21-Piece Extra Large Mounting Press Set
21-Piece Master Injector Service Kit for Bosch, Delphi, Denso, Siemens
21-Piece Oil Drain Plug Key Set
22-Piece Alternator Pulley Set
22-Piece Master Twist Socket Removal Set: Deep-Version
Welzh Master Twist Sockets
Specially designed to remove stripped, damaged and broken nuts, bolts, hex, screws, etc.
Innovatively engineered to easily extract even if they are stripped, rusted, or rounded.
Super Grip Extraction
Due to the unique Welzh Design compared with traditional socket removers, it has helical teeth that grip and won't let go; the more you turn, the tighter the socket grips! Meaning no more slipping or busted knuckles.
1/4"Dr
6mm, 6.2mm, 6.5mm, 6.7mm, 7mm, 7.2mm, 7.5mm, 7.7mm, 8mm, 8.2mm, 8.5mm, 8.7mm, 9mm, 9.2mm, 9.5mm, 10mm.
3/8"Dr
9.5mm, 10mm, 11mm, 12mm, 12.7mm, 13mm.
Material
42Cr-Mo.
23-Piece Bearing Puller Set; With Leg Extensions & Ball-End Adaptors
Bearing Puller Set:
This set includes self locking insert adaptors which allow simple removal of blind bearings.
More Effective than Traditional Pullers:
Removes a variety of blind bearings where traditional bearing & gear pullers fail to reach as easily.
Ball End Tip Adaptors:
These fit in easily to deep groove bearing races. Provides traction when turned 90? inside the bearing case for easier & quicker extraction.
Time Saving Solution:
This method helps when accessing the ball bearing isnt possible through the outer ring or through the bore.
Ball End Adaptor Sizes Included:
5, 6, 8, 9, 11, 12.5mm.
23-Piece Extension Bar Set
Comprehensive 23-Piece Extension Bar Set
Features 6 points for enhanced torque application on fasteners.
Designed to reach challenging areas, with a Universal Joint that rotates 360°.
Protective Storage
Supplied in a protective EVA Foam Tray for organized and secure storage.
Contents
Socket Extensions
for Hard to Reach Areas
375 mm Long 1/2 Inch Drive Socket Extension
250 mm Long 1/2 Inch & 3/8 Inch Drive Socket Extensions
150 mm Long 1/2 Inch, 3/8 Inch, 1/4 Inch Drive Socket Extensions
75 mm Long 1/2 Inch, 3/8 Inch, 1/4 Inch Drive Socket Extensions
38 mm Long 1/2 Inch, 3/8 Inch, 1/4 Inch Drive Socket Extensions
Universal Joints
for Hard to Reach Areas and Bypassing Obstructions
360° Rotatable 1/4 Inch Universal Joint
3/8 Inch Universal Joint
1/2 Inch Universal Joint
Socket Adapters
For Using Different Drive Size Sockets
1/4 Inch Hex to 1/4 Inch Drive Adapter
3/8" Female x 1/4" Male Adapter
1/4" Female x 3/8" Male Adapter
3/8" Female x 1/2" Male Adapter
1/2" Female x 3/8" Male Adapter
1/2" Female x 3/4" Male Adapter
Spark Plug Sockets
for Damage-Free Spark Plug Removal and Installation
5/8" Spark Plug Socket
13/16" Spark Plug Socket
23-Piece Terminal Release Tool Set
24-Piece Radiator Pressure And Cooling System Tester
Allows easy testing for leakage in radiator system and quick change of coolant.
Unit is suitable for domestic and commercial vehicles.
Colour coded radiator test caps make it easy to choose the suitable test cap for the job.
Special design of vacuum purge & refill tool connection fits nearly all type of radiator opening.
Test Range 0-35 psi (0-2.5 bar).
The following adapters for the following vehicles are Included:
Mercedes Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper, VW, BMW, Ford, Opel, Porsche, Audi, etc.
24-Piece Surface Sanding Preparation Kit
Quick-swap disks with hoop and loop adhesive backs for quickly changing disks.
Great for removing scratches, rusting, corrosion and gasket materials.
Great for polishing or Deburring on a variety of surfaces.
Also Included: 3 Arbors, Backing Pads, 6mm Shanks.
Grit Disks: 40, 60, 80, 100, 180mm.
Abrasive Pads: 1, 2 & 3''.
24-Piece Wire Brush Set
25-Piece Combination Spanner Set; 6-32mm
26-Piece Engine Timing Tool Set For BMW Engines, N42, N46
This kit has been designed to allows setting and adjusting of the timing on BMW models with N42, N46, B18/-A, B20/-A/-B engine codes.
Applications: BMW: 1, 3, 5, X3, Z4 (models: E87-46-60-85-83-90-91).
Contains important tools for camshaft assembly and disassembly also for valve timing of camshafts.
Included OEM tools:
clamps for intermediate lever: OEM 119310.
bearing bridge holder: OEM 119320.
Thumbscrew: OEM 119302.
Eccentric shaft holder: OEM 119301.
Camshaft locking tool: OEM 119290.
Camshaft locking tool (inlet): OEM 119302.
Clamping tool: OEM 11940.
Spring holder: 119390.
Camshaft sensor tool: OEM 119350.
Screw: OEM 119390.
Camshaft rotation key: OEM 119270.
Crankshaft locking tool (straight): OEM 112300.
Mounting bolts 3x: OEM 119320.
Screw: OEM 119290.
Camshaft locking tool, to be used as OEM 119290.
Crankshaft locking tool (angled): OEM 119190.
Mounting bolts: OEM 119320.
Setting tool for balancer shaft: OEM 119330.
26-Piece Master Oil Drain Plug Key Set
26-Piece Master Oil Drain Plug Key Set
New Master Set
For the removal of oil sump from 99% of all vehicles.
Includes new adapters for the new plastic oil sumps fitted to the new modern European vehicles.
This set includes the adaptors and drivers for plastic sump plugs as fitted to VW, Ford, Citroen & Peugeot engines.
Also Includes:
7 Hexagon socket bits: 8, 9, 10, 12, 13, 14 and 17mm.
9 Square socket bits: 7, 8, 10, 11, 12, 13,14mm, 5/16", 3/8".
1 square drive socket: 10mm.
1 triangle socket bits: 10mm.
1 spline (tamper) socket bits: M16.
1 Torx socket bits: T45.
1 3/8" drive sliding T-handle: 160mm.
1 3/8"Dr T-handle (80mm long, shank length 100mm).
1 3/8"Dr slot socket.
1 3/8"Dr to 1/4"Dr Hex adaptor.
1 10mm Hex bit with 1/4" Hex shank.
1 VAG oil plug bit with 1/4" Hex shank.
Can be used with air tools.
27-Piece Universal Press & Pull Sleeve Set
This precision tool kit is for extracting and drawing in bushes, bearing, seals, etc.
A widely applicable set suitable for a majority of cars, LGV and HGV. Can be used independently (manual operation) or with a suitably sized workshop press and can be reworked (e.g. recess, etc) depending on requirements.
28-Piece Bit Socket Torx Plus
28-Piece Heavy Duty Punch & Chisels
5 pin punches: 2.4 x 110 mm, 3.2 x 120 mm, 4 x 125 mm, 5 x 135 mm, 6.5 x 145mm.
5 tapered punches: 2.4 x 135 mm, 3.2 x 145 mm, 4 x 150 mm 5 x 160 mm, 6.5 x 170mm.
3 cold chisel: 9.5 x 140 mm, 12.5 x 150 mm, 16 x 165mm.
2 centre punches: 3 x 125 mm, 4.8 x 150mm.
6 cold chisel: 12.5 x 170 mm, 5 x 180 mm, 19 x 200 mm, 18 x 200 mm, 22 x 250 mm, 25 x 250mm.
4 cold chisel: 3 x 150 mm, 18 x 260 mm, 9.5 x 125 mm, 9.5 x 250mm.
2 centre punches made from high carbon steel 145 mm and 375mm.
1 chisel punch gauge.
3 Piece Nut Driver Set; 6, 7 & 8mm
3-Piece Ball Joint Separator
3-Piece Body Cutting Chisel Set
Ergonomic Design
Soft handles for safe and comfortable work
Reusable & Durable
Regrindable surface for extended usage
Made from hardened special steel for durability
Complete Set
Flat chisel with oval surface for versatile cutting
15? angled body cutting chisel with oval surface
90? angled body cutting chisel with oval surface
Gross weight: 1100 g