17-Piece Turbo System Test Set 16-22mm
This kit has been designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system.
Professional and economic troubleshooting.
Safety valve prevents applying to much pressure preventing damage.
Features a pressure gauge, shut off valve and pressure release valve.
This kit can also be used on cooling system hoses, turbochargers, G-Chargers.
Universal use to fit most charging systems.
This kit has been designed to fit modern engines.
18-Piece Alternator Pulley Bit Set
Special Bit Set with alternator combination wrenches for assembling belt pulleys.
Spline Pulley Key, 15.0 mm, 33 teeth, bored.
Spline Pulley Key, 22.0 mm, 33 teeth, bored.
22 mm Adaptor for Belt Pulley Wrench, 30mm.
17 mm Special Adaptor, 4 mm, 30mm.
Bits, length 75 mm, external hexagon 10 mm (3/8'') drive, internal hexagon H8 and H10mm.
Bits, length 75 mm, external hexagon 10 mm (3/8'') drive, internal serration M8 - M10.
Bits, length 75 mm, external hexagon 10 mm (3/8'') drive, T-Star (for Torx) T40 and T50.
Bit Socket for Generator, 12.5 mm (1/2''), internal serration (for XZN) M10.
Bit Socket for Generator, 12.5 mm (1/2''), T-Star (for Torx) T50.
Bit Adaptor with Retaining Ball, 12.5 mm (1/2'') - internal hexagon 10 mm (3/8'').
Including adaptor for VW, Audi, Seat, BMW, Mercedes, Ford.
18-Piece Professional Parallel Pin Punch Set
18 Piece Professional Parallel Pin Punch Set
100-150-200 mm 1.5 - 9.5 mm including centre punches.
Extra Long and Thin
Hardened and coloured shaft.
Includes
8 cotter pin drives.
Length: 200 mm. 1.5, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 9.5 mm.
2 cotter pin drives.
Length: 150 mm. 8.0, 9.5 mm.
7 cotter pin drives.
Length: 100 mm. 1.5, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0 mm.
1 automatic centre punch, length: 125 mm.
18-Piece Professional Punch Set
18-Piece Radiator Pressure Test Set
18-Piece Radio Removal Set
For the assembly of radios and radio-navigational system for most car types and brands.
Old and new radios from Blaupunkt.
Old and new radios from Becker Radios.
Grundig Original radios in Porsche models.
Original radios in Mercedes models.
Original radios in Audi models.
Original radios in Ford models.
Original radios in BMW and Opel models.
Original radios in VW models.
Original radios in new Skoda models.
18-Piece Silent Block Tool For VAG Group
For the replacement of bushes on wishbone / trailing arms, wheel bearing housing, lower wishbone downside / inside.
Allows renewing of bushes on the vehicle, when installing.
Applications:
Jetta / Synchro 2006-2012.
VW Golf 5 Plus / Variant.
4-Motion 2005-2012.
Scirocco 2009-2012.
Beetle 2012~.
Eos 2006-2012.
18-Piece Specialist Brake Calliper Kit
Various Brake Caliper Applications:
Designed to work on a wide variety of vehicle brake caliper applications by featuring most vehicle brake caliper bits and sockets.
Applications Including:
Porsche, Audi, Volkswagen, Bendix & Gerling Braking Systems: Citroen, Peugeot, Renault, Vauxhall, Opel & Smart.
19-Piece 1/2”dr Torx & E-Torx Set
19-Piece Left Cutting Drill Bits 1-10MM
2-Piece Adjustable Brake Pin Adaptors Universal Use
2-Piece Ignition Coil Puller For Opel-Vauxhall
Special design for pulling out the ignition coil.
For Opel, VW and other applications:
3- BZW,4-ZYLINDER BENZIN-EINSPRITZMOTOREN. Z.B. BEI OPEL AGILA-A, ASTRA-F, ASTRA-G, ASTRA-H, ASTRA-J, CALIBRA, COMBO, CORSA-B, CORSA-C, CORSA-D, FRONTERA-A, FRONTERA-B, INSIGNIA, MERIVA-A, MERIVA-B, OMEGA-B, SIGNUM, TIGRA-A, TIGRA-B, VECTRA-B, VECTRA-C, ZAFIRA-A, ZAFIRA-B.
Engine Codes:
LDD, LDE, LLU, LUH, LUJ, 2HO, A10XEP, A14NEL, A14NET, A14XER, X14NZ, X14SZ, X14XE, A16LET, A16XER, X16SZR, X16XE, X16XEL, A18XER, X18XE, X20SE, X20XEV, X22SE, X22XE, Y22SE, Z10XEP, Z12XE, Z12XEP, Z14XE, Z14XEL, Z14XEP, Z16LEL, Z16LER, Z16LET, Z16XE, Z16XER, Z16YNG, Z18XE, Z18XER, 20LEH, Z20LER, C22SEL.
2-Piece Micro Ratchet Set
2-Piece Mini Pocket Pry Bar Set
2-Piece Tungsten Steel Scraper Set
2-Piece Universal Oil Funnel Set
2-Piece XXL Scraper Set; Tungsten Steel
Extra Long Scraper Set:
1 x 16mm edge - 300mm Length
1 x 32mm edge - 300mm Length
Long Lasting & Durable:
Made with High Quality Tungsten Steel allowing the scrap ers to be extremely durable and long lasting.
Flat Edged Tip:
For easily scraping surfaces with the strength of tungsten steel.
Ergonomic Handle:
Can be used either as a pull or push tool.
Various Uses:
Multiple use in removing carbon on exhaust systems,burned corrosion on brakes, corroded gaskets on cylinder heads,Paint & Glue plus many more uses.