Diesel High Pressure Pump Test Kit
Essential tool for accurately measuring the high pressure fuel circuit of diesel common rail systems.
Features 2,000bar gauge, pressure relief valve and high pressure flexible hoses.
The kit also includes a set of dummy pump regulator and injector pipe blanks.
Kit allows for a variety of tests to be conducted:
- Engine cranking/running pressure test.
- Maximum pump pressure test.
- Pump pressure regulator test.
- Injector leakage test.
Diesel Injector Extractor; For M9R
Diesel Priming & Bleeding Kit
Dipstick for Audi and VW with Oil Level Indicator
Suitable for Audi and VW models with oil level indicator in the display.
An unnoticed defect of the display without manual oil level check could cause engine failure.
Useful tool after exchange of the oil sensor or to calibrate the drivers display.
Applications:Â 3.0 and 2.7 L TDI - 2.0 TDI - 1.8 and 2.0 TFSI - 3.0 and 3.2 TFSI.
OEM Code: T40178.
Engine Valve Timing Kit; Diesel 1.4 / 1.6 / 2.0 TDi (EA288) Common Rail (Belt) – VAG
1.4/1.6/2.0TDi (EA288) Common Rail Diesel engines in:
AUDI: A1, A3, A4, A5, A6, Q2, Q3, Q5, TT.
SEAT: Ibiza, Leon, Toledo, Arona, Ateca, Alhambra, Tarraco.
SKODA: Fabia, Rapid, Yeti, Karoq, Octavia, Kodiaq, Superb.
VOLKSWAGEN: Polo, Beetle, Golf, Jetta, Scirocco, Passat, T-Roc, Touran, Sharan, Transporter, Crafter, 1.4.
Diesel Engine: CUSA, CUSB, CUTA.
1.6 Diesel Engine: CLHA, CLHB, CLHC, CRKA, CRKB, CXMA, CXXA, CXXB, DBKA.
2.0 Diesel Engine: CKFB, CKFC, CNHA, CNHC, CRBC, CRBD, CRFA, CRFC, CRLB, CRLC, CRMB, CRUA, CRVA, CRVC, CSUA, CSUB, CSUD, CSUE, CUAA, CUNA, CUPA, CUSB, CUUA, CUUB, CUUD, CUUE, CUUF, CUVA, CUVC, CUWA, CXEB, CXFA, CXGA, CXGB, CXGC, CXHA, CXHB, DDAA, DFLA, DFLD, DFMA , DFSA, DFSB, DFSC, DFSD, DFSE, DFSF.
Exhaust Expander Set 3-Piece
Exhaust Hanger Removal Plier
Exhaust Pipe Chain Cutter
Exhaust Pipe Flaring Tool
Filling Funnel for AdBlue® – Angled
Filling Funnel for AdBlue® – Straight
Fuel Filter Removal Tool For VW Crafter & Volvos
Due to the awkward and hard to reach location of the fuel filter traditional methods are ineffectiveand this can potentially damage the filter housing which can be expensive to replace.
This tool quickly removes the filter while preventing damage to it and surrounding parts.
To be used with a 1/2'' dr Hand Ratchet.
Applications:
Volvo 4 and 5 cylinder 2.0lt and 2.4lt diesel engines, V70, XC70, S40, S60, S80, XC90, V50.
Volkswagen Crafter 2.5 TDi from 2006 to 2013.
Engine Codes:
AUH, BCQ, BJJ, BJK, BJL, BJM, CEBA, CEBB, CECA, CECB.
OEM Codes:
OEM T50011 & 999 7084.
OEM filter number 2E0 127 159.
Fuel Filter Removal Tools for Ford Transit (Custom)
Fuel Filter Removal Tools for Mercedes Benz 2.2 CDI
Due to the awkward and hard to reach location of the fuel filter traditional methods are ineffectiveand this can potentially damage the filter housing which can be expensive to replace.
This tool quickly removes the filter while preventing damage to it and surrounding parts.
Suitable for use on Mercedes Models with 2.2CDI Engines.
To be used with a 1/2'' dr Hand Ratchet.
Fuel Filter Removal Tools for PSA Group 2.2 HDi Engines
Due to the awkward and hard to reach location of the fuel filter traditional methods are ineffectiveand this can potentially damage the filter housing which can be expensive to replace.
This tool quickly removes the filter while preventing damage to it and surrounding parts.
Suitable for use on all PSA Vehicle fitted with 2.2Hdi Engines.
To be used with a 1/2'' dr Hand Ratchet.
Fuel Gauge & Pump Sender Collar Wrench
Fuel Pump Sprocket Holding Kit-for Vauxhall 1.6 CDTI
Pump Sprocket Holding Kit Helps to hold the pump sprocket in place stopping the drive chain dropping into the engine causing damage and rebuild.
Kit includes slide hammer to extract the sprocket.
New sprocket blanking will be required - OEM part number 5557422.
Applications: Vauxhall Astra (2013 - 2018), GTC (2015 - 2018), Insignia (2015 - 2018), Meriva (2013 - 2017), Mokka (2014 - 2018), Zafira (2013 - 2018).
Engine Applications: 1.6 CDTI diesel, LVK/B16DTR, LVL/B16DTH, LWQ/B16DTC, LWQ/B16DTE, LWV/B16DTU.
Equivalent to OEM EN-50885 Includes slide hammer to extract the sprocket blanking plate. New sprocket blanking plate will be required - OEM part number 5557422
Fuel Return Line Tool For VAG Group
Specially designed for the removal and installation of new style injector fuel return clips which is installed on return pipes used on VAG Group Piezo injectors. To remove the clips they must be unlocked before removal or they are prone to damage. This tool unlocks and removes them with ease.
Applications:Â Audi A3 (2008-'10), A4 (2005-'12), A5 (2009-'12), A6 (2004-'15), A7 (2012-'15), Q5 (2009-'16), Q7 (2007-'09), Volkswagen Passat (2008-'12), Phaeton (2004-'07), Scirocco (2008-'11), Tiguan (2007-'11), Transporter T5 (2009-'15), Eos (2008-'10), Golf VI Estate (2008-'10), Jetta (2009-'11), SEAT Exeo (2009-'12), Skoda Yeti (2009).
Engines Codes: 2.0 (CBAA, CBAB, CAGA, CAGB, CAGC, CBDB, CBAC, CBDC, CAAA, CAAB, CAAC, CAAD, CAAE). 2.7 (BPP). 3.0 (CDUD, BMK). 4.2 (BTR).
Fuel Tank Sender Unit Spanner Set
Glow Plug Removal Set for Damaged Glow Plugs
Simplifies the assembly and disassembly and professional repair of glow plug threads extractor for fixed glow plugs.
Step drill to drill out damaged glow plugs 7 x 5.5 mm and 9 x 5.5mm.
Tap for regrooving of the glow plug threads: M8 x 1.0 mm - M10 x 1.0 mm - 6.3 mm (1/4'') x 28UNF.
Holder for thread tap with ratchet function.
E-type socket E10.