Be the first to review “Diesel High Pressure Pump Test Kit” Cancel reply
Free Shipping
Die Grinder & Attachment Set
£44.95 Ex. VAT
Heavy Duty Coilspring Compressor Left Hand Version ; 7-Piece
£245.95 Ex. VAT
Diesel High Pressure Pump Test Kit
£449.95 Ex. VAT
Essential tool for accurately measuring the high pressure fuel circuit of diesel common rail systems.
Features 2,000bar gauge, pressure relief valve and high pressure flexible hoses.
The kit also includes a set of dummy pump regulator and injector pipe blanks.
Kit allows for a variety of tests to be conducted:
– Engine cranking/running pressure test.
– Maximum pump pressure test.
– Pump pressure regulator test.
– Injector leakage test.
Reviews (0)
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Universal Glow Plug Extraction Master Kit
With the top of the glow plug damaged i.e. snapped off getting the glow plug can be a very awkward and expensive task. This kit has been developed to save huge amounts of effort and costs during this common task and is a must-have innovative kit for any mechanic.
Complete kit for glow plugs electrode extraction: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25.
Includes all the necessary tools: (9 x extraction rods, 4 x glow plug guides and 1 x slide hammer) for safely removing the terminal part of the glow plug electrode without damaging the cylinder head.
40-Piece Glow Plug Removal Kit M8-M10
For removing damaged and broken glow plugs from cylinder heads.
Ideal for use where a glow plug has sheared off just below the hex, or flush with the cylinder head.
Removes 8mm & 10mm glow plugs (M8 x 1.0 thread or M10 x 1.0 thread).
6 x extractor sockets.
1 x dual size high tensile step drill.
1 x narrow pulling unit set.
1 x drill holder extension.
2 x taps.
2 x drill bits.
2 x glow plug chamber cleaning brushes.
Injector Clamping Bolt Thread Repair Kit – Mercedes Benz CDi
Injector Thread Repair kit provides the special tools required to drill out the broken bolt and fit M6 threaded inserts to allow new OEM M6 bolts to be used.
Allows the task to be performed with minimal dismantling allows the cam cover to remain in place for immense time saving.
Size M6 threaded insert fitting kit for Use on Mercedes Benz Injector clamping bolts.
For Use On: Mercedes Benz CDi engines.
Contents: M8x1.0mm Tap, 7-8mm step drill, 6mm drill, Drill guide, insert fitting tool & 5x threaded inserts.
Replacement Inserts Available under Art: 60013-1-WW.
Impact Vibration Glow Plug Removal Gun Incl Sockets 8-12mm
The impact wrench is designed to deliver low torque in 4 stages (10, 20, 30, 40 nm).
The use on vibrations and torque will allow easy removal of stuck glow plugs.
The level of torque will stop the shearing of the glow plug head.
Impact Gun: 20 to 40nm.
Deep Sockets: 8, 9, 10, 11, 12mm.
Extension Bars 50 & 100mm.
Universal Joint.
1/4'' Drive.
Injector Pump Puller; VAG Engines
Applications:Â Audi, SEAT, Skoda and VW vehicles with direct injection pump engines. Also for engines with Pump injector units.
Should be used as OEM T10133 andT10163.
Includes:
Puller for dismantling FSI injectors(T10133/1).
Puller claw for dismantling FSI injectorsT10133/2.
Sliding hammer T10133/3.
Cone for mounting the combustion chamber rings (T10133/5).
3 calibration tools for mounting the combustion chamber rings T10133/6, T10133/7, T10133/8.
Built-in pin for mounting the FSI injectorsT10133/9.
Extractor for dismantling pump-injector units.
Injector Removal Adaptors; Universal
For pulling out hard to remove diesel injectors.
To be used with our optional sliding hammers 4212-WW.
Includes the following tools:
6 adapters for installation in the injector thread.
Inside thread M20x1.5 to inside thread M14x1.0.
Inside thread M20x1.5 to outside thread M17x1.0.
Inside thread M20x1.5 to outside thread M18x1.5.
Inside thread M20x1.5 to outside thread M20x1.0.
Inside thread M20x1.5 to outside thread M25x1.0.
Inside thread M20x1.5 to outside thread M27x1.0.
3 pulling claws with inside thread M18x1.5and claw width 12, 13 and 16 mm -ball head adapter M18x1.5 to M18x1.10 mm int.
Reviews
There are no reviews yet.