coils:
Inductive coil 19 mm, 220 mm long (for Ø 10-16 mm).
Induction coil 27 mm, 220 mm long (for Ø 17-24 mm).
Induction coil 50 mm, 235 mm length (for heating small surfaces).
Formless coil, 780 mm, for heating of components (bearings, etc.).
Power supply: ~230V (50-60Hz).
Current: 7.5 Amps.
Max. power: 1.5 kw.
Protection class IP20.
Dimensions: 200 x 140 x 75mm.
Weight 4.5 Kg.
Induction Mate
Induction Mate™'s Flameless Technology
This induction heater is ideal for bolt removal. Usually during machine repair old bolts & nuts can get stuck & are extremely difficult to remove. The specially designed Induction Mate makes a tough job easy compared to the traditional method using dangerous flames.
30 Second Super Fast Heat Up
The Induction Mate™ is extremely reliable and saves time, with its 30 second heating up time, allowing to get the job done in half the time.
Bright LED Lighting
Designed with LED Light to improve visibility during the job or also great for use within confined areas where its harder to locate the bolt.
Multiple Coils Included Various sized coils to suit different bolt sizes, 18mm, 22mm, 28mm in diameter and all with a length of 20cm. Flexible soft coil also included,1 meter long.
Time Saving Rotating Locking Feature The Induction Mate™ has a specific feature which allows the user to replace the coil quickly then easily locking it into place by twisting the red rotating lock. To unlock it simply rotate the locking function back to release the coil.
Handle Locking Feature
Provides the option to remove the handle for flexibility and ease of use.
Other Specifications
Input Voltage: 220V 50/60Hz.
Input Current: 4A.
Output Power: 500-900W.
Output Voltage: 40V.
Output Current: 180A.
Induction Rope Wire for Induction Heater
Intelligent High Capacity Booster Pack; 12/24 Volt, 40000mAh
Providing a starting aid for a car with a defective battery is not without risk. During the connection of the terminals high peak voltages can occur with a devastating effect on the car electronics. Welzh intelligent booster has built in electronic safety features to avoid any electrical damage, with its advanced 8-point protection system ideal for keeping your clients components safe during frequent professional use.
Compatibility: 99% Vehicle Coverage.
Compact Size: 245 x 240 x 100mm.
Voltage: 5 (USB) / 12 / 24.
Power Efficiency: 95%.
Capacity: 40,000 mAh.
Lightweight: 2.4 kg.
Max Amps: 2600.
LED Magnetic Tray
Linch Pin Assortment – 50-Pieces
Magnetic Air Tools Holder
Magnetic Tray
Magnetic Tray Double
Mapp Hand Torch
High intensity flame with multi-applications of brazing, solder and heating.
Regulated valve helps ensure consistent flame despite angle of operation or temperature.
Lock button to keep torch lit.
Discovery CON, NBR, SUP.
Variable flame control knob.
Works with Mapp gas which burns 33% faster than propane gas.
Cast aluminium body.
Instant on/off start button.
Self-Lighting Torch.
Brass adjustable flame control knob.
Ergonomic handle for comfort.
Mechanics Foldable Work Mat
Mechanics Work Gloves, Size: L
Mechanics Work Gloves, Size: M ”Green”
Mechanics Work Gloves, Size: M ”Orange”
Mechanics Working Kneel Mat With EVA Technology & LED Lighting
Mechanics Working Mat With EVA Technology
Mechanics Working Mat With EVA Technology
Multi Purpose Mechanics Vice 5”
Nox Sensor Tap M20X1.5
Damage Free Restoration
The removal of the NOX sensor usually causes damage to the threads as a normal tap is too long, and it might be placed at an angle that provides the new sensor with an incorrect mounting position within the exhaust. The damage can also be caused by the high variation in temperature and carbonization.
The WELZH tap allows for damage free restoration of the NOX sensor hole thread, with the alignment guides ensuring it is at the correct angle.
Extra Short
Can be used with a socket or ratchet for hard to reach areas.
Time and Money Saver
No need for a new exhaust system.
Universal
For diesel particulate filter, any exhaust sensors, and those in a catalytic convertor.
Plier Mate
Porta Power Kit; 10-Ton
For special operations on car bodies and fenders including lifting, pushing, pulling, straightening, spreading & bending tasks in auto body & frame repair.
Base features 90 degree V-base design, serrated saddle, male thread adapter, assorted extension tubes.
Includes hand pump, hose, cylinder ram, spreader ram, and rubber head.
75 mm hydraulic cylinder pressing width.
350 mm hydraulic pump length.
Maximum pressure: 10 tons.
Porta Power Kit; 4-Ton
For special operations on car bodies and fenders including lifting, pushing, pulling, straightening, spreading & bending tasks in auto body & frame repair.
Base features 90 degree V-base design, serrated saddle, male thread adapter, assorted extension tubes.
Includes hand pump, hose, cylinder ram, spreader ram, and rubber head.
75 mm hydraulic cylinder pressing width.
350 mm hydraulic pump length.
Maximum pressure: 4 tons.
Press for Workshops; 10 ton
Ideal for removal and installation of bearings, bushings, etc.
Can be used on work pieces up to 345 mm wide & 170-330mm tall.
Suitable for fixed mounting on workbenches.
Dimensions: (H) 1075 x (W) 620 x (D) 450mm.
Can be used on work pieces up to 345mmwide & 170-330mm tall.
Stroke of hydraulic cylinder: 90mm.
Add a Universal Press Support (40017-WW) to expand the amount of applications.
3-way adjustable support beam.
Professional Tool Cart
3 large shelves with side compartments on the upper shelf for quick access to small parts.
Shelves compatible with range of Welzhs foam storage trays & kits.
Light-weight plastic construction for easy manoeuvrability.
Made from high quality materials for a robust trolley.
Heavy duty castor wheels with x2 brakes.
Dimensions: 820*455*1045mm.
Puller Set 2 & 3 Legged; 12-Piece Universal
Puller Set 2 & 3 Legged; Internal & Eternal
Versatile Set
High-quality set designed for removing gears, hubs, ball races, bearings, pulleys, and sprockets.
Includes 3-legged tools suitable for various applications.
Durable and Adjustable Construction
Features double-ended, adjustable, and reversible legs secured with nuts and bolts at the joints.
Made from drop-forged chrome vanadium steel for strength and longevity.
Suitable for both internal and external applications with a fully adjustable design.
Enhanced Efficiency and Protection
Hex head forcing screws compatible with ratchets or spanners.
Swivel thrust plates on larger sizes prevent damage to shaft ends.
Can function as a 3 or 2-legged puller, offering versatility for various tasks.