Be the first to review “Vibration Mate Injector Removal Tool” Cancel reply
Twister Air Hammer Pulling Kit
£562.44 Ex. VAT
12-Volt Quick Oil,Diesel Pump
£44.95 Ex. VAT
Vibration Mate Injector Removal Tool
£500.00 Ex. VAT
– Specially designed by WELZH to combine vibrations & Pneumatic force to allow for the easy removal of
seized injectors.
– Comes complete with a universal adaptor set that cover Bosch , Delphi , Denso, Siemens CR injectors which
has solenoid coil or screw connections.
– Covers 99% of injectors.
Reviews (0)
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Glow Plug Thread Repair Kit: M8, 9, 10, 12
For repairing the glow plug mounting thread in the cylinder head.
Includes:
5x reamer for reaming the original thread.
M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
5x taps for threaded sleeves.
M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
5x taps for trimming the original thread M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
Assembly tools for inserting the threaded sleeves.
5x threaded sleeves M8 x 1.0 (11 mm long).
5x threaded sleeves M9 x 1.0 (11 mm long).
5x threaded sleeves M10 x 1.25 (12 mm long).
5x threaded sleeves M10 x 1.0 (12 mm long).
5x threaded sleeves M10 x 1.0 (19 mm long).
5x threaded sleeves M12 x 1.25 (12 mm long).
5x threaded sleeves M12 x 1.25 (19 mm long).
5x threaded sleeves M12 x 1.25 (26 mm long).
Common Rail Flow Meter Set
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
Injector Copper Seal Kit; 150-Piece
For replacing the copper washer at the base of the injector shaft on CDI engine.
Includes 10 each of the following sizes:
Ext. Ø 13.8 mm x Int. Ø 7.3 mm, 1.4mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 1.3mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.0 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.5 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.7mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.4 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 20.0 mm x Int. Ø 9.4 mm, 0.9mm.
Injector Clamping Bolt Thread Repair Kit – Mercedes Benz CDi
Injector Thread Repair kit provides the special tools required to drill out the broken bolt and fit M6 threaded inserts to allow new OEM M6 bolts to be used.
Allows the task to be performed with minimal dismantling allows the cam cover to remain in place for immense time saving.
Size M6 threaded insert fitting kit for Use on Mercedes Benz Injector clamping bolts.
For Use On: Mercedes Benz CDi engines.
Contents: M8x1.0mm Tap, 7-8mm step drill, 6mm drill, Drill guide, insert fitting tool & 5x threaded inserts.
Replacement Inserts Available under Art: 60013-1-WW.
Injector Removal Kit; HDI Injectors
or use in the extraction of Bosch and Siemens HDI injectors. No need to remove the cylinders heads with this kit.
Suitable for vehicles with PSA 2.0l DW10/12 engines which can also be found on Toyota, Mazda and Hyundai models.
Included2 ball bearing puller spindles 2 Open sockets for removal of the electric unit. High performance support frame with spindle bearings.
Injector Remover for Bosch Injectors; Diesel
Quickly and easily remove stubborn stuck diesel injectors.
Suitable for assembling and disassembling tightly fit common rail injectors.
Suitable for e.g. Mercedes CDI engines 611, 612 and 613.
Suitable for working in confined spaces due to the low support cylinder diameter.
Special tool construction allows to pull injector with high force.
Reviews
There are no reviews yet.