Air Angle Grinder; Ultra Short
Air Drill; 3/8” Keyless Chuck
Air Eccentric Grinder; Including Dust Extraction
With air suction hose and dust bag for collecting the grinding dust.
grinding wheel adaptor with 6 suction holes.
Sanding pad: Ø 152mm.
Free speed: 10000 rpm.
Air inlet: 6.3 mm (1/4'').
air suction hose 10 mm (3/8'').
For surface polishing.
Air consumption 142 l/min.
Working pressure 6.3 bar.
Drive shaft thread: m8 x 1.0.
Air Hammer Kit; Composite Including 7-Piece Chisel Set
Low Vibration air Hammer.
Suitable for Professional workshop use.
Includes Quick Release Chuck.
Contents Includes 4-Piece Chisel Set i.e., Panel cutter, Bush Splitter, Spot Weld Splitter, Piercing Cutter.
Composite Ergonomic Housing.
Technical Information: Air Consumption, 179 L/min, Strokes, 67 mm, Chisel Shanks; Round 10mm, Length 170mm.
Air Installation Tool For CV Boot + Model
For the installation of CV boots without removing the drive shaft.
New + Model allows use on the more popular larger sized boots.
Jaw opening now to a maximum of 150mm.
New ergonomic handle design with built in hand guard.
Saves huge amounts of time compared to traditional methods.
Maximum Air Pressure: 116 PSI.
Joint Diameter: 150mm.
Air Inlet: 1/4" BSP.
Weight: 2 kg.
Designed & Made in the UK
Air Installation Tool For CV Boots
Air Nibbler
Air Pot Rivet Gun
Air Ratchet; 1/2”dr
Air Ratchet; 1/2”dr Heavy Duty Composite Housing
Air Ratchet; 1/4”dr, Mini Type
Air Ratchet; 3/8”dr
Air Ratchet; 3/8”dr Heavy Duty Composite Housing
Air Ratchet; 3/8”dr, Mini Type
Air Ratchet; Impact Type, 3/8”dr
Angled Impact Wrench; Air, 1/2”dr, 680nm (The Beast)
Body Saw; Air Operated
Strokes per min.: max. 9000.
Sawing depth 4 cm.
2 saw blades included.
Working pressure: 6.3 Bar (90 PSI).
Air inlet: 1/4''
Air consumption: 51 l/min (1.8 CFM).
Weight: 0.65 Kg.
Noise level: LpA = 88.15 dB (A), LwA = 99.15 dB (A).
Vibration level: ahd = 15.06 m/s², K = 1.99 m/s²
Hose inner diameter: (recommended) 10 mm (3/8“).
Bottle Jack; Mini-Jack Mate Air & Hydraulic 20-Ton
Butterfly Gun; 3/8”
Cut Off Tool Composite, Extra Long, 310mm
Cut Off Tool: Composite
Die Grinder 6mm Composite 170mm
Die Grinder 6mm Extra Long Shaft Composite 340mm
Die Grinder 90° Angle Composite
Die Grinder Micro Type, Pneumatic
The cutting edge WELZH MICRO DIE GRINDER has been developed for use in restricted access areas for the automotive industry.
Incorporating balanced precision handling due to the light weight composite design.
Includes 10 Tungsten Micro Burrs (3020-1-WW).
Supplied In EVA Foam & Protective case.
Precision Cutting, Milling & Grinding.
Anti-vibration and low sound level.
Length: 135mm.
70, 000 RPM.
Die Grinder; Mini Type (Ultra Short)
Die Grinder; Ultra Short
Drill With Keyless Chuck; Air Operated, 3/8”, Angled
For use when drilling, grinding, polishing to normal and not hard to reach places.
Infinitely variable speed control by trigger from 0 - 1500 U / min.
for one hand operation with ergonomic shape.
Air exhaust through the handle rear.
also for right-angle cutting of bars.
Forward / reverse switchable.
10mm keyless chuck.
Drilling in steel up to 10mm.
Stable head.
Specifications:
Chuck by 3 triple steel jaws 0, 8 - 10mm.
Length of unit: 210mm.
Height of head type: manual incl chuck: 97mm.
Speed, continuously adjustable: 0 - 1500 / min.
Recommended hose diameter: 3/8''.
Working pressure: 6, 3 bar (90psi).
Noise declared value LWA: 95 dB.
Weight: 1468 g.
Air consumption: l / min: 113.
Flap Disk Welzh Slotted, Aluminum Oxide 40 Grit ;115 mm (20 per Box)
Welzh Slotted Flap Disk have been innovatively engineered to see through whilst Grinding which allows for superior working compared with standard flap disk, Alows even grinding results. Ideal for processing thin metal sheets. Prevents undesired excessive grinding Reduction of processing faults. Better surface quality as a result of more targeted work. Cool grinding due to fan effect. Reduction of temperature on the surface prevents undesired blue colouring of the workpiece. Good, steady guidance. Notice: When only wood or plastics are ground, the disc must be cleaned by grinding on a sharp-edged iron tool. General steel construction: * Welding seam preparation and post-processing. * Derusting. * Removal of scale (in small quantities). * Grinding of wrought ironwork (grills, railings, banisters handrails). * Removal of excess zinc on weld seams before plastic coating. Stainless steel processing: * Pipeline construction, tank and container construction. * Apparatus construction (chemical industry). * Plant construction, e.g. brewing and food industry. * Boat building. Aluminium processing (all non-ferrous metals): * Special vehicles, such as silo vehicles, ambulances, fire engines etc. * Ship-building. * Aircraft construction. Agricultural machinery: Sharpening of blades (lawn mowers, reciprocating finger bar mowers). Body construction.??Accident repairs: * Paints and filler compounds, MIG solder seams. * Special vehicle construction (lorry attachments, servicing, wearing parts for bulk material transporters). Wood and FRP processing. Precise surfaces or edge corrections.
Flap Disk Welzh Slotted, Aluminum Oxide 60 Grit ;115 mm (20 per Box)
Welzh Slotted Flap Disk have been innovatively engineered to see through whilst grinding which allows for superior working compared with standard flap disk.
Alows even grinding results. Ideal for processing thin metal sheets.
Prevents undesired excessive grinding Reduction of processing faults.
Better surface quality as a result of more targeted work.
Cool grinding due to fan effect.
Reduction of temperature on the surface prevents undesired blue colouring of the workpiece.
Good, steady guidance.
Notice:
When only wood or plastics are ground, the disc must be cleaned by grinding on a sharp-edged iron tool.
General steel construction:
* Welding seam preparation and post-processing.
* Derusting.
* Removal of scale (in small quantities).
* Grinding of wrought ironwork (grills, railings, banisters handrails).
* Removal of excess zinc on weld seams before plastic coating.
Stainless steel processing:
* Pipeline construction, tank and container construction.
* Apparatus construction (chemical industry).
* Plant construction, e.g. brewing and food industry.
* Boat building.
Aluminium processing (all non-ferrous metals):
* Special vehicles, such as silo vehicles, ambulances, fire engines etc.
* Ship-building.
* Aircraft construction.
Agricultural machinery:
Sharpening of blades (lawn mowers, reciprocating finger bar mowers). Body construction.??Accident repairs:
* Paints and filler compounds, MIG solder seams.
* Special vehicle construction (lorry attachments, servicing, wearing parts for bulk material transporters).
Wood and FRP processing.
Precise surfaces or edge corrections.