Modern vehicles fuse and relay boxes are very difficult to access due to over crowded.
The swivel jaws will allow access to the most restricted areas unlike conventional pliers.
The specially designed Tips allow to fit the relay slots or edge of the relay covers.
Mini Air Needle Scaler
£234.95 Ex. VAT
12-Piece Air Hose Connector Adaptor Set EU Fitting
£33.47 Ex. VAT
Relay Pliers, Flexible Head
£54.51 Ex. VAT
Modern vehicles fuse and relay boxes are very difficult to access due to over crowded.
The swivel jaws will allow access to the most restricted areas unlike conventional pliers.
The specially designed Tips allow to fit the relay slots or edge of the relay covers.
Description
Reviews (0)
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Injector Seat Cleaners; 17-Piece
Used to clean and de-carbonise injector seats when changing injectors.
Suitable for a wide range of vehicles.
Contents:
14mm x 14mm Flat Reamer.
15mm x 19mm Flat Reamer.
15.5mm x 15.5mm Flat Reamer.
15.5mm x 15.5mm Angled Reamer.
17mm x 17mm Angled Reamer.
17mm x 17mm Flat Reamer.
17mm x 17.5mm Flat Reamer.
17mm x 19mm Flat Reamer.
17mm x 19.5mm Flat Reamer.
17mm x 20mm Flat Reamer.
17mm x 21mm Angled Reamer.
17.5mm x 20.5mm Angled Reamer.
19mm x 21.5mm Flat Reamer.
Pilot Hex 19 x 170mm.
15.5 X 250mm Cutter.
2.5mm Hex Key.
T-handle.
Glow Plug Thread Repair Kit: M8, 9, 10, 12
For repairing the glow plug mounting thread in the cylinder head.
Includes:
5x reamer for reaming the original thread.
M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
5x taps for threaded sleeves.
M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
5x taps for trimming the original thread M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
Assembly tools for inserting the threaded sleeves.
5x threaded sleeves M8 x 1.0 (11 mm long).
5x threaded sleeves M9 x 1.0 (11 mm long).
5x threaded sleeves M10 x 1.25 (12 mm long).
5x threaded sleeves M10 x 1.0 (12 mm long).
5x threaded sleeves M10 x 1.0 (19 mm long).
5x threaded sleeves M12 x 1.25 (12 mm long).
5x threaded sleeves M12 x 1.25 (19 mm long).
5x threaded sleeves M12 x 1.25 (26 mm long).
Injector Removal Adaptors; Universal
For pulling out hard to remove diesel injectors.
To be used with our optional sliding hammers 4212-WW.
Includes the following tools:
6 adapters for installation in the injector thread.
Inside thread M20x1.5 to inside thread M14x1.0.
Inside thread M20x1.5 to outside thread M17x1.0.
Inside thread M20x1.5 to outside thread M18x1.5.
Inside thread M20x1.5 to outside thread M20x1.0.
Inside thread M20x1.5 to outside thread M25x1.0.
Inside thread M20x1.5 to outside thread M27x1.0.
3 pulling claws with inside thread M18x1.5and claw width 12, 13 and 16 mm -ball head adapter M18x1.5 to M18x1.10 mm int.
Common Rail Flow Meter Set
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
Injector Removal Kit; HDI Injectors
or use in the extraction of Bosch and Siemens HDI injectors. No need to remove the cylinders heads with this kit.
Suitable for vehicles with PSA 2.0l DW10/12 engines which can also be found on Toyota, Mazda and Hyundai models.
Included2 ball bearing puller spindles 2 Open sockets for removal of the electric unit. High performance support frame with spindle bearings.
Reviews
There are no reviews yet.