Showing 1057–1080 of 1254 results

Special Exhaust Clamp Plier For PSA

£44.44 Ex. VAT
Ideal for expanding of exhaust clamps when changing the exhaust pipe. Suitable for: Citroen, Peugeot, Renaultand the majority of vehicles. 4 locking positions forgreater use of use and wider compatibility. Opening width 20-60mm.

Specialist Automotive Sockets 10-Piece

£77.63 Ex. VAT
10S, 6pt., for Toyota idle wheel centre screw. 6S, 6pt., for Nissan & Renault clutch. 8S, 6pt., for Nissan cylinder head & balance shaft. 12S, 6pt., for Nissan cylinder head. 8TS, 3pt., for Nissan balance shaft. 10 mm, 5pt., for brake systems. 12 mm, 5pt., for Nissan fuel pump. 14 mm, 5pt., for GM & Smart Car. 19 mm, 5pt., for Peugeot, Renault & Citroen parking brake. 20 mm, 10pt., for Honda Civic lower control arm. Length: 38mm.

Stainless Steel Hose Clamps 70-Piece Assortment 8-60mm

£44.95 Ex. VAT
70 Piece Assorted Stainless Steel Hose Clamps Heavy duty, non perforated band. 201 stainless steel band and housing. Various Applications For marine, industrial, automotive, agricultural, chemical and general purposes. Damage Free Rolled edge and underside to prevent hose damage. Secure Sealing Technically advanced design for superior sealing. Flexible band for superior sealing. Conforms to hose. High strength for reliable sealing. Easy Installation Hexagonal head with screwdriver slot. Low free torque for ease of installation. Contents 10 x Hose Clamp 8 - 12mm. 10 x Hose Clamp 10 - 16mm. 10 x Hose Clamp 12 - 22mm. 10 x Hose Clamp 20 - 32mm. 10 x Hose Clamp 25 - 40mm. 10 x Hose Clamp 32 - 50mm. 10 x Hose Clamp 40 - 60mm.

Steering Wheel Level

£42.47 Ex. VAT
A must-have for quick and precisely even steering wheel assembly. Avoid reassembly of leant steering wheels that are only recognized after test drive. Much more accurate than the mechanics eyes alone.

Steering Wrack End Remover Tool 22-55mm

£56.81 Ex. VAT
For fast and professional changing of the axial joints of cars and light commercial vehicles. Automatic clamping of the joint heads. Can be used without removing the rack and pinion. Saves up to 3 hours of working time for joint heads Ø 22 - 55mm. Works with 1/2'' ratchets.

Stretch Belt Fitting Tool Dual Size Pulleys

£75.66 Ex. VAT
For use on duel size pulleys particularly with the Ford Focus. This kit has been designed especially for installing and dismantling stretch belts on double pulleys. Save huge amounts of time by installing in one action.

Strip Disk; Welzh Strip & Clean Rapid Disk 115 x 22.2mm x5 Pieces

£44.95 Ex. VAT
Easy to Use Attach the Welzh Strip & Clean disk to your angle grinder tool to remove numerous surface imperfections from many types of materials. Various Applications The Welzh Strip & Clean disk can be used on multiple ranges of materials such as metal, concrete, stainless steel & aluminium. The special synthetic resin coating clings to rust, paint, & other contaminants and easily removes them. Practical The Welzh Strip & Clean disk functions at speeds up to 13,280 rpm easily allowing the removal of the hardest areas and build top, the lightweight backing made up of fibreglass reduces the impact vibration as well as hand & arm fatigue. Other Specifications Maximum rpm: 13,200. Disk Size: 115 x 22.2 mm. Quantity: 100 pieces.

Strut Mate™ Jack-Mounted Strut Supporter

£138.94 Ex. VAT
Provides a highly efficient solution for supporting and holding the strut in place while working on the vehicle. To be used in conjunction with a transmission jack.

Suction & Filling Car Fluid Syringe

£55.41 Ex. VAT
1.5Ltr Capacity. Can be used on oil, brake fluid, transmission fluid, water and other fluids found in vehicles. Not suitable for fuel. Reduces spillage and mess.

Suction & Filling Syringe For Diesel Fuel Systems Incl 3-pc Adaptor Set

£88.59 Ex. VAT
Designed to be used on both diesel and petrol engines when extracting excess fuel from fuel lines before maintenance. Comes with 3-piece quick connectors Universal Use. Replacement seals 1200-1-WW. Reduces damage and spillage. 1.5 Litre Capacity.

Super Ultra Thin 9-Piece”LOK-TYP” Spanner Set 6-24-mm

£74.95 Ex. VAT
Special Super Ultra Thin Design For confined areas where traditional wrenches cannot reach. Ideal for working on transmissions, gas tanks or changing a wheel on a creeper seat. LOK-TYP Open End Ratcheting Mechanism Allows for turning nuts and bolts without taking the wrench off the fastener; making jobs faster and easier. Strong and Durable Alloy steel with heat treated for maximum strength. Sizes Included 6x7, 8x9, 10x11, 12x13, 14x15, 16x18, 17x19, 21x23, and 22x24mm.

Suspension Screw Extractor for VAG; 4-link Suspensions

£33.47 Ex. VAT
Special tool to remove the clamping screws on four wishbone front axles. Applications: Audi, SEAT, Skoda, VW. To be used with a air hammer. 10mm round shank. Can be used with 1070-WW vibro gun.

SuspensionMate™

£187.31 Ex. VAT
The Welzh SuspensionMate™ utilises an innovative registered design to identify and diagnose multiple suspension component failures. Allows user to positively SEE, FEEL & HEAR problem areas that are difficult or otherwise impossible to identify without specialist tools. Provides a consistent and successful testing methodology across all makes and models of vehicle allowing users to save time and money as suspension diagnostics become fast and effective. Universal application to work on 99% of all vehicle manufacturers and models. Applications: Wheel bearings Suspension Joints Ball Joints Silent Blocks and many more!

Swivel Base For Transmission Jack

£110.81 Ex. VAT
Standard European transmission jack fitting on base. Adjustable chain length for universal application.

Swivel Head Oil Filter Plier

£39.09 Ex. VAT
Specially designed jaws that swivel 180 degrees allows this tool to access oil and fuel filters in awkward and hard to reach areas. Jaw swivel: 180 degrees. Jaw range: 57 to 120mm. Long reach style.

Syringe for Fluid and Oil; 200ml

£33.47 Ex. VAT
Suitable for oil, brake fluid, water, screen wash, and many other fluids. Not suitable for fuel. 200mm capacity.

Tap Socket Set; 8-Piece

£55.41 Ex. VAT
Ideal for restricted access situations where you can't use a T-handle tap holder. These tap sockets allow for a much easier Job whilst cutting, chasing & cleaning threads. Magnetic Base allows ensures a secure hold to the taps. Can be used with a 1/4''dr or 3/8''dr Hand Ratchet. Supplied on a socket rail. Sizes: 1/4''dr sockets: 1mm, 2mm, 3mm, 4mm. 3/8''dr sockets: 5mm, 6mm, 7mm, 8mm.

Tie Rod Remover; Inner, Universal 27-42mm

£44.44 Ex. VAT
For removing the inner tie rod without dismantling the rack and pinion. Universal applications with a range of 27 to 42mm. Should be used with a 1/2 drive ratchet.

Tie Rod Spanner 4-Link Suspension On VAG Models

£63.84 Ex. VAT
For adjusting the toe-in quickly & precisely. This tool prevents the rubber connection from damage with its special bridged design. Cost and time effective. Applications: Audi A4 from `94, A6 from `00, A8 from `02, Seat Exeo from`10. Can also be used on many other VAG Group vehicles. The only tool that will fit perfectly to the tie-rod.