Showing 73–96 of 198 results

Induction Heater Kit EU Plug

£758.81 Ex. VAT
Flameless rapid heat conduction reduces the risk of accidents & potential damage. Reduces damaging the bolt and material around the equipment. Can reach up to 500 degrees centigrade within a minute. 1 x 18mm coil(diameter of bore) (Length 20cm). 1 x 22mm coil(diameter of bore) (Length 20cm). 1 x 28mm coil(diameter of bore) (Length 20cm). 1 x 1.1m Flexible Soft Coil. EU Plug Version.

Induction Heater Kit EU Plug 2

£969.19 Ex. VAT
Principle of operation: There is an alternating magnetic field. The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up. Allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch. Within the shortest possible time, e.g. rusty nuts are heated and can be loosened. Using for e.g. ball joint pinch bolts and other items on axle and engine. Also for heating components such as bearings. Includes the following induction coils: Inductive coil 19 mm, 220 mm long (for Ø 10-16 mm). Induction coil 27 mm, 220 mm long (for Ø 17-24 mm). Induction coil 50 mm, 235 mm length (for heating small surfaces). Formless coil, 780 mm, for heating of components (bearings, etc.). Power supply: ~230V (50-60Hz). Current: 7.5 Amps. Max. power: 1.5 kw. Protection class IP20. Dimensions: 200 x 140 x 75mm. Weight 4.5 Kg.

Induction Heater Kit UK Plug

£758.81 Ex. VAT
The best way to loosen stuck bolts and parts without the need to cut or drill. Flameless rapid heat induction reduces the risk of accidents & potential damage. Reduces damaging the bolt and material around the equipment. Can reach up to 500 degrees centigrade within a minute. 1 x 18mm coil(diameter of bore) (Length 20cm). 1 x 22mm coil(diameter of bore) (Length 20cm). 1 x 28mm coil(diameter of bore) (Length 20cm). 1 x 1.1m Flexible Soft Coil. UK Plug Version.

Induction Heater Kit UK Plug 2

£969.19 Ex. VAT
Principle of operation: There is an alternating magnetic field. The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up. Allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch. Within the shortest possible time, e.g. rusty nuts are heated and can be loosened. Using for e.g. ball joint pinch bolts and other items on axle and engine. Also for heating components such as bearings. Includes the following induction coils: Inductive coil 19 mm, 220 mm long (for Ø 10-16 mm). Induction coil 27 mm, 220 mm long (for Ø 17-24 mm). Induction coil 50 mm, 235 mm length (for heating small surfaces). Formless coil, 780 mm, for heating of components (bearings, etc.). Power supply: ~230V (50-60Hz). Current: 7.5 Amps. Max. power: 1.5 kw. Protection class IP20. Dimensions: 200 x 140 x 75mm. Weight 4.5 Kg.

Induction Mate

£555.00 Ex. VAT
Induction Mate™'s Flameless Technology This induction heater is ideal for bolt removal. Usually during machine repair old bolts & nuts can get stuck & are extremely difficult to remove. The specially designed Induction Mate makes a tough job easy compared to the traditional method using dangerous flames. 30 Second Super Fast Heat Up The Induction Mate™ is extremely reliable and saves time, with its 30 second heating up time, allowing to get the job done in half the time. Bright LED Lighting Designed with LED Light to improve visibility during the job or also great for use within confined areas where its harder to locate the bolt. Multiple Coils Included Various sized coils to suit different bolt sizes, 18mm, 22mm, 28mm in diameter and all with a length of 20cm. Flexible soft coil also included,1 meter long. Time Saving Rotating Locking Feature The Induction Mate™ has a specific feature which allows the user to replace the coil quickly then easily locking it into place by twisting the red rotating lock. To unlock it simply rotate the locking function back to release the coil. Handle Locking Feature Provides the option to remove the handle for flexibility and ease of use. Other Specifications Input Voltage: 220V 50/60Hz. Input Current: 4A. Output Power: 500-900W. Output Voltage: 40V. Output Current: 180A.

Induction Rope Wire for Induction Heater

£44.44 Ex. VAT
For heating flanges, bearing housing, shafts, gears, exhaust connections, etc. Malleable, therefore universal application. Wire diameter: 4mm. Wire length: 800mm.

Intelligent High Capacity Booster Pack; 12/24 Volt, 40000mAh

£526.22 Ex. VAT
Providing a starting aid for a car with a defective battery is not without risk. During the connection of the terminals high peak voltages can occur with a devastating effect on the car electronics. Welzh intelligent booster has built in electronic safety features to avoid any electrical damage, with its advanced 8-point protection system ideal for keeping your clients components safe during frequent professional use. Compatibility: 99% Vehicle Coverage. Compact Size: 245 x 240 x 100mm. Voltage: 5 (USB) / 12 / 24. Power Efficiency: 95%. Capacity: 40,000 mAh. Lightweight: 2.4 kg. Max Amps: 2600.

Jump Leads; Heavy Duty, 6m, 800 amp

£50.34 Ex. VAT
Rated Voltage: 12/24V DC. 800AMP/50MM². Length: 6 Meters.

LED Magnetic Tray

£22.22 Ex. VAT
The magnet supplied is very strong with a rubber covering to stop scratches to potentially expensive parts. 150 mm in diameter with a stainless steel finish. Perfect when working on vehicles with small parts. The versatile Tri-LED light prove extremely useful when space is an issue.

Linch Pin Assortment – 50-Pieces

£22.22 Ex. VAT
Galvanized & Zinc coated. Includes: Linch pin 16 x 4.5mm. Linch pin 18 x 6.0mm. Linch pin 6 x 8.0mm. Linch pin 10 x 11.0mm.

Magnetic Air Tools Holder

£44.44 Ex. VAT
Holds air impact wrenches, wheel nut sockets and torque. Wrenches on lifting platforms. 2 strong magnets. 15 kg lifting capacity.

Magnetic Tray

£17.16 Ex. VAT
The magnet supplied is very strong with a rubber covering to stop scratches to potentially expensive parts. 150 mm in diameter with a stainless steel finish. Perfect when working on vehicles with small parts.

Magnetic Tray Double

£22.22 Ex. VAT
The magnet supplied is very strong with a rubber covering to stop scratches to potentially expensive parts. Stainless steel finish. Perfect when working on vehicles with small parts. Size: 240 x 140mm.

Mapp Hand Torch

£66.66 Ex. VAT
High intensity flame with multi-applications of brazing, solder and heating. Regulated valve helps ensure consistent flame despite angle of operation or temperature. Lock button to keep torch lit. Discovery CON, NBR, SUP. Variable flame control knob. Works with Mapp gas which burns 33% faster than propane gas. Cast aluminium body. Instant on/off start button. Self-Lighting Torch. Brass adjustable flame control knob. Ergonomic handle for comfort.

Mechanics Foldable Work Mat

£28.13 Ex. VAT
Four way folding mat. Size: 1800 x 430mm x 100mm. Head/neck rest for comfort. Handles for manoeuvrability & storage.

Mechanics Knee Protection Matt With EVA Technology

£22.22 Ex. VAT
Dimensions: 480 x 320 x 36mm. Oil, acid and fuel resistant. EVA foam.

Mechanics Work Gloves, Size: L

£11.25 Ex. VAT
Ideally suited for automotive, workshop & industrial work. Coated palm and finger area ensures reliable grip. Velcro band for strong secure fit. Professional quality materials. Size: Large.

Mechanics Work Gloves, Size: M ”Green”

£11.25 Ex. VAT
Ideally suited for automotive, workshop & industrial work. Coated palm and finger area ensures reliable grip. Velcro band for strong secure fit. Professional quality materials. Size: Medium.

Mechanics Work Gloves, Size: M ”Orange”

£11.25 Ex. VAT
Ideally suited for automotive, workshop & industrial work. Coated palm and finger area ensures reliable grip. Velcro band for strong secure fit. Professional quality materials. Size: Medium.

Mechanics Working Kneel Mat With EVA Technology & LED Lighting

£28.13 Ex. VAT
Made from EVA oil and acid resistant foam. Fitted with super bright LED strips. Ideal for working under vehicles where light can be an issue. Dimensions: 460x270x30mm.

Mechanics Working Mat With EVA Technology

£60.35 Ex. VAT
Dimensions: 1150 x 550 x 36mm. Acid Resistant EVA foam. Extra large size makes this perfect when work under vehicles. Must have item for the workplace.

Mechanics Working Mat With EVA Technology

£60.35 Ex. VAT
Dimensions: 1150 x 550 x 36mm. Acid Resistant EVA foam. Extra large size makes this perfect when work under vehicles. Must have item for the workplace.