Plastic Clip Removal Plier 3-Jawed
Straight 3-Toothed Jaws to reach in wheel wells, under bumpers and behind the dash to remove retaining clips.
Remove plastic body fasteners and clips faster in nearly any location - the specially designed jaw angle helps access hard-to-reach places while providing maximum leverage to remove clips quickly and without damage.
The unique design lifts the centre pin and pulls the body clips without damaging anchors.
Eliminating the need to provide replacement clips.
Reusing these fasteners saves money and time searching for replacements of various shapes and sizes:
Applications: VAG Group, PAS, Renault, Fiat, Vauxhall-Opel, Ford-Volvo, Honda, Mitsubishi, Nissan-Infiniti, Mercedes, Chevrolet, Toyota, Lincoln, GMC-Cadillac, Chevrolet, Hyundai, Kia.
Plastic Clip Removal Plier 90-Degree
90° Jaws to reach in wheel wells, under bumpers and behind the dash to remove retaining clips.
Remove plastic body fasteners and clips faster in nearly any location - the specially designed jaw angle helps access hard-to-reach places while providing maximum leverage to remove clips quickly and without damage.
The unique design lifts the centre pin and pulls the body clips without damaging anchors.
Eliminating the need to provide replacement clips.
Reusing these fasteners saves money and time searching for replacements of various shapes and sizes:
Applications: VAG Group, PAS, Renault, Fiat, Vauxhall-Opel, Ford-Volvo, Honda, Mitsubishi, Nissan-Infiniti, Mercedes, Chevrolet, Toyota, Lincoln, GMC-Cadillac, Chevrolet, Hyundai, Kia.
Plastic Door Trim Plier With Swivel Head
Plastic Oil Drain Plug
Plastic Welding Kit
Plier Mate
Plier Set 3-Piece Set
Manufactured from hardened and tempered drop forged Chrome Vanadium steel.
Dual material comfort grip handles and black oxide finish for corrosion protection.
Induction hardened 55-65 HRC for cutting hard and soft wires.
Serrated jaws and precision ground cutting edges.
Finely ground polished heads.
Contents:
Combination Plier 175mm.
Side Cutter Plier 160mm.
Long Nose Plier 200mm.
Plier Set 9-Piece Mini Plier Set
ESP - Encapsulated Spring Pliers - spring loaded joint for superior ergonomics.
Dual dipped, chemical resistant handles provide added comfort and grip.
All jaws and cutting edges are heat-treated to provide performance and durability.
Forged alloy steel with black oxide and surface grind finish.
All pliers exceed ANSI and ASME standards.
Pliers For Locking Rings
The special design of the plier Tips enable the easy removal and replacement of wheel bearing Circlips that are without eyelets.
Professional and safe removal and replacement of the wheel bearing Circlip are almost impossible without this special tool.
Suitable e.g. for wheel bearing clips on; Citroen, Renault, Peugeot, Nissan, Citroen Xara, Renault Clio, Nissan Micra etc.
Pliers; Long Nose, Double Joint, 3-Piece
Due to the double joint, a large forceps mouth opening with small handle opening is possible.
Especially suitable for working in confined areas.
Packed in Plastic Storage Tray.
Double dip-coated handles.
Contents:
Long nose pliers, straight, 340 mm long.
Long nose pliers, slightly angled, 335 mm long.
Flat nose pliers, straight, 340 mm long.
Pneumatic Coils Spring Compressor; ”Spring-Mate
Powerful Compression
1000kg air-operated unit with safety locking guard for fast and secure road spring compression.
Versatile Compatibility
Supplied with two coated lower yokes and suspension strut clamp, suitable for a wide range of spring configurations and diameters.
Effortless Handling
Featuring a strut locating platform to facilitate easy suspension strut movement, reducing the need for heavy lifting.
Pneumatic Rotary Removal Tool
The 180 degree adjustable handle allows you to get in to hard to reach areas and confined spaces.
Variable speed control for a wide variety of applications, as well as use on different materials and conditions.
This tool comes with a variety of accessories that will help you perform a wide range of tasks.
It comes in a blow moulded case and contains the following accessories:
1 Cleaning Disc Wheel.
1 Medium Wire Wheel.
1 Course Wire Wheel.
1 Fine Wire Wheel.
1 Eraser Wheel.
Polishing Machine; Cordless
Porsche 911 Carrera 4 GTS Socket for Centre Wheel Lock Nut
Porta Power Kit; 10-Ton
For special operations on car bodies and fenders including lifting, pushing, pulling, straightening, spreading & bending tasks in auto body & frame repair.
Base features 90 degree V-base design, serrated saddle, male thread adapter, assorted extension tubes.
Includes hand pump, hose, cylinder ram, spreader ram, and rubber head.
75 mm hydraulic cylinder pressing width.
350 mm hydraulic pump length.
Maximum pressure: 10 tons.
Porta Power Kit; 4-Ton
For special operations on car bodies and fenders including lifting, pushing, pulling, straightening, spreading & bending tasks in auto body & frame repair.
Base features 90 degree V-base design, serrated saddle, male thread adapter, assorted extension tubes.
Includes hand pump, hose, cylinder ram, spreader ram, and rubber head.
75 mm hydraulic cylinder pressing width.
350 mm hydraulic pump length.
Maximum pressure: 4 tons.
Press & Pull Sleeve Set; 26-Piece
Universal tool for removing and installation of silent blocks, bushings, hydraulic bushings, oil seals, trailing arm bushes and wheel bearings etc.
Universal applications on Vans, Cars, SUVs and LGVs.
External Sleeve Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82mm.
Sleeve End Caps: 83 x 20mm.
Force Screw Threads: 10 x 1.5, 12 x 1.5, 14 x 1.5, 16 x 1.5mm.
Press and Pull Sleeve Kit; 24-Pieces
Specially Designed:
Universal Press & Pull Sleeve tool is designed for removing & installation of silent bushings, hydraulic bushings, ball bearings, oil seals, rubber bushings, etc.
Various Applications:
This set is ideal for different vehicle classes such as Cars, SUV, Vans & can be used with spindles & hydraulic workshop presses.
20 Pressure Sleeves with Control Cut-Out:
Inside Diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72mm.
Outside Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82mm.
4x Ballbearing Spindles: M10, 12, 14, 16.
Press for Workshops; 10 ton
Ideal for removal and installation of bearings, bushings, etc.
Can be used on work pieces up to 345 mm wide & 170-330mm tall.
Suitable for fixed mounting on workbenches.
Dimensions: (H) 1075 x (W) 620 x (D) 450mm.
Can be used on work pieces up to 345mmwide & 170-330mm tall.
Stroke of hydraulic cylinder: 90mm.
Add a Universal Press Support (40017-WW) to expand the amount of applications.
3-way adjustable support beam.
Professional Air Brake Bleeder
Specialist tool for air assisted bleeding of brake and clutch systems designed to separate the fluid and air via a diaphragm.
Connection hose also comes with a 1/4'' quick coupling, 370 cm length with safety valve.
Dimensions: 280 x 460mm.
5 litres brake fluid reservoir.
Comes with one adaptor E20 for most common brake systems.
Professional Air Brake Bleeder & Adaptor Set
Quick and Easy
Saves time as it uses compressed air allowing for multiple oil changes to be made simultaneously.
Long Lasting and Durable
Made from high quality steel.
Various Applications
For bleeding brakes and clutches for all ABS system vehicles.
Other Specifications
Working air pressure: 10-40 PSI.
Air consumption: 4.5 CFM at 30 PSI.
Tank Capacity: 5 Litres.
Air Inlet: 1/4" Male coupler.