10” Grip-Lok™; Straight Jaws Locking Plier
114-Piece Oil Sump Repair Kit
This comprehensive kit has been designed to repair damaged threads in the oil sump.
Can also be used on gearboxes and differential drain plugs.
Simply re-tap the thread and fit the corresponding sump plugs.
The range of sizes in this set allows it to be used on most of the cars and LCV on the market today.
Includes:
Tap: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5 (1 each).
Plugs: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5(6 of each).
Washers: 13, 15, 17, 20, 22 mm (various).
12-Piece Air Bag Removal Kit
12-Volt Automotive Power Surge Protector
This is a must-have piece of kit for anyone working on a vehicle when plasma cutting or welding.
You will save huge amounts of time as it allows the battery to be kept installed in the vehicle.
Prevents damage to sensitive electronics from voltage spikes.
Recommended to be used before any work on the vehicle.
Battery clips are heavy duty and fully insulated.
Housed in a hard wearing and durable case.
Complete with indicators to show for faults.
12-Volt Quick Oil,Diesel Pump
Quick and Efficient
Extraction of the pump by simply connecting the clamps to the battery.
Easy and Clean Oil Change
Hoses and hose clamps provide a clean oil changing process.
Various Applications
For changing engine oil and diesel for most vehicles (cars, motorbikes, trucks, boats, etc.).
Includes
Oil extractor pump, outlet hose, inlet hose, hose clamps, and battery clamps.
13-Piece Diesel Pump Timing Set
14-Piece Brake Thread Repair Kit M12x1.5 For VAG Group
14-Piece Universal Cooling System Tester
17-Piece Mounting Press Set
Designed for Bearing Work:
The pressure piece set is an essential for bearing, female & simmer ring work.
Includes Driver Tool:
The driver tool can be used for bearing assembly or disassembly for motorcycles, cars, trucks, tractors, electric motors, and other uses.
3 Drivers Included:
110/140/160mm.
Adapter Sizes:
10-12,12-14,14-16,15-17,16-18,
18-20,20-22,22-24,25-27,28-30,
30-34,32-36,35-40,38-42mm
17-Piece Turbo System Test Set 16-22mm
This kit has been designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system.
Professional and economic troubleshooting.
Safety valve prevents applying to much pressure preventing damage.
Features a pressure gauge, shut off valve and pressure release valve.
This kit can also be used on cooling system hoses, turbochargers, G-Chargers.
Universal use to fit most charging systems.
This kit has been designed to fit modern engines.
18-Piece Radiator Pressure Test Set
18-Piece Radio Removal Set
For the assembly of radios and radio-navigational system for most car types and brands.
Old and new radios from Blaupunkt.
Old and new radios from Becker Radios.
Grundig Original radios in Porsche models.
Original radios in Mercedes models.
Original radios in Audi models.
Original radios in Ford models.
Original radios in BMW and Opel models.
Original radios in VW models.
Original radios in new Skoda models.
18-Piece Silent Block Tool For VAG Group
For the replacement of bushes on wishbone / trailing arms, wheel bearing housing, lower wishbone downside / inside.
Allows renewing of bushes on the vehicle, when installing.
Applications:
Jetta / Synchro 2006-2012.
VW Golf 5 Plus / Variant.
4-Motion 2005-2012.
Scirocco 2009-2012.
Beetle 2012~.
Eos 2006-2012.
18-Piece Specialist Brake Calliper Kit
Various Brake Caliper Applications:
Designed to work on a wide variety of vehicle brake caliper applications by featuring most vehicle brake caliper bits and sockets.
Applications Including:
Porsche, Audi, Volkswagen, Bendix & Gerling Braking Systems: Citroen, Peugeot, Renault, Vauxhall, Opel & Smart.
2-Piece Adjustable Brake Pin Adaptors Universal Use
2-Piece Ignition Coil Puller For Opel-Vauxhall
Special design for pulling out the ignition coil.
For Opel, VW and other applications:
3- BZW,4-ZYLINDER BENZIN-EINSPRITZMOTOREN. Z.B. BEI OPEL AGILA-A, ASTRA-F, ASTRA-G, ASTRA-H, ASTRA-J, CALIBRA, COMBO, CORSA-B, CORSA-C, CORSA-D, FRONTERA-A, FRONTERA-B, INSIGNIA, MERIVA-A, MERIVA-B, OMEGA-B, SIGNUM, TIGRA-A, TIGRA-B, VECTRA-B, VECTRA-C, ZAFIRA-A, ZAFIRA-B.
Engine Codes:
LDD, LDE, LLU, LUH, LUJ, 2HO, A10XEP, A14NEL, A14NET, A14XER, X14NZ, X14SZ, X14XE, A16LET, A16XER, X16SZR, X16XE, X16XEL, A18XER, X18XE, X20SE, X20XEV, X22SE, X22XE, Y22SE, Z10XEP, Z12XE, Z12XEP, Z14XE, Z14XEL, Z14XEP, Z16LEL, Z16LER, Z16LET, Z16XE, Z16XER, Z16YNG, Z18XE, Z18XER, 20LEH, Z20LER, C22SEL.
2-Piece Tungsten Steel Scraper Set
2-Piece Universal Oil Funnel Set
21-Piece Brake Piston Wind Back Kit (INCLUDES UPDATED ADAPTORS)
21-Piece Extra Large Mounting Press Set
21-Piece Master Injector Service Kit for Bosch, Delphi, Denso, Siemens
21-Piece Oil Drain Plug Key Set
23-Piece Terminal Release Tool Set
24-Piece Radiator Pressure And Cooling System Tester
Allows easy testing for leakage in radiator system and quick change of coolant.
Unit is suitable for domestic and commercial vehicles.
Colour coded radiator test caps make it easy to choose the suitable test cap for the job.
Special design of vacuum purge & refill tool connection fits nearly all type of radiator opening.
Test Range 0-35 psi (0-2.5 bar).
The following adapters for the following vehicles are Included:
Mercedes Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper, VW, BMW, Ford, Opel, Porsche, Audi, etc.
26-Piece Engine Timing Tool Set For BMW Engines, N42, N46
This kit has been designed to allows setting and adjusting of the timing on BMW models with N42, N46, B18/-A, B20/-A/-B engine codes.
Applications: BMW: 1, 3, 5, X3, Z4 (models: E87-46-60-85-83-90-91).
Contains important tools for camshaft assembly and disassembly also for valve timing of camshafts.
Included OEM tools:
clamps for intermediate lever: OEM 119310.
bearing bridge holder: OEM 119320.
Thumbscrew: OEM 119302.
Eccentric shaft holder: OEM 119301.
Camshaft locking tool: OEM 119290.
Camshaft locking tool (inlet): OEM 119302.
Clamping tool: OEM 11940.
Spring holder: 119390.
Camshaft sensor tool: OEM 119350.
Screw: OEM 119390.
Camshaft rotation key: OEM 119270.
Crankshaft locking tool (straight): OEM 112300.
Mounting bolts 3x: OEM 119320.
Screw: OEM 119290.
Camshaft locking tool, to be used as OEM 119290.
Crankshaft locking tool (angled): OEM 119190.
Mounting bolts: OEM 119320.
Setting tool for balancer shaft: OEM 119330.
27-Piece Universal Press & Pull Sleeve Set
This precision tool kit is for extracting and drawing in bushes, bearing, seals, etc.
A widely applicable set suitable for a majority of cars, LGV and HGV. Can be used independently (manual operation) or with a suitably sized workshop press and can be reworked (e.g. recess, etc) depending on requirements.