Be the first to review “Diesel Injector Extractor; For M9R” Cancel reply
Free Shipping
Clutch Alignment Tool
£28.95 Ex. VAT
Difficult Access Socket Set; 3/8"dr 6-Piece
£54.95 Ex. VAT
Diesel Injector Extractor; For M9R
£184.95 Ex. VAT
Applications: M9R 2.0 DCI, Renault: trafic, Opel/Vauxhall: Vivaro, Nissan: Primaster.
Used to remove seized or corroded diesel injectors.
Reviews (0)
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Injector Removal Adaptors; Universal
For pulling out hard to remove diesel injectors.
To be used with our optional sliding hammers 4212-WW.
Includes the following tools:
6 adapters for installation in the injector thread.
Inside thread M20x1.5 to inside thread M14x1.0.
Inside thread M20x1.5 to outside thread M17x1.0.
Inside thread M20x1.5 to outside thread M18x1.5.
Inside thread M20x1.5 to outside thread M20x1.0.
Inside thread M20x1.5 to outside thread M25x1.0.
Inside thread M20x1.5 to outside thread M27x1.0.
3 pulling claws with inside thread M18x1.5and claw width 12, 13 and 16 mm -ball head adapter M18x1.5 to M18x1.10 mm int.
Injector Removal Kit with Slide Hammer and Adapters; 24-Piece
Diesel Injector Master Kit.
Suitable for the removal of Bosch / Delphi / Denso / Siemens and Pumpe Duse diesel injectors.
1.3kg Slide Hammer with 150mm Shaft.
4kg Slide Hammer with 400mm Shaft and Handle.
With various Male and Female Adaptors.
Pump Duse Injectors Adaptors.
Injector Sockets - 25, 27, 29, 30mm.
Injector Copper Seal Kit; 150-Piece
For replacing the copper washer at the base of the injector shaft on CDI engine.
Includes 10 each of the following sizes:
Ext. Ø 13.8 mm x Int. Ø 7.3 mm, 1.4mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 1.3mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.0 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.5 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.7mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.4 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 20.0 mm x Int. Ø 9.4 mm, 0.9mm.
Common Rail Flow Meter Set
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
Injector Clamping Bolt Thread Repair Kit – Mercedes Benz CDi
Injector Thread Repair kit provides the special tools required to drill out the broken bolt and fit M6 threaded inserts to allow new OEM M6 bolts to be used.
Allows the task to be performed with minimal dismantling allows the cam cover to remain in place for immense time saving.
Size M6 threaded insert fitting kit for Use on Mercedes Benz Injector clamping bolts.
For Use On: Mercedes Benz CDi engines.
Contents: M8x1.0mm Tap, 7-8mm step drill, 6mm drill, Drill guide, insert fitting tool & 5x threaded inserts.
Replacement Inserts Available under Art: 60013-1-WW.
Reviews
There are no reviews yet.