For the Professional Removal and Installation of the screw type lower ball joint.
Suitable Renault; Twingo, Sport 2007- Onwards
3/8'' Super Slim Socket Tool Set
£101.19 Ex. VAT
Brake Disk Lip Removal Kit
£101.19 Ex. VAT
Ball Joint Socket For Renault Twingo
£30.71 Ex. VAT
For the Professional Removal and Installation of the screw type lower ball joint.
Suitable Renault; Twingo, Sport 2007- Onwards
Description
Reviews (0)
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Injector Remover for Bosch Injectors; Diesel
Quickly and easily remove stubborn stuck diesel injectors.
Suitable for assembling and disassembling tightly fit common rail injectors.
Suitable for e.g. Mercedes CDI engines 611, 612 and 613.
Suitable for working in confined spaces due to the low support cylinder diameter.
Special tool construction allows to pull injector with high force.
Injector Removal Kit with Slide Hammer and Adapters; 14 pcs
Ball joint allows hammer to be used in confined areas.
Set includes keys and deep open profile sockets for.
Dismantling injectors, and adaptors.
Allows easy and quick removal of the injector.
Includes:
Sliding hammer with shaft and handle, weight 4400g.
Ball joint adaptors.
Adaptor (internal thread): m14 x m14 - m17 x m14, m25 x m14 - m27 x m14.
Adaptors (external thread): m27 x m14 - m20 x m14.
6-Pt socket for electrical unit 25 - 27 - 29 - 30.
10 Mm hexagon bit socket with 12.5-1/2 Drive.
40-Piece Glow Plug Removal Kit M8-M10
For removing damaged and broken glow plugs from cylinder heads.
Ideal for use where a glow plug has sheared off just below the hex, or flush with the cylinder head.
Removes 8mm & 10mm glow plugs (M8 x 1.0 thread or M10 x 1.0 thread).
6 x extractor sockets.
1 x dual size high tensile step drill.
1 x narrow pulling unit set.
1 x drill holder extension.
2 x taps.
2 x drill bits.
2 x glow plug chamber cleaning brushes.
Injector Copper Seal Kit; 150-Piece
For replacing the copper washer at the base of the injector shaft on CDI engine.
Includes 10 each of the following sizes:
Ext. Ø 13.8 mm x Int. Ø 7.3 mm, 1.4mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 1.3mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.0 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.5 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.7mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.4 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 20.0 mm x Int. Ø 9.4 mm, 0.9mm.
Injector Pump Puller; VAG Engines
Applications:Â Audi, SEAT, Skoda and VW vehicles with direct injection pump engines. Also for engines with Pump injector units.
Should be used as OEM T10133 andT10163.
Includes:
Puller for dismantling FSI injectors(T10133/1).
Puller claw for dismantling FSI injectorsT10133/2.
Sliding hammer T10133/3.
Cone for mounting the combustion chamber rings (T10133/5).
3 calibration tools for mounting the combustion chamber rings T10133/6, T10133/7, T10133/8.
Built-in pin for mounting the FSI injectorsT10133/9.
Extractor for dismantling pump-injector units.
Impact Vibration Glow Plug Removal Gun Incl Sockets 8-12mm
The impact wrench is designed to deliver low torque in 4 stages (10, 20, 30, 40 nm).
The use on vibrations and torque will allow easy removal of stuck glow plugs.
The level of torque will stop the shearing of the glow plug head.
Impact Gun: 20 to 40nm.
Deep Sockets: 8, 9, 10, 11, 12mm.
Extension Bars 50 & 100mm.
Universal Joint.
1/4'' Drive.
Injector Seat Cleaners; 17-Piece
Used to clean and de-carbonise injector seats when changing injectors.
Suitable for a wide range of vehicles.
Contents:
14mm x 14mm Flat Reamer.
15mm x 19mm Flat Reamer.
15.5mm x 15.5mm Flat Reamer.
15.5mm x 15.5mm Angled Reamer.
17mm x 17mm Angled Reamer.
17mm x 17mm Flat Reamer.
17mm x 17.5mm Flat Reamer.
17mm x 19mm Flat Reamer.
17mm x 19.5mm Flat Reamer.
17mm x 20mm Flat Reamer.
17mm x 21mm Angled Reamer.
17.5mm x 20.5mm Angled Reamer.
19mm x 21.5mm Flat Reamer.
Pilot Hex 19 x 170mm.
15.5 X 250mm Cutter.
2.5mm Hex Key.
T-handle.
Injector Sealing Plug Set, 12-Piece
12-Piece Injector Sealing Plug Set.
For sealing Injectors prior to pressure loss Testing.
Protects the Injector from contamination during Work.
Suitable For use on: Bosch, Delphi, Siemens & Denso Injectors.
Applications: Opel-Vauxhall, Mazda, Ford-Volvo, PSA Group, Mercedes-Benz, Renault, Fiat-Chrysler & Others.
Contents: 6x M12x1.50 Caps, 6x M14x1.50 Caps.
Reviews
There are no reviews yet.