Bushing Kit for Mondeo and Galaxy S-Max
Bushing Tool Kit For VW Polo N9
Coil Spring Compressor (Wishbone Version)
Universal spring compressor for wishbone/multi-link suspension with angled jaws.
Makes it easier, safer and more convenient to position the tool correctly inside the spring.
Prevents overload and improves safely.
Handles 95% of all cars with wishbone/multi-link suspension rear example VW Touran, Citroen C3, Skoda.
Octavia, Peugeot 107.
Coilspring Compressor; Floor Standing, 1500 kg
Capacity: 1500kg.
Foot operated hydraulic unit with safety chain.
More efficient and quicker than ratchet style compressors.
Yokes are coated in a rubberised plastic to prevent damage and slippage.
Suitable for spring with a diameter of 80 to 175mm.
480mm Max Working Length.
325mm Ram Travel.
Complete with two sets of yokes.
Available separately:
819-1-WW: Replacement Hydraulic Ram.
CV Boot Clamp Pliers
CV Boot Clamp Pliers 260mm
Applications: Earless clamps fitted to axle boots on Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes Benz, Nissan, Opel, Porsche, VAG.
Length: 260mm.
Dipped handles.
Spring loaded action.
Also suitable for thermoplastic axle boots.
Suitable for clamps up to 100 mm diameter, for example Oetiker 168.
CV Boot Plier
CV Joint Puller
CV Joint Puller For LGV
Drive Shaft Squeezing Pliers
Designed to pre-tension the drive shaft circlip during assembly of the outer constant velocity joint.
Suitable for: VW, Audi, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, SEAT, Skoda, Subaru, Suzuki, Toyota Etc.
By holding the driveshaft circlip with the 8022 the outer drive shaft splines can be easily assembled onto the CV joint.
Flexi Jaw Coilspring Compressor
Ford Focus & Mazda 3 Trailing Arm Bush Removal / Installer Set
This kit can also be used with Art. 4148, 12 ton hydraulic ram.
Designed to be used in situ with vehicle offering the most efficient method of completing the task.
Make Model Applications.
Ford Focus Mk I (98-07) Remove/Install.
Ford Focus Mk II (98-07) Remove/Install.
Ford Kuga (before 08) Remove/Install.
Ford C Max MPV ((07) Remove/Install.
Mazda 3 (Chassis BK 03-09) Remove/Install.
Mazda 5 (Chassis CR, CW) Remove/Install.
Volvo V50 Estate (04-12) Remove/Install.
Volvo S40 Mk II (03-12) Remove/Install.
Ford Transit Lower Arm Bush Tool For Use With 67306-WW
For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013.
Can also be used in a workshop press for lower arms when they have been removed from the vehicle.
Designed to be used with Welzh 67306-WW press frame and Hydraulic Ram 4148-WW.
On vehicle solution with minimal strip down.
OEM Bush Numbers covered: 4042024, 4372132, 4540787 & 737213.
Applications:Â Ford Transit Mk5 & Mk6 from 2000 to 2013.
G-Hook
Heavy Duty Coilspring Compressor Left Hand Version ; 7-Piece
Left Hand Version
To be used on all left handed coil springs fitted on all modern vehicles.
Ideal on Mcpherson Struts
To be used on McPherson struts with cylindrical and conical springs.
Set Contains
1 x telescopic spindle.
3 x chuck couples.
1 x spacer for conical springs.
6 x plastic spring protectors.
Universal Applications Include
Audi, Alfa Romeo, BMW, Chrysler, Citroen, Ford, Fiat, Honda, Hyundai, Kia, Land Rover, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Seat, Subaru, Suzuki, Toyota, Vauxhall, VW and Volvo.
Heavy Duty Slide Hammer
HGV-Track Rod End Removal Tool
Specially designed to remove track rod ends found on HGVs.
Particularly useful when the tapper is separated.
Can be used with an impact wrench and 36 mm socket.
Simple solution to an awkward problem.
Because of the scale of the track rod and the build up of dirt the task can prove tricky. This simple solution allows you to use pneumatic tools to aid in the removal of the track rod saving time and unwanted effort. Must have!!!.
Hydraulic Ball Joint Splitter 12-Ton
Inter Link Coil Spring Compressor
Universal spring compressor for wishbone/multi-link suspension with angled jaws.
Makes it easier, safer and more convenient to position the tool correctly inside the spring.
Prevents overload and improves safely.
Handles 95% of all cars with wishbone/multi-link suspension rear example VW Touran, Citroen C3, Skoda Octavia, Peugeot 107.
Locking Plier; Parrot Nose 7”Inch
Master 8-Piece Replacement Spindle Set M10,M12,M14,M16
Complete Replacement Set
Contains 8 replacement spindles in sizes M10, M12, M14, M16
Includes extra stubby 228mm and extra long 450mm spindles
Supplied in EPA foam tray for convenient storage
Compatible Tools
Works with WELZH 1027-ww and 78093-ww
Fits as direct replacements for welding applications
Durable Construction
Made from quality materials for longevity
Stubby and long spindles for versatility
Master Ball-Joint Assembly Set; 23-Piece
Versatile Ball Joint Service Kit
Removes and installs ball joints, U-joints, and brake anchor pins on 2WD and 4WD cars, SUVs, and light trucks
Includes adapters for GM, Ford, and Chrysler 2WD and 4WD vehicles
Designed for maneuvering around obstructions on modern vehicles
Specialized Press Adapters
Black oxide coated press adapters resist corrosion
Cut-outs fit around obstructions for ball joint removal
Adapters designed for durability on tough pressing jobs
Complete 21-Piece Master Set
Heavy duty U-joint removal tool handles seized joints
Sturdy carrying case keeps set organized
Combination of durability, versatility, and thoughtful design